Nano particles

4 Products found
  • testo DiSCmini - handheld measuring instrument for nanoparticle counting

    Order-Nr. 133

    Use the testo DiSCmini to monitor personal exposure to ultrafine particles (UFP) in work areas or to toxic pollutants such as diesel soot. This will enable you to minimize any risks to health.

    • Simultaneous measurement and display of particle number concentration, average particle diameter and LDSA with a time resolution of 1 second

    • No need for any working fluid

    • Vibration-resistant and can be operated in any position

    • Battery operation and Mascot charger for long-term measurements

  • testo NanoMet3 - portable nanoparticle counter for Real Driving Emissions (RDE)

    Order-Nr. 444

    The innovative testo NanoMet3 PN-PEMS (particle number, portable emission measurement system) enables you to measure vehicle Real Driving Emissions – RDE.
     

    • One-button operation

    • Gas conditioning: integrated PMP thermodilution

    • Measurement method for gasoline and diesel vehicles without any additional instrument settings

    • No need for any operating resources

  • testo ViPR - volatile particle remover for sampling and raw gas conditioning according to UNECE R83 and R49

    Order-Nr. 1122B

    The testo ViPR volatile particle remover is a gas conditioning system for sampling, dilution and conditioning of raw gas for particle determination. It is compliant with the method according to PMP (Particle Measurement Programme) and is characterized by its award-winning technology.
     

    • UNECE R83 and R49 compliant

    • Gas conditioning for particle number measurement for vehicle type approval

    • Primary diluter for direct connection to exhaust pipe or CVS dilution tunnel

    • Einfache Bedienung über PC

  • testo REXS - High mass soot generator

    Order-Nr. 366

    Reproducible EXhaust Simulator generates nano-sized soot particles which are very similar to diesel soot, and is fully automated. It is impressive thanks to its high mass output, ease of use and attractive cost-saving potential.

    • Combustion soot particles with similar mobility distribution to diesel emissions

    • Stable, reproducible particle size distribution with less than 5% deviation

    • 6 possible operation points with mode diameter between 30 nm and 120 nm

    • Stable operation even when there are changes in the absolute pressure due to increasing backpressure in loaded filters

4 Products found