Heating system maintenance - Efficiency measurement

49 products or recommendations for Heating system maintenance - Efficiency measurement
  • testo 310 set with printer

    Order-Nr. 0563 3110

    testo 310 incl. battery and calibration protocol for the measurement of O2, CO, hPa and °C; IR printer (0554 3100); probe 180 mm with cone; case; mains unit incl. cable; silicon hose for pressure measurement; particle filter 5 off; 2 rolls spare thermal paper for printer.

    • Robust and light instrument for daily use

    • 30 seconds sensor zeroing

    • Integrated condensate trap

    • Integrated magnets for easy fixing to burner

  • testo 310 - Basic Flue Gas Analyser 

    Order-Nr. 0563 3100

    The Testo 310 basic flue gas analyser sets a new standard in affordable flue gas analysis with its rugged housing, simple design and advanced sensor technology. With five different fuels to select from, it provides the flexibility you need for your applications like checking furnace efficiency, boiler tuning, and water heater checks. 

    • CO, O2 and CO2 also measures ambient CO, draught and pressure 

    •  

    • Bright backlit 2 line display and icons for easy viewing 

    • 2 year warranty 

  • Modular flue gas probe, 300 mm, Ø 8 mm, Tmax 500 °C, TÜV-tested

    Order-Nr. 0600 9761

    TÜV-tested modular flue gas probe with 300 mm long probe shaft including dirt filter and thermocouple. The quick-change click system enables quick, flexible replacement of the probe shaft.

    • Easy probe shaft replacement via quick-change click system

    • Flue gas path and temperature channel can be connected to the instrument via a bayonet lock

    • Integrated dirt filter protects instrument and sensors

    • Integrated thermocouple probe for temperature measurements up to 500 °C

  • Combustion air temperature probe

    Order-Nr. 0600 9787

    The probe is used for the specific measurement of combustion air temperature within the context of flue gas or particulate matter measurements.

    • Flexible positioning (immersion depth 190 mm, cable length 2.2 m) 

    • Cone for attachment included

    • Measuring range: 0 to +100 °C

  • Dual wall clearance probe for O2 supply air measurement

    Order-Nr. 0632 1260

    The dual wall clearance probe (in combination with the appropriate measuring instrument) enables easy and reliable measurement of O2 supply air in the dual wall clearance. In addition, it can also be used to check the dual wall clearance for leaks and blockages.

    • Detection of leaks and blockages in the dual wall clearance

    • Curved probe for easy insertion into the dual wall clearance

  • Mini ambient air probe for flue gas analyzers

    Order-Nr. 0600 3692

    Use the mini ambient air probe for direct measurement of ambient air temperature on the flue gas analyzer.

    • Can be plugged directly into the flue gas analyzer 

    • Shock-resistant thanks to plastic basket

    • Measuring range: 0 to +80 °C

  • Modular flue gas probe, 180 mm, Ø 8 mm, Tmax 500 °C, TÜV-tested

    Order-Nr. 0600 9760

    TÜV-tested modular flue gas probe with 180 mm long probe shaft including dirt filter and thermocouple. The quick-change click system enables quick, flexible replacement of the probe shaft.

    • Easy probe shaft replacement via quick-change click system

    • Flue gas path and temperature channel can be connected to the instrument via a bayonet lock

    • Integrated dirt filter protects instrument and sensors

    • Integrated thermocouple probe for temperature measurements up to 500 °C

  • Compact basic flue gas probe, 300 mm, Ø 6 mm, Tmax 500 °C

    Order-Nr. 0600 9741

    Compact flue gas probe with 300 mm long probe shaft including particle filter and thermocouple. Bayonet lock ensures quick, easy connection to the measuring instrument.

    • Flue gas path, draught path and temperature probe can be connected via a single probe coupling

    • Easy-to-replace dirt filter

    • Temperatures of up to 500 °C can be measured thanks to the thermocouple probe

    • Includes practical cone for attachment

  • Compact basic flue gas probe, 180 mm, Ø 6 mm, Tmax 500 °C

    Order-Nr. 0600 9740

    Compact basic flue gas probe with 180 mm long probe shaft, integrated thermocouple and dirt filter.

    • Flue gas path and temperature channel can be connected to the instrument via a bayonet lock

    • Integrated dirt filter protects instrument and sensors

    • Integrated thermocouple probe for temperature measurements up to 500 °C

    • Includes practical cone for attachment

  • High-pressure probe - for pressure tests up to 25 bar

    Order-Nr. 0638 1748

    The high-pressure probe (with the appropriate measuring instrument) is ideally suited for carrying out pressure tests up to 25 bar and pressure tests on fluids.

    • Pressure tests up to 25 bar 

    • Pressure tests on fluids

    • High-pressure tests on water pipes, tests on waste water pipes according to DIN EN 1610

    • Can be attached to testo 312-4 and testo 324

  • Testo quick printer

    Order-Nr. 0554 0549

    Testo fast printer IrDA with wireless infrared interface; 1 roll thermal paper; 4 AA batteries

    • Evaluate restoration measures quickly and without error.

    • Easy attachment of probes even at difficult-to-access places

    • Proof of services thanks to report creation

49 Products found
Show More