Gas

Although often barely noticeable and harmless if spotted and treated promptly, leaks will only grow into a bigger problem if left undetected. The consequences of a leak can be enormous and costly, ranging from reduced efficiency, higher operational costs and adverse impacts on the natural environment. Most seriously however, human health and safety can be compromised if dangerous substances - such as some gases - are allowed to leak.

 As such, having strategies and tools in place to quickly and accurately detect leaks is imperative. Today it is possible to utilise Testo‘s quality instruments to carry out gas leak detection quickly and reliably, identifying the source of the leak. 
 
Did you know: According to the Centres for Disease Control and Prevention (CDC), red blood cells are able to pick up carbon monoxide more quickly than oxygen. As a result, excessive inhalation of carbon monoxide can result in the gas blocking oxygen from getting into the body.

32 products or recommendations for Gas
  • testo 380 - Particulate matter measurement system

    Order-Nr. 0632 3801

    With the testo 380 particulate matter measurement system, you can carry out uncomplicated particulate matter measurements directly on site. The completely new method of measurement developed by Testo enables the particulate matter to be monitored and limit values to be enforced. The measurement system is your professional tool for solid fuel, oil and gas systems.
    • The system comprises testo 380 particulate matter measuring instrument and testo 330-2 LL flue gas analyzer

    • Complete solution for solid fuel, oil and gas systems 

    • Fully TÜV-tested for limit value levels 1/2 and according to VDI 4206 Sheet 2

    • Particulate matter measurement, simultaneous O2 and CO measurement

    Price on Request
  • testo 330i advanced set - flue gas analyzer set

    Order-Nr. 0563 3000 71

    The testo 330i flue gas analyzer advanced set will enable you to overcome all the challenges that crop up when commissioning and servicing heating systems. The testo 330i advanced set contains the flue gas analyzer, a flue gas probe and a temperature probe, along with practical accessories.
    • Operation independent of measuring location and display of readings via smartphone or tablet and the testo 330i App

    • Paperless documentation and report creation on site with the testo 330i App

    • Reliable attachment of the flue gas probe with the testoFix probe holder

    • Robust, completely enclosed plastic housing for use in harsh environments

    Price on Request
  • testo 380 - Particle counter

    Order-Nr. 0632 3800

    As a chimney sweep, heating engineer or service technician you are required by law to abide to the rules and regulations (like the 1. BlmSchV – Ord. 1 of the Federal Immission Control Ordinance) which apply to your field and profession. You can rely on the testo 380 to help you to carry out your daily tasks because it is certified for use with solid, liquid and gaseous fuels as well as for the threshold values 1 and 2 according to 1. BlmSchV. The easy-to-use particle counter can take you through the preprogrammed measuring programm of the BlmSchV and save you heaps of time and hassle.
    • Carry out parallel fine particle, O2 and CO measurements in real time

    • Ideal for chimney sweeps and system technicians; easy-to-follow, step-by-step guide for carrying out measurements according to 1. BlmSchV

    • Large, graphic colour display, easy to use, low running and maintenance costs

    • Certified for use with solid, liquid and gaseous fuels as well as for the threshold values 1 and 2 according to 1. BlmSchV

    Price on Request
  • testo 316-2 - Multi Gas Leak Detector 

    Order-Nr. 0632 3162

    Speedy and sure gas leak detection. The Testo 316-2 provides you with a quick and reliable means of detecting methane, propane and hydrogen in the ambient air. The gas concentration is displayed in the form of an easy-to-read bar and an alarm is triggered when a threshold is crossed. 
    • Quick reaction time with built-in pump 

    • Flexible gooseneck sensor for checking hard-to-reach pipes and places. 

    • 18-step bar for displaying gas concentration & maximum leakage display 

    • Measures: Methane, Propane & Hydrogen 

    $504.00
    $554.40 incl. GST
  • testo 317-1 - Flue Gas Spillage Detector 

    Order-Nr. 0632 3170

    Gas leaks on heating systems can quickly become a problem, because breathing in poisonous gases leads to health risks or even a risk of death. With the testo 317-1 Flue Gas Spillage Detector, you have a handy measuring instrument which detects escaping heating flue gases quickly and reliably. 
    • Reliable detection of escaping flue gases

    • Flexible probe for inaccessible areas

    • Acoustic and visual alarm

    $156.00
    $171.60 incl. GST
  • testo 316-1 - Methane Gas Detector 

    Order-Nr. 0632 0316

    Quick and reliable  detection of gas leaks in natural gas pipes. The Testo 316-1 natural gas leak detector with two-stage visual alarm system is ideal for carrying out  gas checks. 
    • Flexible measurement probe for inaccessible pipes 

    • Audible & Visual alarm if limit value is exceeded 

    • Quick responsive sensor 

    • Easy to use 

    $337.00
    $370.70 incl. GST
  • testo 330i basic set - flue gas analyzer set

    Order-Nr. 0563 3000 70

    Everything you need to carry out efficient servicing and commissioning of heating systems using the testo 330i flue gas analyzer – in one compact set.
    • Operation independent of measuring location and display of readings via smartphone or tablet and the testo 330i App

    • Paperless documentation and report creation on site with the testo 330i App

    • Reliable attachment of the flue gas probe with the testoFix probe holder

    • Practical accessories, including probes and temperature probe

    Price on Request
  • High-pressure set testo 312-4

    Order-Nr. 0563 1328

    testo 312-4 differential pressure gauge
    testo 312-4 hose set
    balloon pump with release screw
    conical test plug 1/2
    conical test plug 3/4
    testo fast printer
    pressure set for gas pressure measurements on heating systems
    high-pressure plug 3/8 und 3/4
    high-pressue plug 1/2 and 1
    high-pressure probe 1up to 25 bar
    system case
    $2 453.00
    $2 698.30 incl. GST
  • testo 320 - Super efficient flue gas analyzer

    Order-Nr. 0632 3220

    Temperature measurements at radiators; flue gas parameter and pressure measurements at burners; CO measurements in the ambient air: the testo 320 allows you to carry out all measurements in and around heating systems with only one measuring device.
    • Six applications, one device: flue gas, flue draft, pressure, gas leak detection, CO ambient air and pressure difference measurements

    • Integrated flue gas sensors with temperature sensor included; ultra-fine pressure sensors and a wide range of other sensors, ports and probes optional

    • Rugged, high-quality design, high-resolution, multi-color display, self-explanatory menu guide

    • Memory up to 500 measurement protocols

    $1 216.00
    $1 337.60 incl. GST
  • testo 316-EX - Gas leak detector

    Order-Nr. 0632 0336

    The testo 316-EX gas leak detector helps you to detect gas leaks and ATEX protection means it can also be used in potentially explosive atmospheres. Gas verification and gas leak location can be carried out on gas pipes and installations both indoors and outdoors.
    • ATEX approval (94/9/EC)

    • ppm and vol.% display

    • Flexible probe for inaccessible areas

    • 3 different types of gas can be detected: methane, propane and hydrogen

    $858.00
    $943.80 incl. GST
  • testo gas detector - Gas detector

    Order-Nr. 0632 0323

    Testo's robust gas detector is a multi-range instrument for detecting methane, propane and hydrogen gases. It has a display which enables direct reading of the ppm-values.
    • Gas detector for methane, propane and hydrogen gases

    • Flexible probe extension for inaccessible areas

    • Acoustic signals on approaching the lower explosive limit

    • With alarm function: continuous tone and indication on the display on reaching the explosive limit

    $1 590.00
    $1 749.00 incl. GST
  • testo 317-2 - Methane & Propane Detector 

    Order-Nr. 0632 3172

    Do you want to test quickly and efficiently whether there is a gas leak on gas pipe connections? Let the reliable testo 317-2 Methane & Propane Detector support you in your task. 
    • Display of gas concentration via bar display

    • Self-test of sensor after switching on

    • Pitch of alarm rises along with gas concentration

    • Battery monitoring with optical display

    $220.00
    $242.00 incl. GST
  • testo 312-4 - Differential pressure measuring instrument

    Order-Nr. 0632 0327

    You can carry out all the necessary tests on gas heating systems as well as water and gas pipes with the testo 312-4 electronic differential pressure measuring instrument. Preset measuring processes, for example for load and tightness tests as well as serviceability testing on gas pipes, provide you with ideal support for your work.
    • Tightness testing and load testing on gas pipes

    • Serviceability testing with air by pressure drop on gas pipes

    • Pressure testing on drinking water and waste water pipes using air

    • Automatic recording of measuring values over several hours

    $842.00
    $926.20 incl. GST
  • Basic set testo 312-4

    Order-Nr. 0563 1327

    testo 312-4 differential pressure gauge
    testo 312-4 hose set
    balloon pump with release screw
    conical test plug 1/2
    conical test plug 3/4
    testo fast printer
    pressure set for gas pressure measurements in heating systems
    system case
    $1 852.00
    $2 037.20 incl. GST
  • testo 315-3 - Ambient CO and CO2 Detector 

    Order-Nr. 0632 3153

    The high-quality testo 315-3 is an easy-to-use, ruggedly designed CO and CO2 meter that enables you to carry out quick and reliable ambient measurements according to DIN EN 50543 standard.
    • Measures CO & CO2 

    • Temperature & Humidity Measurements 

    • Optional Bluetooth Interface 

    • Optical & Audible Alarms 

    $1 314.00
    $1 445.40 incl. GST
  • testo 315-3 with Bluetooth - CO and CO2 meter for ambient measurements

    Order-Nr. 0632 3154

    The high-quality testo 315-3 is an easy-to-use, ruggedly designed CO and CO2 meter that enables you to carry out quick and reliable ambient measurements according to DIN EN 50543 standard.
    • High-precision electrochemical CO sensor, shock resistant infrared CO2 sensor

    • Visual and audible alarm when thresholds are breached – adjustable thresholds

    • Rugged design

    • TÜV certified according to DIN EN 50543 standard

    $1 447.00
    $1 591.70 incl. GST
  • testo 317-3 - Ambient CO Meter 

    Order-Nr. 0632 3173

    Carbon monoxide is a silent killer. The compact Testo 317-3 CO meter is designed to provide you with a quick and reliable means of testing ambient air for carbon monoxide. 
    • Instant Start up: no zeroing phase 

    • 3-year warranty on CO sensor 

    • Alarm with adjustable thresholds 

    • Carry case with belt clip and handstrap 

    $259.00
    $284.90 incl. GST
  • testo 324 - Pressure/gas leak detector

    Order-Nr. 0632 3240

    Professional pressure/leak detector for installation, maintenance and service of gas and water pipes. Specially designed to carry out reliable leak tightness checks, load tests, serviceability tests, temperature measurements in accordance with existing rules and regulations.
    • Easy to set up, easy to use due to legally compliant measuring menus (i.e. according to TRGI 2008)

    • Extremely accurate and DVGW-compliant measuring results

    • Leak tightness checks of gas pipes according to TRGI 2008 and liquid gas pipes according to TRF 2012

    • Easy to use due to automatic pressure build-up; quick and easy data storage

    Price on Request
  • testo 300 Domestic Kit - Flue gas analyzer (O2, CO up to 4,000 ppm)

    Order-Nr. 0564 3002 70

    With this kit, you will be equipped for the most important measurements involving heating systems: the TÜV-tested testo 300 flue gas analyzer is supplied with O2 and CO sensor up to 4,000 ppm, basic flue gas probe, instrument case and practical accessories.
    • Fast and easy to operate: intuitive measurement menus and fast-response Smart-Touch display

    • Including O2 and CO sensor up to 4,000 ppm

    • Large 5-inch HD display – see all the system's measuring values at a glance

    • In the kit: testo 300 flue gas analyzer, including O2 and CO sensor up to 4,000 ppm, mains unit, basic flue gas probe, spare dirt filters, EasyHeat software, instrument case

  • testo 300 Basic Kit - Flue gas analyzer (O2, CO up to 4,000 ppm)

    Order-Nr. 530564 3070

    With this kit, you will be equipped for the most important measurements involving heating systems: the TÜV-tested testo 300 flue gas analyzer is supplied with O2 and CO sensor up to 4,000 ppm, basic flue gas probe, instrument case and practical accessories.
    • Fast and easy to operate: intuitive measurement menus and fast-response Smart-Touch display

    • Including O2 and CO sensor up to 4,000 ppm

    • Large 5-inch HD display – see all the system's measuring values at a glance

    • In the kit: testo 300 flue gas analyzer, including O2 and CO sensor up to 4,000 ppm, mains unit, basic flue gas probe, spare dirt filters, EasyHeat software, instrument case

32 Products found
Show More