Leakage test

Safety is one of the key reasons for using Testo refrigerant leak detectors to assess and maintain refrigeration systems. Many of these installations rely on chemicals such as ammonia or carbon dioxide that can be dangerous in specific situations. One of the main dangers that the refrigeration industry needs to keep on top of is leaks. Chemicals such as ammonia may not be lethal in small doses, but if it’s allowed to build up or react with other compounds the results can be deadly. Testo refrigerant leak detectors allow you to identify these issues before they can escalate, and enable you to perform quick and easy maintenance to ensure these problems never befall your business. Did you know: There are multiple costs associated with making mistakes in the refrigeration and HVAC industry. Not only is there the risk of fines, but people can also become sick - or worse - when refrigeration gauges aren't used effectively. In the US an ammonia leak occurred due to a major refrigeration equipment malfunction which released around 32,000 pounds of ammonia into the air. While this is an extreme case of refrigeration equipment failure, it highlights the value of regular maintenance checks. As a result of the leak's scale and its preventable nature, the company was fined US$ 3,000,000.

51 products or recommendations for Leakage test
  • testo fast printer IRDA

    Order-Nr. 0554 0549

    Use the printer with IRDA and infrared interface for fast and reliable documentation of readings.
    • Documentation of readings in black and white

    • Fast data transfer within 2 seconds

    • Out-off function

    $377.00
    $414.70 incl. GST
  • Spare thermal paper

    Order-Nr. 0554 0568

    Spare thermal paper, permanent ink
    • Permanent thermal paper

    • 6 rolls

    $47.00
    $51.70 incl. GST
  • International mains unit

    Order-Nr. 0554 1096

    Use the mains unit for mains operation of your measuring instrument or for battery charging in the instrument. It is suitable for international use.
    • For mains operation or charging batteries in the instrument

    • 100-240 V AC / 6.3 V DC

    $95.00
    $104.50 incl. GST
  • Connection hose, silicone

    Order-Nr. 0554 0440

    Use the connection hose to connect suitable Pitot tubes and pressure probes with one another. The hose is made of silicone and has a max. load capacity of up to 700 hPa (mbar).
    • For the connection of Pitot tube and pressure probe

    • Length of 5 m

    $74.00
    $81.40 incl. GST
  • Bluetooth®/IRDA printer

    Order-Nr. 0554 0620

    Using the printer you can print out graphs and measurement data from compatible Testo measuring instruments or Testo Apps.
    • Bluetooth & IRDA interface in one printer

    • Print out of international characters e.g. asian characters

    • Rechargeable battery

    • Coloured LEDs to display status of printer

    $568.00
    $624.80 incl. GST
  • Instrument case (height: 130 mm) - for instrument, probes and accessories

    Order-Nr. 0516 3300

    Instrument case (height: 130 mm) for instrument, probes and accessories
    $210.00
    $231.00 incl. GST
  • Pressure set for testing gas line

    Order-Nr. 0554 1213

    Pressure set for testing gas line
    $201.00
    $221.10 incl. GST
  • Upgrade NO-sensor; 0 to 3000 ppm; resolution 1 ppm

    Order-Nr. 0554 2151

    Upgrade NO-sensor; 0 to 3000 ppm; resolution 1 ppm
    $1 557.00
    $1 712.70 incl. GST
  • Flexible probe shaft for attachment to modular flue gas probes

    Order-Nr. 0554 9770

    Our flexible probe shaft helps you to carry out flue gas measurements even on difficult-to-access measurement apertures. Since the probe shaft is made of very flexible plastic, you can easily bend it, allowing it to be inserted into exhaust flues which are obstructed (e.g. by sloping ceilings).
    • For flue gas measurements on heating system burners

    • Extremely flexible plastic probe shaft

    • Used for measurements at difficult-to-access measurement sites

    • Attachable to modular flue gas probes

    $494.00
    $543.40 incl. GST
  • USB mains unit incl. cable

    Order-Nr. 0554 1105

    USB mains unit incl. cable
    $69.00
    $75.90 incl. GST
  • Spare dirt filters (10 off) - for condensate trap in the gas sampling hose and measuring range extension

    Order-Nr. 0554 3371

    The spare dirt filter enables you to reliably protect the condensate trap in the gas sampling hose and measuring range extension (gas dilution) against dirt.
    • Reliable protection against dirt particles

    • 10 off

    $91.00
    $100.10 incl. GST
  • Hose extension - Probe-instrument extension hose (length 2.8 m)

    Order-Nr. 0554 1202

    For user-friendly measurements: The 2.8 m long extension hose can be connected between the measuring instrument and the appropriate probe.
    • Hose extension with a length of 2.8 m

    • Can be connected between measuring instrument and probe

    $461.00
    $507.10 incl. GST
  • Instrument case with double base (height: 180 mm) - for instrument, probes and accessories

    Order-Nr. 0516 3301

    Instrument case with double base (height: 180 mm) for instrument, probes and accessories
    $309.00
    $339.90 incl. GST
  • Leather case to protect measuring instrument, including belt...

    Order-Nr. 0516 8302

    Leather case to protect measuring instrument, including belt holder
    $22.00
    $24.20 incl. GST
  • Battery-charging station, desktop charging station

    Order-Nr. 0554 1103

    Optimize the charge time for your instrument's battery with this battery-charging station. Simply charge your instrument's battery in the charging station while another battery is in use.
    • To optimize the charge time

    • For external charging of your instrument's battery

    • Stable positioning on the desk

    $70.00
    $77.00 incl. GST
  • Single-pipe counter cap, connects test fittings to pipe

    Order-Nr. 0554 3156

    Single-pipe counter cap, connects test fittings to pipe
    $115.00
    $126.50 incl. GST
  • Bluetooth®/IRDA printer

    Order-Nr. 0554 0621

    Using the printer you can print out graphs and measurement data from compatible Testo measuring instruments or Testo Apps.
    • Bluetooth® & IrDA interface in one printer

    • Printout of graphs and measurement data

    • Coloured LEDs show the status of the printer

    • Data transfer takes just 2 seconds

    $528.00
    $580.80 incl. GST
  • Test pump to produce test pressure

    Order-Nr. 0554 3157

    Test pump to produce test pressure
    $105.00
    $115.50 incl. GST
  • Probe shaft; length 300 mm; Ø 8 mm; Tmax. 500 °C

    Order-Nr. 0554 9761

    Probe shaft; length 300 mm; Ø 8 mm; Tmax. 500 °C
    $317.00
    $348.70 incl. GST
  • Probe shaft; length 180 mm; 8 mm; Tmax. 500 °C

    Order-Nr. 0554 9760

    Probe shaft; length 180 mm; 8 mm; Tmax. 500 °C
    $303.00
    $333.30 incl. GST
51 Products found
Show More