Parameters

25 products or recommendations for Parameters
  • testo 175 T3 - Dual Thermocouple Logger 

    Order-Nr. 0572 1753

    With its two connections for external thermocouple probes, the testo 175 T3 Dual Thermocouple Logger  is a good idea when you would like to record your temperatures at two locations in parallel: for example when measuring the flow and return temperature on radiators. The readings are securely saved in the temperature logger and are available for later measurement data analysis and documentation. 
    • Dual measurements (1 internal, 2 Thermocoule probes)
      for ambient and product temperature monitoring 

    • Large memory, 1 Million Readings 

    • Data transfer possible using the USB port
      or SD card (Optional) 

    • IP65 proection class 

    $350.00
    incl. GST  $385.00
  • testo 190-T1 - Temperature CFR data logger with short, rigid probe

    Order-Nr. 0572 1901

    Use the testo 190-T1 CFR temperature data logger, which is designed for the pharmaceutical industry, for the efficient temperature monitoring of sterilization processes. The testo 190-T1 CFR data logger has a short, rigid temperature probe, is particularly small and can therefore be used to monitor temperatures even in confined spaces.
    • High-precision temperature monitoring with short, rigid probe

    • Durable, robust, reliably tight, even after changing the battery

    • Changing the battery takes just seconds, saving time and increasing efficiency

    • Simultaneous configuration and readout of several CFR data loggers via the multifunction case

    Price on Request
  • testo 190-T2 - CFR temperature data logger with long, rigid probe

    Order-Nr. 0572 1902

    Designed for the pharmaceutical industry, the testo 190-T2 CFR temperature data logger is ideally suited for efficient temperature monitoring of sterilization processes. The testo 190-T2 CFR data logger is fitted with a long, rigid temperature probe. This means it can also be used for measurement in bottles or cans.
    • High-precision temperature monitoring with long, rigid probe

    • Durable, robust, reliably tight, even after changing the battery

    • Changing the battery takes just seconds, saving time and increasing efficiency

    • Simultaneous configuration and readout of several data loggers via the multifunction case

    Price on Request
  • testo 190-T3 - CFR temperature data logger with long, flexible probe

    Order-Nr. 0572 1903

    Ideal for temperature monitoring in sterilization applications, in liquids or on surfaces, for example on plates in freeze-drying systems. Designed for the pharmaceutical industry, the testo 190-T3 CFR temperature data logger for sterilization and freeze-drying processes has a long, flexible probe which also enables you to measure in corners.
    • Precise temperature measurement in autoclaves, containers, liquids and on surfaces using a long, flexible probe

    • Durable, robust, reliably tight, even after changing the battery

    • Changing the battery takes just seconds, saving time and increasing efficiency

    • Simultaneous configuration and readout of several CFR data loggers via the multifunction case

    Price on Request
  • testo 190-T4 - CFR temperature data logger with two long, flexible probes

    Order-Nr. 0572 1904

    Designed for the pharmaceutical industry, the testo 190-T4 CFR temperature data logger for sterilization and freeze-drying processes has two long, flexible probes which also enable you to measure in corners. It is particularly suitable for monitoring the temperature in autoclaves, containers, liquids or on surfaces, for example on plates in freeze-drying systems.
    • Two long, flexible probes for precise temperature measurement in sterilization and freeze-drying applications and for determining the acclimatization time between core and outer temperature

    • Durable, robust, reliably tight, even after changing the battery

    • Changing the battery takes just seconds, saving time and increasing efficiency

    • Simultaneous configuration and readout of several CFR data loggers via the multifunction case

    Price on Request
  • testo 175 T2 - Two Channel Temperature Logger 

    Order-Nr. 0572 1752

    The testo 175 T2 - Two Channel Temperature Logger is ideally suited if you want to use one instrument to monitor air temperature and to record additional temperature values (e.g. core temperature) on a second channel at the same time. In particular, it is the perfect solution for parallel temperature control of the ambient conditions and the goods themselves when storing food.
    • Dual measurements (1 internal, 1 external)
      for ambient and product temperature monitoring 

    • Large memory, 1 Million Readings 

    • Data transfer possible using the USB port
      or SD card (Optional) 

    • IP65 proection class 

    $287.00
    incl. GST  $315.70
  • testo 735-2 - Scientific Thermometer 

    Order-Nr. 0563 7352

    Calibration of static temperature sensors, temperature measurements in the cosmetics industry, chemical laboratories, the field of cooling and refrigeration technology, the food industry: the testo 735-2 Scientific Thermometer can master virtually any application thanks to a wide range of optionally available sensors, a super-size memory and wireless data transfer. 
    • 3 measurements can be carried out
      simultaneously 

    • 99 sites can be stored in the instrument 

    • Memory for up to 10,000 readings 

    • Displays, saves and prints Delta T,
      min, max and mean values 

    $781.00
    incl. GST  $859.10
  • testo 720 - Temperature meter

    Order-Nr. 0560 7207

    The testo 720 digital temperature meter is designed specifically for the special needs of laboratories and the industry and comes with a wide range of optional connectable sensors for surface temperature, air temperature and immersion measurements.
    • Port for one RTD or NTC sensor

    • Wide range of optional sensors for individual requirements

    • User-defined thresholds, audible alarm when thresholds are exceeded

    • Optional accessories for individual adaptation, i.e. protection against aggressive media for use in laboratories

    $300.00
    incl. GST  $330.00
  • testo 735-1 - Temperature measuring instrument (3-channel)

    Order-Nr. 0560 7351

    If you need a measuring instrument for accurate temperature measurement or you would like to measure the temperature in several locations simultaneously, the testo 735-1 is the ideal equipment for you. The wide selection of optional probes enables flexible use of the temperature measuring instrument, for example to calibrate stationary temperature probes, in the electronics and food industries or in laboratories.
    • With optional probes that measure core temperature, surface temperature and air temperature

    • Up to three probes can be attached and three additional temperature probes can also be connected to the temperature measuring instrument by radio

    • Accurate measurement up to 0.05 °C with Pt100 temperature probe (optional)

    • Display of min., max. and mean values and calculation of the differential temperature (delta T)

    $584.00
    incl. GST  $642.40
  • testo 176 P1 - Pressure Data Logger 

    Order-Nr. 0572 1767

    The Testo 176P1 is a 5 channel data logger. It has an internal absolute pressure sensor and connection possibilities for two external temperature/humidity probes. 
    • 3 Parameters in 1 Temperature, Humidity & Pressure 

    • Large memory, 2 Million Readings 

    • Data transfer possible using the USB port
      or SD card (Optional) 

    • Simple and large easy to read display 

    $982.00
    incl. GST  $1 080.20
  • Temperature probe with penetration tip (NTC)

    Order-Nr. 0572 1001

    Temperature probe with penetration tip for measurements in pastes and semi-solid materials, liquids and also in air.
    • NTC probe with exceptionally flat cable (2 m long), which can be pushed through narrow openings, e.g. through slits in doors

    • Temperature measurement in pastes and semi-solid media and also in liquids and air

    • Measuring range: -25 to +80 °C

    $168.00
    incl. GST  $184.80
  • Penetration probe Pt100 with ribbon cable, cable length 2 m,...

    Order-Nr. 0572 7001

    Penetration probe Pt100 with ribbon cable, cable length 2 m, IP 54
    $230.00
    incl. GST  $253.00
  • Spare pH probe

    Order-Nr. 0650 2051

    With the spare pH probe, it is really easy to replace the measuring tip of your pH/temperature measuring instrument yourself.
    • Spare pH probe for pH/temperature measuring instrument

    • Easy change of measuring tip

    $246.00
    incl. GST  $270.60
  • Temperature probe with penetration tip (TC Type K)

    Order-Nr. 0572 9001

    Temperature probe with penetration tip for measurements in pastes and semi-solid media and also in liquids and air
    • TC Type K temperature probe with exceptionally flat cable, which can be pushed through narrow openings, e.g. through slits in doors

    • Temperature measurement in pastes and semi-solid media and also in liquids and air

    • Measuring range: -40 ... +220 °C

    Price on Request
  • ComSoft Professional - software

    Order-Nr. 0554 1704

    The ComSoft Professional software means you get software for programming and readout of Testo data loggers and for archiving data. It offers analysis and display possibilities over and above the basic functions.
    • Professional software for programming and readout of Testo data loggers and for archiving data

    • Graphic and tabular display of all measurement parameters

    • Effortless creation and management of reports

    • Intuitive user interface for efficient work

    $509.00
    incl. GST  $559.90
  • ComSoft 21 CFR Part 11 - software

    Order-Nr. 0554 1705

    The ComSoft 21 CFR Part 11 software means you get validatable software for programming and readout of Testo data loggers and for archiving data. It fulfils all the FDA's 21 CFR Part 11 requirements.
    • Intuitive and validatable software for the pharmaceutical industry

    • Graphic and tabular display of all measurement parameters

    • Effortless creation and management of reports

    • Digital signature and audit trail for maximum security and safety

    $2 274.00
    incl. GST  $2 501.40
  • Battery, 3.6 V/1.9 Ah 1AA

    Order-Nr. 0515 0177

    Battery, 3.6 V/1.9 Ah 1AA
    • Lithium mignon battery (AA)

    $55.00
    incl. GST  $55.00
  • Battery, 3.6 V/0.8 Ah 1/2 AA

    Order-Nr. 0515 0175

    Battery, 3.6 V/0.8 Ah 1/2 AA
    $32.00
    incl. GST  $32.00
  • USB interface

    Order-Nr. 0554 1768

    USB interface, for testo 175/177 incl. desk-top holders, PC conn. cable
    $162.00
    incl. GST  $178.20
  • Wall bracket for data loggers

    Order-Nr. 0554 1702

    Use the wall bracket to fix your data logger securely and firmly to walls.
    • For reliably securing appropriate data loggers to the wall

    • Particularly secure thanks to the lock included in delivery

    $32.00
    incl. GST  $35.20
25 Products found
Show More