United Arab Emirates
  1. Home
  2. Service Org. Manufactures

Service Org. Manufactures

18 products or recommendations for Service Org. Manufactures
  • flue gas probe

    Modular flue gas probe, 300 mm, Ø 8 mm, Tmax 500 °C, TÜV-tested

    Order-Nr. 0600 9761

    TÜV-tested modular flue gas probe with 300 mm long probe shaft including dirt filter and thermocouple. The quick-change click system enables quick, flexible replacement of the probe shaft.

    • Easy probe shaft replacement via quick-change click system

    • Flue gas path and temperature channel can be connected to the instrument via a bayonet lock

    • Integrated dirt filter protects instrument and sensors

    • Integrated thermocouple probe for temperature measurements up to 500 °C

    AED 972.00
    excl. VAT
    Details
  • Combustion air temperature probe

    Combustion air temperature probe (190 mm immersion depth)

    Order-Nr. 0600 9787

    The probe is used for the specific measurement of combustion air temperature within the context of flue gas or particulate matter measurements.

    • Flexible positioning (immersion depth 190 mm, cable length 2.2 m) 

    • Cone for attachment included

    • Measuring range: 0 to +100 °C

    AED 409.00
    excl. VAT
    Details
  • clearance-probe-for-O2-supply-air-measurement

    Dual wall clearance probe for O2 supply air measurement

    Order-Nr. 0632 1260

    The dual wall clearance probe (in combination with the appropriate measuring instrument) enables easy and reliable measurement of O2 supply air in the dual wall clearance. In addition, it can also be used to check the dual wall clearance for leaks and blockages.

    • Detection of leaks and blockages in the dual wall clearance

    • Curved probe for easy insertion into the dual wall clearance

    AED 550.00
    excl. VAT
    Details
  • Mini ambient air probe

    Mini ambient air probe for flue gas analyzers

    Order-Nr. 0600 3692

    Use the mini ambient air probe for direct measurement of ambient air temperature on the flue gas analyzer.

    • Can be plugged directly into the flue gas analyzer 

    • Shock-resistant thanks to plastic basket

    • Measuring range: 0 to +80 °C

    AED 211.00
    excl. VAT
    Details
  • 0600-9760-flue-gas-probe-modular-1

    Modular flue gas probe, 180 mm, Ø 8 mm, Tmax 500 °C, TÜV-tested

    Order-Nr. 0600 9760

    TÜV-tested modular flue gas probe with 180 mm long probe shaft including dirt filter and thermocouple. The quick-change click system enables quick, flexible replacement of the probe shaft.

    • Easy probe shaft replacement via quick-change click system

    • Flue gas path and temperature channel can be connected to the instrument via a bayonet lock

    • Integrated dirt filter protects instrument and sensors

    • Integrated thermocouple probe for temperature measurements up to 500 °C

    AED 950.00
    excl. VAT
    Details
  • Flue gas probe compact

    Compact basic flue gas probe, 300 mm, Ø 6 mm, Tmax 500 °C

    Order-Nr. 0600 9741

    Compact flue gas probe with 300 mm long probe shaft including particle filter and thermocouple. Bayonet lock ensures quick, easy connection to the measuring instrument.

    • Flue gas path, draught path and temperature probe can be connected via a single probe coupling

    • Easy-to-replace dirt filter

    • Temperatures of up to 500 °C can be measured thanks to the thermocouple probe

    • Includes practical cone for attachment

    AED 662.00
    excl. VAT
    Details
  • Flue gas probe compact 180 mm 0600 9740

    Compact basic flue gas probe, 180 mm, Ø 6 mm, Tmax 500 °C

    Order-Nr. 0600 9740

    Compact basic flue gas probe with 180 mm long probe shaft, integrated thermocouple and dirt filter.

    • Flue gas path and temperature channel can be connected to the instrument via a bayonet lock

    • Integrated dirt filter protects instrument and sensors

    • Integrated thermocouple probe for temperature measurements up to 500 °C

    • Includes practical cone for attachment

    AED 615.00
    excl. VAT
    Details
  • 0600-9765-flue-gas-probe

    Solid fuel set (probe shaft, adapter)

    Order-Nr. 0600 9765

    The practical kit, including modular probe shaft (length 290 mm, Ø 8 mm), solid fuel adapter, cone and gas sampling hose with integrated condensate trap, means you are ideally equipped for precise solid fuel measurement.

    • Ideal for precise solid fuel measurements

    • Temperature measurements up to 300°C

    • Included in the kit: modular probe shaft with pre-filter, solid fuel adapter, cone, gas sampling hose with integrated condensate trap

    AED 1 587.00
    excl. VAT
    Details
  • fine pressure probe

    Fine pressure probe - for heating system checks / 4 pascal measurement

    Order-Nr. 0638 0330

    The fine pressure probe (with the appropriate flue gas analyzer and accessories) is ideally suited for carrying out heating system checks and 4 pascal measurement.

    • Carrying out heating system checks and 4 pascal measurement with compatible flue gas analyzer and accessories

    • Simultaneous measurement of gas pressure and flue gas values

    • No zero point drift during pressure measurement (cyclic zeroing)

    AED 1 075.00
    excl. VAT
    Details
  • Combustion air temperatur probe

    Combustion air temperature probe, immersion depth 60 mm

    Order-Nr. 0600 9797

    The probe is used for the targeted measurement of combustion air temperature in the context of flue gas or fine particle measurements.

    • Flexible positioning (immersion depth 60 mm, cable length 2.2 m)

    • Cone for attachment included in the scope of delivery

    • Measuring range: 0 to +100°C

    AED 409.00
    excl. VAT
    Details
  • Flexible probe shaft

    Flexible flue gas probe

    Order-Nr. 0600 9770

    Our flexible flue gas probe helps you to carry out flue gas measurements even on difficult-to-access measurement apertures. Since the probe shaft is made of very flexible plastic, you can easily bend it, allowing it to be inserted into exhaust flues which are obstructed (e.g. by sloping ceilings).

    • For flue gas measurements on heating system burners

    • With extremely flexible plastic probe shaft

    • Used for measurements at difficult-to-access measurement sites

    • Connectable to flue gas analyzer by bayonet fitting

    AED 1 238.00
    excl. VAT
    Details
  • 0600-9763-flue-gas-probe-1

    Modular flue gas probe, 300 mm, Ø 6 mm, Tmax 500°C

    Order-Nr. 0600 9763

    Modular flue gas probe with 300 mm long probe shaft, including dirt filter and thermocouple. The quick-change click system enables quick, flexible replacement of the probe shaft.

    • Easy probe shaft change via quick-change click system

    • Flue gas path and temperature channel can be connected to the instrument via a bayonet lock

    • Integrated dirt filter protects instrument and sensors

    • Integrated thermocouple probe for temperature measurements up to 500°C

    AED 976.00
    excl. VAT
    Details
  • 0600-9762.jpg

    Modular flue gas probe, 180 mm, Ø 6 mm, Tmax 500°C

    Order-Nr. 0600 9762

    Modular flue gas probe with 180 mm long probe shaft, including dirt filter and thermocouple. The quick-change click system enables quick, flexible replacement of the probe shaft.

    • Easy probe shaft change via quick-change click system

    • Flue gas path and temperature channel can be connected to the instrument via a bayonet lock

    • Integrated dirt filter protects instrument and sensors

    • Integrated thermocouple probe for temperature measurements up to 500°C

    AED 946.00
    excl. VAT
    Details
  • Flue gas probe 180mm, 8mm

    Flue gas probe 180 mm, diameter 8 mm

    Order-Nr. 0600 9780

    Modular flue gas probe with a probe length of 180 mm and a diameter of 8 mm, including cone and short, flexible hose for straightforward set-up and dismantling. This flue gas probe can also be attached to the flue gas pipe using the optional testoFix probe holder.

    • Thermocouple NiCr-Ni, Tmax: 500 °C

    • Flexible hose (650 mm)

    • Dirt filter

    • TÜV-tested

    AED 813.00
    excl. VAT
    Details
  • Flue gas probe 300mm, 8mm

    Flue gas probe 300 mm, diameter 8 mm

    Order-Nr. 0600 9781

    Modular flue gas probe with a probe length of 300 mm and a diameter of 8 mm, with a cone for attaching it in the measurement aperture. However, the flue gas probe can also be securely and reliably attached to the flue gas pipe using the optional testoFix probe holder. The hose between probe and measuring instrument is shorter and more flexible than before, which makes set-up and dismantling significantly easier.

    • Thermocouple NiCr-Ni, Tmax: 500 °C

    • Flexible hose (650 mm)

    • Dirt filter

    • TÜV-tested

    AED 856.00
    excl. VAT
    Details
  • Flue gas probe 300mm, 6mm

    Flue gas probe 300 mm, diameter 6 mm

    Order-Nr. 0600 9783

    Modular flue gas probe, probe length 300 mm, diameter 6 mm, with cone. The testoFix probe holder is available for this probe as an optional accessory. Use this to attach the flue gas probe to the flue gas pipe quickly and securely. The probe hose is shorter (650 mm) and more flexible than before, to make your work easier.

    • Thermocouple NiCr-Ni, Tmax: 500 °C

    • Flexible hose (650 mm)

    • Dirt filter

    • TÜV-tested

    AED 856.00
    excl. VAT
    Details
  • Flue gas probe 180mm, 6mm

    Flue gas probe 180 mm, diameter 6 mm

    Order-Nr. 0600 9782

    Modular flue gas probe, probe length 180 mm, diameter 6 mm, with a cone for attaching it in the measurement aperture. However, you can also attach this flue gas probe to the flue gas pipe securely and reliably using the testoFix probe holder. New: short, flexible hose for easier handling.

     

    • Thermocouple NiCr-Ni, Tmax: 500 °C

    • Flexible hose (650 mm)

    • Dirt filter

    • TÜV-tested

    AED 813.00
    excl. VAT
    Details
18 Products found