Flue gas analysis

11 products or recommendations for Flue gas analysis
  • testo 310 set with printer

    Order-Nr. 0563 3110

    testo 310 incl. battery and calibration protocol for the measurement of O2, CO, hPa and °C; IR printer (0554 3100); probe 180 mm with cone; case; mains unit incl. cable; silicon hose for pressure measurement; particle filter 5 off; 2 rolls spare thermal paper for printer.

    • Robust and light instrument for daily use

    • 30 seconds sensor zeroing

    • Integrated condensate trap

    • Integrated magnets for easy fixing to burner

  • testo 310 - Basic Flue Gas Analyser 

    Order-Nr. 0563 3100

    The Testo 310 basic flue gas analyser sets a new standard in affordable flue gas analysis with its rugged housing, simple design and advanced sensor technology. With five different fuels to select from, it provides the flexibility you need for your applications like checking furnace efficiency, boiler tuning, and water heater checks. 

    • CO, O2 and CO2 also measures ambient CO, draught and pressure 

    •  

    • Bright backlit 2 line display and icons for easy viewing 

    • 2 year warranty 

  • testo 330-2 LL - Professional long-life set for heating engineers

    Order-Nr. 0563 3372 74

    The top equipment for the master heating system engineer: the testo 330-2 LL professional long-life set contains the accessories required for all the important measuring tasks on oil, gas and solid fuel systems. Further accessories mean it can be used for differential temperature measurements and gas leak detection as well.

    • 330-2 LL flue gas analyzer with fresh air valve to protect the CO measuring cell and to extend the CO measuring range to 30,000 ppm

    • 4-year warranty on the probes which users can change themselves, including sensor monitoring with a service life of up to 6 years

    • Single-hose connection: just one hand movement is needed to securely connect all the channels for flue gas measurement (gas paths, draught, temperature probe integrated into the flue gas probe)

    • TÜV-tested according to 1st German Federal Immission Control Ordinance (BImSchV) EN 50379, Parts 1-3

  • testo 330-2 LL flue gas set H2

    Order-Nr. 0563 3372 73

    testo 330-2 LL flue gas set H2 for customer service and maintenance technicans, incl. BLUETOOTH, rech. battery and calibration protocol; mains unit 100-240 V for mains operation or charging the rechargeable battery in the instrument; combustion air temperature probe, length 190 mm; hose connection set for separate gas pressure measurement; Testo BLUETOOTH printer with mains unit; basic system case flat; flue gas probe; lenght 300 mm, Ø8 mm, Tmax. 500 °C

  • testo 330-2 LL flue gas set H2 - Professional long-life set for customer service and service engineers

    Order-Nr. 0563 3372 70

    Ready to get started on the most important tasks involved in flue gas analysis on oil, gas and solid fuel systems: the testo 330-2 LL professional long-life set offers the possibility of flue gas measurement, draught, pressure and ambient CO/CO2 measurements, differential temperature measurement and gas leak detection. You get practical accessories in the flue gas analysis set (flue gas probe, hose connection set, Bluetooth printer, etc.).

    • 330-2 LL flue gas analyzer with fresh air valve to protect the CO measuring cell and to extend the CO measuring range to 30,000 ppm 

    • 4-year warranty on the probes which users can change themselves, including sensor monitoring with a service life of up to 6 years

    • Single-hose connection: just one hand movement is needed to securely connect all the channels for flue gas measurement (gas paths, draught, temperature probe integrated into the flue gas probe)

    • TÜV-tested according to 1st German Federal Immission Control Ordinance (BImSchV) EN 50379, Parts 1-3

  • Set with flue gas analyzer testo 320

    Order-Nr. 0563 3220 77

    Set with flue gas analyzer testo 320 (with H2-compensated CO measurement cell and Bluetooth), modular 300 mm flue gas probe, combustion air probe and mains unit

  • testo 320 set - low cost gas anlayser kit 

    Order-Nr. 0563 3220 75

    The Testo 320 low cost gas anlayser kit, offering comprehensive combustion system analysis, is designed for the job site and for the contractor who expects more. Use the Testo combustion analyzer for basic testing and tuning of all types of boilers, heaters or furnaces and also to set up and commission more complex multi-stage or modulating heating systems, for accurate combustion efficiency analysis. 

    • CO, O2 and CO2 also measures
      ambient CO, draught and pressure 

    • Fast 30-second startup 

    • Field-replaceable, pre-calibrated
      sensors for accurate system analysis 

    •  

  • testo 330-2 LL

    Order-Nr. 0632 3307 70

    testo 330-2 LL flue gas analyzer with long-life gas sensors and built-in draught and gas zeroing; BLUETOOTH and with H2--compensated CO-sensor; incl. rech. battery and calibration protocol; with graphic display; version 2010

  • testo 330-1 LL

    Order-Nr. 0632 3306 70

    testo 330-1 LL flue gas analyzer with long-life gas sensors; BLUETOOTH and with H2-compensated CO-sensor, incl. rech. battery and calibration protocol; with graphic display; version 2010

  • testo 330-2 LL flue gas analyzer - Pro flue gas analysis kit

    Order-Nr. 0632 3307

    The intelligent professional analysis tool for all measurements in and around heating systems. The TÜV-tested testo 330-2 LL flue gas analyzer comes with a wide range of user-changeable, longlife sensors that last for up to six years. Saves you from having to buy an extra measuring device – and new sensors.

    • High-quality, longlife (up to six years) O2 and CO sensors; further sensors (i.e. NO sensor) optional

    • 4-year warranty on the flue gas analyzer

    • No need to withdraw the sensor from the flue to zero

    • CO measurements up to 30 000 ppm

  • testo 330i - flue gas analyzer

    Order-Nr. 0632 3000 70

    Proven technology meets revolutionary operation. The testo 330i flue gas analyzer was specifically developed to help you to overcome all the obstacles you meet when servicing and commissioning heating systems.  

    • On-site digital creation of reports with the testo 330i App

    • Operation independent of measuring location – readings are always available when you need them

    • testoFix probe holder (optional) – holds the probe in the centre of flow at all times

    • Particularly robust, completely enclosed plastic housing

11 Products found