Buildings & construction - Structual defects and building quality

25 products or recommendations for Buildings & construction - Structual defects and building quality
  • testo Smart Probes AC & refrigeration test kit plus

    Order-Nr. 0563 0002 41

    For refrigeration engineers: The kit contains two testo 549i high-pressure gauges, two testo 605i thermohygrometers and two testo 115i clamp thermometers. Used in conjunction with your smartphone/tablet, the kit is ideal for servicing, troubleshooting and installing air conditioning and refrigeration systems. The testo Smart Probes App makes your work easier and more efficient: over 90 stored refrigerants, automatic calculation of superheating/subcooling, target superheat and cooling/heating power, emailing of measurement data reports as PDF or Excel files.
    • Application-specific measurement menus for superheating/subcooling, target superheat, heating/cooling power

    • More than 90 common refrigerants plus refrigerant updates in the testo Smart Probes App

    • 100 m Bluetooth® range for particularly flexible applications

    • Transmission and analysis of measurement data via testo Smart Probes App

  • testo Smart Probes VAC kit

    Order-Nr. 0563 0003 10

    For air-conditioning engineers: Compact kit containing four measuring instruments for your most important measuring tasks in, on and involving air conditioning systems. The testo Smart Probes App enables you to work more easily and efficiently: Use intuitive measurement menus for volume flow measurement, for automatic calculation of the dew point and wet bulb temperature or for detecting areas susceptible to mould according to the traffic light principle. Measurement data reports can be emailed directly as a PDF or Excel file.
    • Measurement of air and surface temperature, humidity, air velocity and volume flow

    • Measurement menus for volume flow measurement in ducts and at outlets, identification of mould risk, easy image documentation including IR temperature reading and measurement spot marking

    • Display measurement data as a graph or table and analyze and send via testo Smart Probes App

    • In conjunction with your smartphone/tablet, carry out the most important measurements involved in air conditioning systems

  • Temperature probe

    Order-Nr. 0636 9735

    Temperature probe
    • Humidity sensor with long-term stability

    • Temperature measuring range: -20 to +70 °C

    $595.00
    incl. GST  $654.50
  • temperature probe Ø 12 mm

    Order-Nr. 0636 9743

    temperature probe Ø 12 mm
    • High-precision humidity measurement: accuracy of up to ±1% RH

    • Intelligent calibration concept

    • Temperature measuring range: -20 to +70 °C

    $669.00
    incl. GST  $735.90
  • Robust humidity probe

    Order-Nr. 0636 2161

    In combination with the testo 635, the robust humidity probe measures the humidity and temperature of the air. Because the probe can be used up to 125 °C, it also enables measurements in air exhaust ducts. In addition, it is suitable for measuring the material equilibrium moisture content, for example in bulk materials.
    • Probe for relative humidity and air temperature measurements

    • Measurements of the material equilibrium moisture content possible

    • Temperature measuring range: -20 to +125 °C (briefly up to +140 °C)

    $948.00
    incl. GST  $1 042.80
  • Compact professional humidity module

    Order-Nr. 0636 9736

    The humidity module can be attached to various Testo radio handles. It enables a high level of accuracy thanks to the precise humidity sensor.

    Wireless handle (0554 0189) and wireless module (0554 0188) are required to use a radio probe, and these can be ordered optionally.
    • For wireless humidity and temperature measurements

    • Can be attached to different Testo radio handles (available to order separately)

    • High precision in humidity measurement

    • Temperature measuring range: -20 to +70 °C

    $332.00
    incl. GST  $365.20
  • Highly accurate temperature probe

    Order-Nr. 0636 9741

    Highly accurate temperature probe
    • High-precision humidity measurement: accuracy of up to ±1% RH

    • Probe shaft diameter of 21 mm: Use with different sintered caps possible

    • Can be used in the high humidity range

    • Temperature measuring range: -20 to +70 °C

    $1 120.00
    incl. GST  $1 232.00
  • Standard humidity/temperature probe (Ø 21 mm)

    Order-Nr. 0636 9740

    The standard humidity/temperature probe means you can check the indoor air climate quickly and reliably.
    • Probe shaft diameter of 21 mm

    • Fast response time for air temperature measurement

    • Temperature measuring range: -20 to +70 °C

    $729.00
    incl. GST  $801.90
  • Thin humidity probe - for material moisture

    Order-Nr. 0636 2135

    The slim humidity probe measures material moisture via the equilibrium moisture content and can very easily be used in recesses or bore holes thanks to its slim design and remote electronics. The material moisture can also be determined directly in the instrument in combination with the testo 635 temperature and humidity measuring instrument.

     
    • Measurement of the material moisture via the equilibrium moisture content

    • Slim design (Ø 4 mm) with remote electronics – ideal for tight measuring points

    $777.00
    incl. GST  $854.70
  • Robust humidity probe for temperatures of up to +180 °C

    Order-Nr. 0636 9753

    This robust humidity probe can be used for the simultaneous measurement of temperature and relative humidity. The probe's wide temperature range of up to +180 °C means that you can measure the moisture content in industrial exhaust air, for example.
    • Robust humidity probe measures temperature and relative humidity

    • Measurements are possible up to +180 °C, for example in industrial exhaust air or in air-conditioning cabinets

    • Automatic calculation of absolute humidity, dew point, wet bulb temperature and enthalpy

    • Zero-error display thanks to an intelligent calibration concept

    $935.00
    incl. GST  $1 028.50
  • Robust high-temperature/humidity probe (up to +180 °C)

    Order-Nr. 0628 0021

    The robust high-temperature/humidity probe (with a corresponding measuring instrument) is suitable for reliably determining the temperature and relative humidity even at high temperatures (up to +180 °C).
    • Probe for temperature and relative humidity – suitable for high temperatures

    • Probe shaft diameter of 12 mm with the option of using a PTFE or stainless steel sintered cap

    • Temperature measuring range: -20 to +180 °C

    $1 967.00
    incl. GST  $2 163.70
  • Scatter field probe for fast and damage-free material moistu...

    Order-Nr. 0636 6160

    Scatter field probe for fast and damage-free material moisture measurement, with probe cable 1.2 m
    $585.00
    incl. GST  $643.50
  • Flexible humidity probe

    Order-Nr. 0628 0022

    Flexible humidity probe (does not retain shape) for measurements in inaccessible places
    $2 074.00
    incl. GST  $2 281.40
  • Humidity/temperature probe

    Order-Nr. 0636 9742

    Temperature probe
    $807.00
    incl. GST  $887.70
  • Thin humidity probe incl. 4 attachable protection caps

    Order-Nr. 0636 2130

    Thin probe incl. 4 attachable protection caps for ambient air measurements, measurements in exhaust air ducts and equilibrium moisture measurements
    $1 109.00
    incl. GST  $1 219.90
  • High humidity level probe

    Order-Nr. 0636 2142

    High humidity level probe w/ heated sensor element, no humidity on sensor
    $1 696.00
    incl. GST  $1 865.60
  • Robust humidity probe e.g. for measuring equilibrium moistur...

    Order-Nr. 0636 2140

    Robust humidity probe e.g. for measuring equilibrium moisture or for measurements in exhaust ducts to +120°C
    $1 235.00
    incl. GST  $1 358.50
  • Humidity module, upgradeable

    Order-Nr. 0636 9784

    Humidity module, upgradeable for testo 845
    $356.00
    incl. GST  $391.60
  • Control and adjustment set for Testo humidity probes

    Order-Nr. 0554 0660

    Control and adjustment set for Testo humidity probes, salt solution with 11.3% RH and 75.3% RH, incl. adapter for Testo humidity probes
    $514.00
    incl. GST  $565.40
  • Sintered PTFE filter, Ø 12 mm, for corrosive media

    Order-Nr. 0554 0756

    Sintered PTFE filter, Ø 12 mm, for corrosive media
    $89.00
    incl. GST  $97.90
25 Products found
Show More