Flue gas

The Testo flue gas analyzers with exchangeable, precalibrated flue gas sensors measure, analyse and document whether flue gas values are adhered. Irrespective of whether you carry out spot or long-term measurements, we offer a comprehensive range of gas sensors for the analysis of flue gases.

71 products or recommendations for Flue gas
  • testo 300 kit 1 with printer - Flue gas analyzer (O2, CO up to 4,000 ppm)

    Order-Nr. 0564 3002 71

    With this kit, you will be equipped for the most important measurements involving heating systems: the TÜV-tested testo 300 flue gas analyzer is supplied with O2 and CO sensor up to 4,000 ppm, basic flue gas probe, testo Bluetooth® printer, instrument case and practical accessories.
    • Fast and easy to operate: intuitive measurement menus and fast-response Smart-Touch display

    • Including O2 and CO sensor up to 4,000 ppm

    • Large 5-inch HD display – see all the system's measuring values at a glance

    • In the kit: testo 300 flue gas analyzer, including O2 and CO sensor up to 4,000 ppm, mains unit, basic flue gas probe, spare dirt filters, testo Bluetooth® printer, spare thermal paper, EasyHeat software, instrument case

    AED 5 678.40
    excl. VAT
  • testo 300 kit 1 - Flue gas analyzer (O2, CO up to 4,000 ppm)

    Order-Nr. 0564 3002 70

    With this kit, you will be equipped for the most important measurements involving heating systems: the TÜV-tested testo 300 flue gas analyzer is supplied with O2 and CO sensor up to 4,000 ppm, basic flue gas probe, instrument case and practical accessories.
    • Fast and easy to operate: intuitive measurement menus and fast-response Smart-Touch display

    • Including O2 and CO sensor up to 4,000 ppm

    • Large 5-inch HD display – see all the system's measuring values at a glance

    • In the kit: testo 300 flue gas analyzer, including O2 and CO sensor up to 4,000 ppm, mains unit, basic flue gas probe, spare dirt filters, EasyHeat software, instrument case

    AED 4 495.40
    excl. VAT
  • testo 300 Longlife kit 1 - Flue gas analyzer (O2, CO up to 4,000 ppm, NO - can be retrofitted)

    Order-Nr. 0564 3004 70

    Carry out installation and maintenance work on heating systems several times a day using the flue gas analyzer with Longlife sensors. The TÜV-tested testo 300 Longlife flue gas analyzer is supplied with O2 and CO sensor up to 4,000 ppm (NO - can be retrofitted), basic flue gas probe, case and practical accessories.
    • Intuitive, smart, efficient: intuitive measurement menus, fast-response Smart-Touch operation, on-site documentation, e-mailing of reports

    • Including O2 and CO sensor up to 4,000 ppm (NO sensor - can be retrofitted)

    • High-quality sensor technology with up to 6 years' service life

    • In the kit: testo 300 Longlife flue gas analyzer, including O2 and CO sensor up to 4,000 ppm, mains unit, basic flue gas probe, spare dirt filters, EasyHeat software, case

    AED 6 151.60
    excl. VAT
  • testo 300 Longlife kit 1 with printer - Flue gas analyzer (O2, CO up to 4,000 ppm, NO - can be retrofitted)

    Order-Nr. 0564 3004 71

    Carry out installation and maintenance work on heating systems several times a day using the flue gas analyzer with Longlife sensors. The TÜV-tested testo 300 Longlife flue gas analyzer is supplied with O2 and CO sensor up to 4,000 ppm (NO - can be retrofitted), basic flue gas probe, testo Bluetooth® printer, case and practical accessories.
    • Intuitive, smart, efficient: intuitive measurement menus, fast-response Smart-Touch operation, on-site documentation, e-mailing of reports

    • Including O2 and CO sensor up to 4,000 ppm (NO sensor - can be retrofitted)

    • High-quality sensor technology with up to 6 years' service life

    • In the kit: testo 300 Longlife flue gas analyzer, including O2 and CO sensor up to 4,000 ppm, mains unit, basic flue gas probe, spare dirt filters, testo Bluetooth® printer, spare thermal paper, EasyHeat software, case

    AED 7 334.60
    excl. VAT
  • testo 350 - Analysis Box for exhaust gas analysis systems

    Order-Nr. 0632 3510

    The testo 350 is a rugged, easy-to-use exhaust gas analyzer designed to meet the highest demands when it comes to carrying out precise industrial emission measurements and providing proper data administration. The Analysis Box can be operated with up to 6 gas sensors, 5 of which are optional. This allows you to select freely from sensors for CO, NO, NO2, SO2, H2S, CxHy and CO2.
    • Increased measurement range for unlimited measurements even when gas concentrations are higher

    • Easy-to-change gas sensors and easy access to wearing parts

    • Sealed housing with built-in impact protection for use in harsh conditions

    • Easy operation of the analyzer unit via Control Unit or easyEmission software (both products available separately) 

    AED 5 118.75
    excl. VAT
  • testo 340 - Flue gas analyzer for use in industry

    Order-Nr. 0632 3340

    Emission control in industry: the testo 340 flue gas analyzer gives you professional technology, easy handling and practical execution in one instrument. The high-performance testo 340 flue gas analyzer is fitted with an O2 sensor and can be equipped with up to 3 additional sensors.
    • Can measure CO, COlow, NO, NOlow, NO2 or SO2

    • Extended measuring range for use in environments with high gas concentrations

    • Precalibrated gas sensors for quick and easy sensor change

    • Integrated pressure difference and air flow measurements for mass flow calculations

    AED 3 908.45
    excl. VAT
  • testo 350 - Control Unit for exhaust gas analysis systems

    Order-Nr. 0632 3511

    The Control Unit is the supplement to the testo 350 analyzer unit (please order separately) – it enables you to control emission measurement. The testo 350 flue gas analyzer fulfils the highest requirements in industrial emission measurement: easy handling, accurate measuring technology and robust design are practical features which impress on a daily basis.
    • testo 350 Analysis Box just as easy to use when not positioned at measurement site

    • Internal memory for receiving measurement data from the Analysis Box

    • Large graphic color display, robust, industrial-type housing

    • User-friendly application-specific menu guide

    AED 3 771.95
    excl. VAT
  • Modular flue gas probe, 300 mm, Ø 8 mm, Tmax 500 °C, TÜV-tested

    Order-Nr. 0600 9761

    TÜV-tested modular flue gas probe with 300 mm long probe shaft including dirt filter and thermocouple. The quick-change click system enables quick, flexible replacement of the probe shaft.
    • Easy probe shaft replacement via quick-change click system

    • Flue gas path and temperature channel can be connected to the instrument via a bayonet lock

    • Integrated dirt filter protects instrument and sensors

    • Integrated thermocouple probe for temperature measurements up to 500 °C

    AED 1 073.80
    excl. VAT
  • Modular flue gas probe, 335 mm, Ø 8 mm, Tmax 1000 °C

    Order-Nr. 0600 8764

    The modular flue gas probe with 335 mm long probe shaft including integrated thermocouple up to 1000 °C and quick-change click system (for quick replacement of the probe shaft).
    • Easy probe shaft replacement via quick-change click system

    • NO2/SO2 special hose (length: 2.2 m)

    • Flue gas path and temperature channel can be connected to the instrument via a bayonet lock

    • Integrated thermocouple probe for temperature measurements up to 1000 °C

    AED 1 860.95
    excl. VAT
  • Industrial probe kit 1200°C

    Order-Nr. 0600 7610

    Ideal for the extractive sampling of flue gas at high flue gas temperatures. The industrial probe kit 1200°C comprises a handle, a probe shaft up to 1200°C flue gas temperature, a 4 m long gas sampling hose, including inline filter (all three unheated) and a thermocouple type K.
    • Can be used in combination with testo 340 and testo 350

    • Additional inline filter to protect the gas sampling hose from contamination

    • Unheated sampling tube (1 200 °C) can be extended up to max. 3 m using optional extension tubes

    • Very easy to handle

    AED 4 272.45
    excl. VAT
  • Modular flue gas probe, 335 mm, Ø 8 mm, Tmax 500 °C

    Order-Nr. 0600 9766

    The modular flue gas probe with 335 mm long probe shaft including integrated thermocouple up to 500 °C and quick-change click system (for quick replacement of the probe shaft).
    • Easy probe shaft replacement via quick-change click system

    • NO2/SO2 special hose (length: 2.2 m)

    • Flue gas path and temperature channel can be connected to the instrument via a bayonet lock

    • Integrated thermocouple probe for temperature measurements up to 500 °C

    AED 1 151.15
    excl. VAT
  • Modular flue gas probe, 700 mm, Ø 8 mm, Tmax 500 °C

    Order-Nr. 0600 9767

    The modular flue gas probe with 700 mm long probe shaft including integrated thermocouple up to 500 °C and quick-change click system (for quick replacement of the probe shaft).
    • Easy probe shaft replacement via quick-change click system

    • NO2/SO2 special hose (length: 2.2 m)

    • Flue gas path and temperature channel can be connected to the instrument via a bayonet lock

    • Integrated thermocouple probe for temperature measurements up to 500 °C

    AED 1 401.40
    excl. VAT
  • Modular flue gas probe 700 mm, Ø 8 mm, Tmax 1000 °C

    Order-Nr. 0600 8765

    The modular flue gas probe with 700 mm long probe shaft including integrated thermocouple up to 1000 °C and quick-change click system (for quick replacement of the probe shaft).
    • Easy probe shaft replacement via quick-change click system

    • NO2/SO2 special hose (length: 2.2 m)

    • Flue gas path and temperature channel can be connected to the instrument via a bayonet lock

    • Integrated thermocouple probe for temperature measurements up to 1000 °C

    AED 2 234.05
    excl. VAT
  • Mini ambient air probe for flue gas analyzers

    Order-Nr. 0600 3692

    Use the mini ambient air probe for direct measurement of ambient air temperature on the flue gas analyzer.
    • Can be plugged directly into the flue gas analyzer 

    • Shock-resistant thanks to plastic basket

    • Measuring range: 0 to +80 °C

    AED 232.05
    excl. VAT
  • Modular flue gas probe with pre-filter, Ø 14 mm, 700 mm, Tmax 1000°C

    Order-Nr. 0600 8767

    The modular flue gas probe with preliminary filter Ø 14 mm, 700 mm long probe shaft, thermocouple up to 1000 °C and quick-change click system (for quick probe shaft replacement).
    • Easy probe shaft replacement via quick-change click system

    • Preliminary filter offers protection from dusty flue gases

    • Flue gas path and temperature channel can be connected to the instrument via a bayonet lock

    • Integrated thermocouple probe for temperature measurements up to 1000 °C

    AED 3 025.75
    excl. VAT
  • Modular flue gas probe, 180 mm, Ø 8 mm, Tmax 500 °C, TÜV-tested

    Order-Nr. 0600 9760

    TÜV-tested modular flue gas probe with 180 mm long probe shaft including dirt filter and thermocouple. The quick-change click system enables quick, flexible replacement of the probe shaft.
    • Easy probe shaft replacement via quick-change click system

    • Flue gas path and temperature channel can be connected to the instrument via a bayonet lock

    • Integrated dirt filter protects instrument and sensors

    • Integrated thermocouple probe for temperature measurements up to 500 °C

    AED 1 051.05
    excl. VAT
  • Compact basic flue gas probe, 300 mm, Ø 6 mm, Tmax 500 °C

    Order-Nr. 0600 9741

    Compact flue gas probe with 300 mm long probe shaft including particle filter and thermocouple. Bayonet lock ensures quick, easy connection to the measuring instrument.
    • Flue gas path, draught path and temperature probe can be connected via a single probe coupling

    • Easy-to-replace dirt filter

    • Temperatures of up to 500 °C can be measured thanks to the thermocouple probe

    • Includes practical cone for attachment

    AED 737.10
    excl. VAT
  • Compact basic flue gas probe, 180 mm, Ø 6 mm, Tmax 500 °C

    Order-Nr. 0600 9740

    Compact basic flue gas probe with 180 mm long probe shaft, integrated thermocouple and dirt filter.
    • Flue gas path and temperature channel can be connected to the instrument via a bayonet lock

    • Integrated dirt filter protects instrument and sensors

    • Integrated thermocouple probe for temperature measurements up to 500 °C

    • Includes practical cone for attachment

    AED 677.95
    excl. VAT
  • Industrial probe preliminary filter

    Order-Nr. 0600 7616

    For measurements in dust-laden flue gas: the filter enables you to prevent the probe shaft and sampling hose from becoming clogged with dust or particles and from getting damaged by dust.
    • Prevents the probe shaft and sampling hose from becoming clogged with dust

    • For measurements in dust-laden flue gas

    • Operating temperature up to 1000 °C

    • Diameter: 30 mm, length: 110 mm

    AED 1 328.60
    excl. VAT
  • Flue gas probe for industrial engines

    Order-Nr. 0600 7555

    The flue gas probe from Testo can be used to carry out efficient and reliable flue gas measurements on stationary industrial engines. It can be used at flue gas temperatures of up to 1,000 °C.
    • Additional particle filter in the hose provides protection from contamination

    • Probe shaft is easy to replace

    • Made of metal: no melting of the handle due to radiated heat from the flue gas duct

    • Temperature measurement possible with optional thermocouple

    AED 1 860.95
    excl. VAT
71 Products found
Show More