Flue gas

Domestic, Commercial & Industrial Boilers

 
The Testo combustion gas analyser series consists of three analysers, The testo 310, Testo 320 & Testo 330. These analysers come with an integrated NOx filter which eliminates cross-sensitivity errors of CO measurements. In addition these analysers come CO over range protection which prevents the gas analysers form overranging the CO sensor. For more detailed comparison of our testo combustion gas analysers please click on the gas analyser comparison button to the right of your screen.
 
Did you know: The Testo 320 & 330 have 20 pre-pre programmed fuels, making them the most versatile gas analysers on the market, and they can be operated by a smartphone.

Vehicular and Stationary exhaust gas and emissions
 

Testo exhaust gas & emission analyser series consist of the Testo 340 & Testo 350. The Testo 340 is a 4 cell gas analysers which is the ultimate analyser for portable combustion and engine tuning. With the testo 340 you get a choice of O2, CO, COlow, NO, NOlow, NO2, and SO2 to suit ones individual needs. 
The Testo 350 Multiple Gas Analysis System provides a complete emissions monitoring solution without sacrificing ease of use.
When it comes to heavy duty applications, the Testo 350 gas analyser is known for its reliability and accuracy. The Testo 350 in particular supports the direct measurement of 6 gases from a range of 10 sensors, not to mention the many other parameters necessary for managing the environment, efficiency and commissioning.
 
Did you know: All Testo 340 and 350 sensors are pre-calibrated, which means the gas analysers don’t need to be sent back to the service centre for calibration. The analysers come with an intelligent diagnostic system which notifies the users of the condition of the instrument including sensors and pumps.

72 Products found
  • testo 350 - Analysis Box for exhaust gas analysis systems

    Order-Nr. 0632 3510

    The testo 350 is a rugged, easy-to-use exhaust gas analyzer designed to meet the highest demands when it comes to carrying out precise industrial emission measurements and providing proper data administration. The Analysis Box can be operated with up to 6 gas sensors, 5 of which are optional. This allows you to select freely from sensors for CO, NO, NO2, SO2, H2S, CxHy and CO2.

    • Increased measurement range for unlimited measurements even when gas concentrations are higher

    • Easy-to-change gas sensors and easy access to wearing parts

    • Sealed housing with built-in impact protection for use in harsh conditions

    • Automatic processing of measuring programmes over a longer period

  • testo 340 - Flue Gas Analyser - Diesel Kit 

    Order-Nr. 0632 3340

    The testo 340 Flue Gas Analyser is an easy-to-use instrument that can be fitted with up to four different gas sensors. 

    • Direct measurement of 4-gases simultaneously 

    • CO range extension 50,000 PPM 

    • Automatic sensor protection range extension 

    • Smart phone App compatible 

  • testo 330-2 LL

    Order-Nr. 0632 3307 70

    testo 330-2 LL flue gas analyzer with long-life gas sensors and built-in draught and gas zeroing; BLUETOOTH and with H2--compensated CO-sensor; incl. rech. battery and calibration protocol; with graphic display; version 2010

  • testo 350 - Control Unit for exhaust gas analysis systems

    Order-Nr. 0632 3511

    The testo 350 is a rugged, easy-to-use exhaust gas analyzer designed to meet the highest demands when it comes to carrying out precise industrial emission measurements and providing proper data administration. The Control Unit complements the testo 350 Analysis Box (separate product) and makes it easier to control emission measurements.

    • User-friendly application-specific menu guide

    • testo 350 Analysis Box just as easy to use when not positioned at measurement site

    • Internal memory for receiving measurement data from the Analysis Box

    • Large graphic color display, robust, industrial-type housing

  • testo 320 set - low cost gas anlayser kit 

    Order-Nr. 0563 3220 75

    The Testo 320 low cost gas anlayser kit, offering comprehensive combustion system analysis, is designed for the job site and for the contractor who expects more. Use the Testo combustion analyzer for basic testing and tuning of all types of boilers, heaters or furnaces and also to set up and commission more complex multi-stage or modulating heating systems, for accurate combustion efficiency analysis. 

    • CO, O2 and CO2 also measures
      ambient CO, draught and pressure 

    • Fast 30-second startup 

    • Field-replaceable, pre-calibrated
      sensors for accurate system analysis 

    •  

  • testo 350 MARITIME - Exhaust gas analyzer for diesel ship engines

    Order-Nr. 0563 3503

    Testo proudly presents the world’s first portable exhaust gas analyzer for diesel ship engines: the testo 350 MARITIME! The groundbreaking exhaust gas analyzer measures emissions at diesel ship engines in compliance with MARPOL Annex VI and NOx Technical Code 2008.

    • Measures O2, CO, NOx (NO + NO2 separate), SO2 – high precision and long-term stable

    • Certified gas sensors: equal to reference measurement

    • Ready to measure after only two minutes

    • Determination of the fuel sulphur content by means of SO2/CO2 ratio according to MEPC 184 (59)

  • testo 310 - Basic Flue Gas Analyser 

    Order-Nr. 0563 3100

    The Testo 310 basic flue gas analyser sets a new standard in affordable flue gas analysis with its rugged housing, simple design and advanced sensor technology. With five different fuels to select from, it provides the flexibility you need for your applications like checking furnace efficiency, boiler tuning, and water heater checks. 

    • CO, O2 and CO2 also measures ambient CO, draught and pressure 

    •  

    • Bright backlit 2 line display and icons for easy viewing 

    • 2 year warranty 

  • testo 330-2 LL - Professional long-life set for heating engineers

    Order-Nr. 0563 3372 74

    The top equipment for the master heating system engineer: the testo 330-2 LL professional long-life set contains the accessories required for all the important measuring tasks on oil, gas and solid fuel systems. Further accessories mean it can be used for differential temperature measurements and gas leak detection as well.

    • 330-2 LL flue gas analyzer with fresh air valve to protect the CO measuring cell and to extend the CO measuring range to 30,000 ppm

    • 4-year warranty on the probes which users can change themselves, including sensor monitoring with a service life of up to 6 years

    • Single-hose connection: just one hand movement is needed to securely connect all the channels for flue gas measurement (gas paths, draught, temperature probe integrated into the flue gas probe)

    • TÜV-tested according to 1st German Federal Immission Control Ordinance (BImSchV) EN 50379, Parts 1-3

  • testo 310 set with printer

    Order-Nr. 0563 3110

    testo 310 incl. battery and calibration protocol for the measurement of O2, CO, hPa and °C; IR printer (0554 3100); probe 180 mm with cone; case; mains unit incl. cable; silicon hose for pressure measurement; particle filter 5 off; 2 rolls spare thermal paper for printer.

    • Robust and light instrument for daily use

    • 30 seconds sensor zeroing

    • Integrated condensate trap

    • Integrated magnets for easy fixing to burner

  • testo 330-2 LL flue gas set H2

    Order-Nr. 0563 3372 73

    testo 330-2 LL flue gas set H2 for customer service and maintenance technicans, incl. BLUETOOTH, rech. battery and calibration protocol; mains unit 100-240 V for mains operation or charging the rechargeable battery in the instrument; combustion air temperature probe, length 190 mm; hose connection set for separate gas pressure measurement; Testo BLUETOOTH printer with mains unit; basic system case flat; flue gas probe; lenght 300 mm, Ø8 mm, Tmax. 500 °C

  • testo 330-2 LL flue gas set H2 - Professional long-life set for customer service and service engineers

    Order-Nr. 0563 3372 70

    Ready to get started on the most important tasks involved in flue gas analysis on oil, gas and solid fuel systems: the testo 330-2 LL professional long-life set offers the possibility of flue gas measurement, draught, pressure and ambient CO/CO2 measurements, differential temperature measurement and gas leak detection. You get practical accessories in the flue gas analysis set (flue gas probe, hose connection set, Bluetooth printer, etc.).

    • 330-2 LL flue gas analyzer with fresh air valve to protect the CO measuring cell and to extend the CO measuring range to 30,000 ppm 

    • 4-year warranty on the probes which users can change themselves, including sensor monitoring with a service life of up to 6 years

    • Single-hose connection: just one hand movement is needed to securely connect all the channels for flue gas measurement (gas paths, draught, temperature probe integrated into the flue gas probe)

    • TÜV-tested according to 1st German Federal Immission Control Ordinance (BImSchV) EN 50379, Parts 1-3

  • testo 330-1 LL

    Order-Nr. 0632 3306 70

    testo 330-1 LL flue gas analyzer with long-life gas sensors; BLUETOOTH and with H2-compensated CO-sensor, incl. rech. battery and calibration protocol; with graphic display; version 2010

  • testo 330-2 LL flue gas analyzer - Pro flue gas analysis kit

    Order-Nr. 0632 3307

    The intelligent professional analysis tool for all measurements in and around heating systems. The TÜV-tested testo 330-2 LL flue gas analyzer comes with a wide range of user-changeable, longlife sensors that last for up to six years. Saves you from having to buy an extra measuring device – and new sensors.

    • High-quality, longlife (up to six years) O2 and CO sensors; further sensors (i.e. NO sensor) optional

    • 4-year warranty on the flue gas analyzer

    • No need to withdraw the sensor from the flue to zero

    • CO measurements up to 30 000 ppm

  • Set with flue gas analyzer testo 320

    Order-Nr. 0563 3220 77

    Set with flue gas analyzer testo 320 (with H2-compensated CO measurement cell and Bluetooth), modular 300 mm flue gas probe, combustion air probe and mains unit

  • testo 330i - flue gas analyzer

    Order-Nr. 0632 3000 70

    Proven technology meets revolutionary operation. The testo 330i flue gas analyzer was specifically developed to help you to overcome all the obstacles you meet when servicing and commissioning heating systems.  

    • On-site digital creation of reports with the testo 330i App

    • Operation independent of measuring location – readings are always available when you need them

    • testoFix probe holder (optional) – holds the probe in the centre of flow at all times

    • Particularly robust, completely enclosed plastic housing

  • Mini ambient air probe for flue gas analyzers

    Order-Nr. 0600 3692

    Use the mini ambient air probe for direct measurement of ambient air temperature on the flue gas analyzer.

    • Can be plugged directly into the flue gas analyzer 

    • Shock-resistant thanks to plastic basket

    • Measuring range: 0 to +80 °C

  • Modular flue gas probe, 335 mm, Ø 8 mm, Tmax 1000 °C

    Order-Nr. 0600 8764

    The modular flue gas probe with 335 mm long probe shaft including integrated thermocouple up to 1000 °C and quick-change click system (for quick replacement of the probe shaft).

    • Easy probe shaft replacement via quick-change click system

    • Flue gas path and temperature channel can be connected to the instrument via a bayonet lock

    • Integrated thermocouple probe for temperature measurements up to 1000 °C

    • NO2/SO2 special hose (length: 2.2 m)

  • Modular flue gas probe (335 mm, Tmax 1000 °C) with preliminary filter

    Order-Nr. 0600 8766

    The modular flue gas probe with preliminary filter Ø 14 mm, 335 mm long probe shaft, thermocouple up to 1000 °C and quick-change click system (for quick probe shaft replacement).

    • Easy probe shaft replacement via quick-change click system

    • Flue gas path and temperature channel can be connected to the instrument via a bayonet lock

    • Preliminary filter offers protection from dusty flue gases

    • Integrated thermocouple probe for temperature measurements up to 1000 °C

  • Compact basic flue gas probe, 300 mm, Ø 6 mm, Tmax 500 °C

    Order-Nr. 0600 9741

    Compact flue gas probe with 300 mm long probe shaft including particle filter and thermocouple. Bayonet lock ensures quick, easy connection to the measuring instrument.

    • Flue gas path, draught path and temperature probe can be connected via a single probe coupling

    • Easy-to-replace dirt filter

    • Temperatures of up to 500 °C can be measured thanks to the thermocouple probe

    • Includes practical cone for attachment

  • Modular flue gas probe, 180 mm, Ø 8 mm, Tmax 500 °C, TÜV-tested

    Order-Nr. 0600 9760

    TÜV-tested modular flue gas probe with 180 mm long probe shaft including dirt filter and thermocouple. The quick-change click system enables quick, flexible replacement of the probe shaft.

    • Easy probe shaft replacement via quick-change click system

    • Flue gas path and temperature channel can be connected to the instrument via a bayonet lock

    • Integrated dirt filter protects instrument and sensors

    • Integrated thermocouple probe for temperature measurements up to 500 °C

72 Products found
more...