Parameters

41 products or recommendations for Parameters
  • Spare pH probe

    Order-Nr. 0650 2051

    With the spare pH probe, it is really easy to replace the measuring tip of your pH/temperature measuring instrument yourself.
    • Spare pH probe for pH/temperature measuring instrument

    • Easy change of measuring tip

    $246.00
    incl. GST $270.60
  • Spare pH probe pH2 for pH/temperature measuring instrument

    Order-Nr. 0650 2062

    With the spare pH probe pH2, it is really easy to replace the measuring tip of your pH/temperature measuring instrument yourself.
    • Spare pH probe pH2 for pH/temperature measuring instrument

    • Easy change of measuring tip

    $234.00
    incl. GST $257.40
  • Spare pH probe pH1 for pH/temperature measuring instrument

    Order-Nr. 0650 2061

    With the spare pH probe pH1, it is really easy to replace the measuring tip of your pH/temperature measuring instrument yourself.
    • Spare pH probe pH1 for pH/temperature measuring instrument

    • Easy change of measuring tip

    $113.00
    incl. GST $124.30
  • Connection hose, silicone

    Order-Nr. 0554 0440

    Use the connection hose to connect suitable Pitot tubes and pressure probes with one another. The hose is made of silicone and has a max. load capacity of up to 700 hPa (mbar).
    • For the connection of Pitot tube and pressure probe

    • Length of 5 m

    $77.00
    incl. GST $84.70
  • Battery, 3.6 V/1.9 Ah 1AA

    Order-Nr. 0515 0177

    Battery, 3.6 V/1.9 Ah 1AA
    • Lithium mignon battery (AA)

    $55.00
    incl. GST $55.00
  • Battery, 3.6 V/0.8 Ah 1/2 AA

    Order-Nr. 0515 0175

    Battery, 3.6 V/0.8 Ah 1/2 AA
    $32.00
    incl. GST $32.00
  • Spare particle filter, pack of 20

    Order-Nr. 0554 3381

    The spare dirt filter protects your analyzer unit against dirt.
    • Reliable protection against dirt particles

    • 20 off

    $141.00
    incl. GST $155.10
  • Sintered PTFE filter, Ø 12 mm, for corrosive media

    Order-Nr. 0554 0756

    Sintered PTFE filter, Ø 12 mm, for corrosive media
    $89.00
    incl. GST $97.90
  • Emission tape - for measurements on reflective surfaces

    Order-Nr. 0554 0051

    Use the emission tape when you are using your thermal imager to measure on reflective surfaces, for example metal.
    • Tape for measurements on reflective surfaces

    • Temperature-resistant up to +250 °C

    • Emissivity (ɛ) of 0.95

    $136.00
    incl. GST $149.60
  • CO replacement filter for sensor

    Order-Nr. 0554 4100

    Cross sensitivity to NO and SO2 is blocked by the CO sensor replacement filter during flue gas analysis.
    • Exchangeable probe for CO sensor

    • Blocks cross sensitivity to NO and SO2

    $191.00
    incl. GST $210.10
  • Spare dirt filters (10 off) - for condensate trap in the gas sampling hose and measuring range extension

    Order-Nr. 0554 3371

    The spare dirt filter enables you to reliably protect the condensate trap in the gas sampling hose and measuring range extension (gas dilution) against dirt.
    • Reliable protection against dirt particles

    • 10 off

    $95.00
    incl. GST $104.50
  • Spare sintered filters (2 off)

    Order-Nr. 0554 3372

    The spare sintered filter enables you to replace your probe’s pre-filter without any problem.
    • For replacing the probe pre-filter

    • Ideal for measuring flue gases with a high dust content

    • Protects against damage caused by dust

    $169.00
    incl. GST $185.90
  • Testo rechargeable battery pack NiMH for control unit tesot ...

    Order-Nr. 0515 0097

    Testo rechargeable battery pack NiMH for control unit tesot 350-S/-XL
    $282.00
    incl. GST $310.20
  • NO replacement filter for sensor

    Order-Nr. 0554 4150

    Cross sensitivity to SO2 is blocked by the NO sensor replacement filter during flue gas analysis.
    • Exchangeable probe for NO sensor

    • Blocks cross sensitivity to SO2

    $211.00
    incl. GST $232.10
  • Probe shaft, length 335 mm, incl. cone, Ø 8 mm, Tmax 1000 °C

    Order-Nr. 0554 8764

    The probe shaft with integrated thermocouple enables temperature measurements up to 1000°C. The quick-change click system enables the probe shaft to be fixed onto the appropriate handle really easily.
    • Easy probe shaft change via quick-change click system

    • For temperature measurements up to 1000°C

    • Length of 335 mm

    $699.00
    incl. GST $768.90
  • Probe shaft, length 700 mm, incl. cone, Ø 8 mm, Tmax. 1000 °...

    Order-Nr. 0554 8765

    The probe shaft with integrated thermocouple enables temperature measurements up to 1000°C. The quick-change click system enables the probe shaft to be fixed onto the appropriate handle really easily.
    • Easy probe shaft change via quick-change click system

    • For temperature measurements up to 1000°C

    • Length of 700 mm

    $972.00
    incl. GST $1 069.20
  • Additional battery. Additional lithium-ion rechargeable batt...

    Order-Nr. 0554 8852

    Additional battery. Additional lithium-ion rechargeable battery for extending the operating time.
    • Spare battery for extending the operating time

    • Can be used as a second battery

    $272.00
    incl. GST $299.20
  • Metal protection cap

    Order-Nr. 0554 0755

    The open metal protection cap protects the sensor mechanically from damage by touching.
    $61.00
    incl. GST $67.10
  • PTFE sintered filter, Ø 21 mm, for corrosive substances

    Order-Nr. 0554 0666

    PTFE sintered filter, Ø 21 mm, for corrosive substances
    $100.00
    incl. GST $110.00
41 Products found
Show More