Applications

30 products or recommendations for Applications
  • testo 350 - Analysis Box for exhaust gas analysis systems

    Order-Nr. 0632 3510

    The testo 350 is a rugged, easy-to-use exhaust gas analyzer designed to meet the highest demands when it comes to carrying out precise industrial emission measurements and providing proper data administration. The Analysis Box can be operated with up to 6 gas sensors, 5 of which are optional. This allows you to select freely from sensors for CO, NO, NO2, SO2, H2S, CxHy and CO2.
    • Increased measurement range for unlimited measurements even when gas concentrations are higher

    • Easy-to-change gas sensors and easy access to wearing parts

    • Sealed housing with built-in impact protection for use in harsh conditions

    • Easy operation of the analyzer unit via Control Unit or easyEmission software (both products available separately) 

    AED 4 631.00
    excl. VAT
  • testo 316-2 - Gas leak detector

    Order-Nr. 0632 3162

    Speedy and sure gas leak detection. The testo 316-2 provides you with a quick and reliable means of detecting methane, propane and hydrogen in the surrounding air. The gas concentration is displayed in the form of an easy-to-read bar and an alarm is triggered when a threshold is crossed.
    • 18-step bar for displaying gas concentration; additional maximum leakage display

    • Quick reaction time with built-in pump

    • Flexible gooseneck sensor for checking hard-to-reach pipes and places

    • Rechargeable batteries for longer performance

    AED 1 312.00
    excl. VAT
  • testo 340 - Flue gas analyzer for use in industry

    Order-Nr. 0632 3340

    Emission control in industry: the testo 340 flue gas analyzer gives you professional technology, easy handling and practical execution in one instrument. The high-performance testo 340 flue gas analyzer is fitted with an O2 sensor and can be equipped with up to 3 additional sensors.
    • Can measure CO, COlow, NO, NOlow, NO2 or SO2

    • Extended measuring range for use in environments with high gas concentrations

    • Precalibrated gas sensors for quick and easy sensor change

    • Integrated pressure difference and air flow measurements for mass flow calculations

    AED 3 543.00
    excl. VAT
  • testo 317-3 - CO meter for measuring CO in the surrounding air

    Order-Nr. 0632 3173

    Carbon monoxide is a killer. That’s why CO checks need to be carried out when a gas heating or boiler is being serviced or installed. The compact testo 317-3 CO meter is designed to provide you with a quick and reliable means of testing the surrounding air for carbon monoxide.
    • Ready to go: no zero phase

    • Alarm with adjustable thresholds

    • Carry case with belt clip and handstrap

    • 3-year CO sensor warranty

    AED 658.00
    excl. VAT
  • testo 350 - Control Unit for exhaust gas analysis systems

    Order-Nr. 0632 3511

    The testo 350 flue gas analyzer fulfils the highest requirements in industrial emission measurement: easy handling, accurate measuring technology and robust design are practical features which impress on a daily basis. The Control Unit is the supplement to the testo 350 analyzer unit (please order separately) – it enables you to control emission measurement.
    • testo 350 Analysis Box just as easy to use when not positioned at measurement site

    • Internal memory for receiving measurement data from the Analysis Box

    • Large graphic color display, robust, industrial-type housing

    • User-friendly application-specific menu guide

    AED 3 419.00
    excl. VAT
  • testo 316-1 - Gas leak detector

    Order-Nr. 0632 0316

    Speedy and sure detection of gas leaks in natural gas pipes. The testo 316-1 leak detector with two-stage visual alarm system is ideal for carrying out quick and reliable checks.
    • Speedy and sure leak detection in natural gas pipes

    • Audible and two-stage visual alarm that are triggered when a threshold is crossed

    • Flexible gooseneck sensor for hard-to-reach places

    • Tested by DVGW

    AED 860.00
    excl. VAT
  • testo 317-2 - Gas leak detector for new users

    Order-Nr. 0632 3172

    Do you want to test quickly and efficiently whether there is a gas leak on gas pipe connections? Let the reliable testo 317-2 gas leak detector support you in your task. The handy gas detector for new users detects methane and propane.
    • Display of gas concentration via bar display

    • Self-test of sensor after switching on

    • Pitch of alarm rises along with gas concentration

    • Battery monitoring with optical display

    AED 559.00
    excl. VAT
  • testo 315-3 - CO and CO2 meter for ambient measurements

    Order-Nr. 0632 3153

    The high-quality testo 315-3 is an easy-to-use, ruggedly designed CO and CO2 meter that enables you to carry out quick and reliable ambient measurements according to DIN EN 50543 standard.
    • High-precision electrochemical CO sensor, shock resistant infrared CO2 sensor

    • Visual and audible alarm when thresholds are breached – adjustable thresholds

    • Rugged design

    • TÜV certified according to DIN EN 50543 standard

    AED 3 354.00
    excl. VAT
  • testo 317-1 - Back pressure indicator

    Order-Nr. 0632 3170

    Gas leaks on heating systems can quickly become a problem, because breathing in poisonous gases leads to health risks or even a risk of death. With the testo 317-1 back pressure indicator you have a handy measuring instrument which detects escaping heating flue gases quickly and reliably.
    • Reliable detection of escaping flue gases

    • Flexible probe for inaccessible areas

    • Acoustic and visual alarm

    AED 396.00
    excl. VAT
  • testo 315-4 - Ambient CO measuring instrument

    Order-Nr. 0632 3155

    For quick, precise measurement of carbon monoxide in ambient air – in accordance with DIN EN 50543: The testo 315-4 CO measuring instrument is easy to operate, has a robust design and is of durable quality.

     
    • High-precision carbon monoxide measurement in ambient air

    • TÜV-tested according to EN 50543

    • Convenient, easy operation

    • Data can be printed out on site

    AED 1 651.00
    excl. VAT
  • testo gas detector - Gas detector

    Order-Nr. 0632 0323

    Testo's robust gas detector is a multi-range instrument for detecting methane, propane and hydrogen gases. It has a display which enables direct reading of the ppm-values.
    • Gas detector for methane, propane and hydrogen gases

    • Flexible probe extension for inaccessible areas

    • Acoustic signals on approaching the lower explosive limit

    • With alarm function: continuous tone and indication on the display on reaching the explosive limit

    AED 4 059.00
    excl. VAT
  • testo 315-3 with Bluetooth - CO and CO2 meter for ambient measurements

    Order-Nr. 0632 3154

    The high-quality testo 315-3 is an easy-to-use, ruggedly designed CO and CO2 meter that enables you to carry out quick and reliable ambient measurements according to DIN EN 50543 standard.
    • High-precision electrochemical CO sensor, shock resistant infrared CO2 sensor

    • Visual and audible alarm when thresholds are breached – adjustable thresholds

    • Rugged design

    • TÜV certified according to DIN EN 50543 standard

    AED 3 694.00
    excl. VAT
  • Modular flue gas probe, 335 mm, Ø 8 mm, Tmax 1000 °C

    Order-Nr. 0600 8764

    The modular flue gas probe with 335 mm long probe shaft including integrated thermocouple up to 1000 °C and quick-change click system (for quick replacement of the probe shaft).
    • Easy probe shaft replacement via quick-change click system

    • NO2/SO2 special hose (length: 2.2 m)

    • Flue gas path and temperature channel can be connected to the instrument via a bayonet lock

    • Integrated thermocouple probe for temperature measurements up to 1000 °C

    AED 1 681.00
    excl. VAT
  • Industrial probe kit 1200°C

    Order-Nr. 0600 7610

    Ideal for the extractive sampling of flue gas at high flue gas temperatures. The industrial probe kit 1200°C comprises a handle, a probe shaft up to 1200°C flue gas temperature, a 4 m long gas sampling hose, including inline filter (all three unheated) and a thermocouple type K.
    • Can be used in combination with testo 340 and testo 350

    • Additional inline filter to protect the gas sampling hose from contamination

    • Unheated sampling tube (1 200 °C) can be extended up to max. 3 m using optional extension tubes

    • Very easy to handle

    AED 3 870.00
    excl. VAT
  • Modular flue gas probe, 335 mm, Ø 8 mm, Tmax 500 °C

    Order-Nr. 0600 9766

    The modular flue gas probe with 335 mm long probe shaft including integrated thermocouple up to 500 °C and quick-change click system (for quick replacement of the probe shaft).
    • Easy probe shaft replacement via quick-change click system

    • NO2/SO2 special hose (length: 2.2 m)

    • Flue gas path and temperature channel can be connected to the instrument via a bayonet lock

    • Integrated thermocouple probe for temperature measurements up to 500 °C

    AED 1 045.00
    excl. VAT
  • Modular flue gas probe, 700 mm, Ø 8 mm, Tmax 500 °C

    Order-Nr. 0600 9767

    The modular flue gas probe with 700 mm long probe shaft including integrated thermocouple up to 500 °C and quick-change click system (for quick replacement of the probe shaft).
    • Easy probe shaft replacement via quick-change click system

    • NO2/SO2 special hose (length: 2.2 m)

    • Flue gas path and temperature channel can be connected to the instrument via a bayonet lock

    • Integrated thermocouple probe for temperature measurements up to 500 °C

    AED 1 269.00
    excl. VAT
  • Modular flue gas probe 700 mm, Ø 8 mm, Tmax 1000 °C

    Order-Nr. 0600 8765

    The modular flue gas probe with 700 mm long probe shaft including integrated thermocouple up to 1000 °C and quick-change click system (for quick replacement of the probe shaft).
    • Easy probe shaft replacement via quick-change click system

    • NO2/SO2 special hose (length: 2.2 m)

    • Flue gas path and temperature channel can be connected to the instrument via a bayonet lock

    • Integrated thermocouple probe for temperature measurements up to 1000 °C

    AED 2 025.00
    excl. VAT
  • Modular flue gas probe with pre-filter, Ø 14 mm, 700 mm, Tmax 1000°C

    Order-Nr. 0600 8767

    The modular flue gas probe with preliminary filter Ø 14 mm, 700 mm long probe shaft, thermocouple up to 1000 °C and quick-change click system (for quick probe shaft replacement).
    • Easy probe shaft replacement via quick-change click system

    • Preliminary filter offers protection from dusty flue gases

    • Flue gas path and temperature channel can be connected to the instrument via a bayonet lock

    • Integrated thermocouple probe for temperature measurements up to 1000 °C

    AED 2 739.00
    excl. VAT
  • Flue gas probe for industrial engines

    Order-Nr. 0600 7555

    The flue gas probe from Testo can be used to carry out efficient and reliable flue gas measurements on stationary industrial engines. It can be used at flue gas temperatures of up to 1,000 °C.
    • Additional particle filter in the hose provides protection from contamination

    • Probe shaft is easy to replace

    • Made of metal: no melting of the handle due to radiated heat from the flue gas duct

    • Temperature measurement possible with optional thermocouple

    AED 1 690.00
    excl. VAT
  • Stainless steel Pitot tube, length 750 mm - for measuring flow velocity, including temperature measurement

    Order-Nr. 0635 2042

    Robust Pitot tube for measuring flow velocity: the Pitot tube provides the optimum conditions, especially for higher flow velocities and for heavily contaminated flow. The 750 mm long Pitot tube has integrated temperature measurement and a connection hose with a maximum load capacity of up to 700 hPa (mbar).
    • For measuring flow velocity

    • Ideal for high flow velocities and heavily contaminated flow

    AED 2 627.00
    excl. VAT
30 Products found
Show More