Efficiency testing on ships

On ships, as little visible smoke should be produced as possible, and the soot content kept to a minimum. A high soot content on deck can lead to the danger of soot deposits on the passengers. In order to test whether the smoke count of marine diesel engines does not exceed the prescribed limit values, shipping companies (and port authorities) can use a smoke tester. Use of the instrument provides clarity regarding the smoke values. In shipbuilding, the smoke count also plays an important part. After individual components have been assembled (engine, diesel particle filter, exhaust pipe), the soot emissions should be tested. In addition to this, for environmental reasons the customers often make demands regarding the emission values, and require proof of the soot emission in the diesel exhaust. The correct functioning of the diesel particle filter can also be testing using a degree of blackening measurement.

Filter
Filter (26 results found)
Filter by Parameters Category

Filter by Product Type Category

Filter by Target Group Category

Relevance
  • Sort by
  • Relevance
  • Name (ascending)
  • Price (lower first)
  • Price (highest first)
  • Name (descending)
26 products or recommendations for Efficiency testing on ships
  • testo 350

    testo 350 - Analysis Box for exhaust gas analysis systems

    Order-Nr. 0632 3510

    Price on Request
    • Increased measurement range for unlimited measurements even when gas concentrations are higher
    • Easy-to-change gas sensors and easy access to wearing parts
  • testo 340

    testo 340 - Flue Gas Analyser 

    Order-Nr. 0632 3340

    Price on Request
    • Direct measurement of 4-gases simultaneously 
    • CO range extension 50,000 PPM 
  • testo 350

    testo 350 - Control Unit for exhaust gas analysis systems

    Order-Nr. 0632 3511

    Price on Request
    • User-friendly application-specific menu guide
    • testo 350 Analysis Box just as easy to use when not positioned at measurement site
  • testo 350 Maritime

    testo 350 MARITIME - Exhaust gas analyzer for diesel ship engines

    Order-Nr. 0563 3503

    Price on Request
    • With DNV GL and NK certificate according to MARPOL Annexe VI and NOx Technical Code 2008
    • Unrestricted availability thanks to pre-calibrated gas sensors which are exchangeable on site
  • testo 338

    testo 338 - Smoke tester

    Order-Nr. 0632 3382

    Price on Request
    • Handy and robust: easily possible to carry to the desired application site
    • Determination of soot concentration (mg/m3) as well as Filter Smoke Number (FSN) or Bosch number
  • testo 338

    testo 338 - Smoke tester

    Order-Nr. 0632 3381

    Price on Request
    • Handy and robust Easily possible to carry to the desired application site
    • Determination of soot concentration (mg/m3) as well as Filter Smoke Number (FSN) or Bosch number
  • Modular flue gas probe

    Modular flue gas probe, 335 mm, Ø 8 mm, Tmax 1000 °C

    Order-Nr. 0600 8764

    $1 258.00
    incl. GST  $1 383.80
    • Easy probe shaft replacement via quick-change click system
    • NO2/SO2 special hose (length: 2.2 m)
    Details
  • 0600-7610

    Industrial probe kit 1200°C

    Order-Nr. 0600 7610

    $2 885.00
    incl. GST  $3 173.50
    • Very easy to handle
    • Can be used in combination with testo 340 and testo 350
    Details
  • 0600-9766-modular-flue-gas-probe

    Modular flue gas probe, 335 mm, Ø 8 mm, Tmax 500 °C

    Order-Nr. 0600 9766

    $778.00
    incl. GST  $855.80
    • Easy probe shaft replacement via quick-change click system
    • NO2/SO2 special hose (length: 2.2 m)
    Details
  • Modular flue gas probe, 700 mm, 500 °C

    Modular flue gas probe, 700 mm, Ø 8 mm, Tmax 500 °C

    Order-Nr. 0600 9767

    $947.00
    incl. GST  $1 041.70
    • Easy probe shaft replacement via quick-change click system
    • NO2/SO2 special hose (length: 2.2 m)
    Details
  • Flue gas probe modular 700 mm 500 °C 0600 876

    Modular flue gas probe 700 mm, Ø 8 mm, Tmax 1000 °C

    Order-Nr. 0600 8765

    $1 507.00
    incl. GST  $1 657.70
    • Easy probe shaft replacement via quick-change click system
    • NO2/SO2 special hose (length: 2.2 m)
    Details
  • Flue gas probe modular 335 mm 1000 °C prefilter 0600 8767

    Modular flue gas probe with pre-filter, Ø 14 mm, 700 mm, Tmax 1000°C

    Order-Nr. 0600 8767

    $2 042.00
    incl. GST  $2 246.20
    • Easy probe shaft replacement via quick-change click system
    • Preliminary filter offers protection from dusty flue gases
    Details
  • Flue gas probe for industrial engines

    Flue gas probe for industrial engines

    Order-Nr. 0600 7555

    $1 257.00
    incl. GST  $1 382.70
    • Made of metal: no melting of the handle due to radiated heat from the flue gas duct
    • Additional particle filter in the hose provides protection from contamination
    Details
  • Pitot tube, stainless steel, 750 mm

    Stainless steel Pitot tube, length 750 mm - for measuring flow velocity, including temperature measurement

    Order-Nr. 0635 2042

    $1 961.00
    incl. GST  $2 157.10
    • For measuring flow velocity
    • Ideal for high flow velocities and heavily contaminated flow
    Details
  • Modular flue gas probe

    Modular flue gas probe with pre-filter, 335 mm, Ø 14 mm, Tmax 1000°C

    Order-Nr. 0600 8766

    $1 816.00
    incl. GST  $1 997.60
    • Easy probe shaft replacement via quick-change click system
    • Preliminary filter offers protection from dusty flue gases
    Details
  • 0600-8898-probe-temperature-005763.jpg

    Thermocouple for exhaust gas temperature measurement

    Order-Nr. 0600 8898

    $876.00
    incl. GST  $963.60
    • Temperature measurement in parallel with the flue gas measurement on industrial engines
    • Thermocouple with fast response time
    Details
  • testo easyEmission software

    Software "easyEmission" - incl. USB

    Order-Nr. 0554 3334

    $643.00
    incl. GST  $707.30
    • Convenient measurement data management
    • Including USB connection cable
    Details
  • Industrial probe set heated

    Heated industrial probe set

    Order-Nr. 0600 7630

    $12 154.00
    incl. GST  $13 369.40
    • A high degree of measuring accuracy, even if the flue gas contains high concentrations of NO2 or SO2
    • Measurements in applications with flue gas temperatures of up to 600 °C
    Details
  • Flue gas probe with preliminary filter

    Flue gas probe with preliminary filter for industrial engines

    Order-Nr. 0600 7556

    $1 531.00
    incl. GST  $1 684.10
    • Useful for measurements on diesel engines: preliminary filter provides protection from diesel particulates
    • Made of metal: no melting of the handle due to radiated heat from the flue gas duct
    Details
  • 0600-7620-probe-emission-005498.jpg

    Industrial probe kit 1800°C

    Order-Nr. 0600 7620

    $1 568.00
    incl. GST  $1 724.80
    • Very easy to handle
    • Measurements in applications involving high flue gas temperatures of up to 1 800 °C
    Details
  • 0516-3510

    Transport case for secure and tidy storage

    Order-Nr. 0516 3510

    $549.00
    incl. GST  $603.90
    • Secure, neat storage of measuring instrument, probes and accessories
    Details
  • EasyKool PC software

    EasyKool PC software - with measurement data management

    Order-Nr. 0554 5604

    $482.00
    incl. GST  $530.20
    • Easy to use
    • Reliable measurement data management
    Details
  • Accessory emission

    Software "easyEmission" - including Testo data bus controller with instrument-PC USB connection

    Order-Nr. 0554 3336

    $3 772.00
    incl. GST  $4 149.20
    • Controlling and reading out several measuring instruments on the PC
    • Convenient measurement data management
    Details
  • Analog output box

    Analog output unit kit

    Order-Nr. 0554 3149

    $2 036.00
    incl. GST  $2 239.60
    • Output of 6 measurement channels as analog signals (4 to 20mA)
    • Included in the kit: analog output unit, Testo data bus connection cable (length 2 m), Testo data bus terminal
    Details
26 results found
Show More