testo 330-2 LL flue gas set H2 - Professional long-life set for customer service and service engineers

Order-Nr.  0563 3372 70

  • 330-2 LL flue gas analyzer with fresh air valve to protect the CO measuring cell and to extend the CO measuring range to 30,000 ppm 

  • 4-year warranty on the probes which users can change themselves, including sensor monitoring with a service life of up to 6 years

  • Single-hose connection: just one hand movement is needed to securely connect all the channels for flue gas measurement (gas paths, draught, temperature probe integrated into the flue gas probe)

  • TÜV-tested according to 1st German Federal Immission Control Ordinance (BImSchV) EN 50379, Parts 1-3

Ready to get started on the most important tasks involved in flue gas analysis on oil, gas and solid fuel systems: the testo 330-2 LL professional long-life set offers the possibility of flue gas measurement, draught, pressure and ambient CO/CO2 measurements, differential temperature measurement and gas leak detection. You get practical accessories in the flue gas analysis set (flue gas probe, hose connection set, Bluetooth printer, etc.).

Product Description

The testo 330-2 LL professional long-life set for customer service and service engineers means you have the professional equipment you need for all measuring tasks to do with heating systems. The comprehensive selection of gas probes enables a really wide range of flue gas measurements – there is therefore generally no need for any other measuring instrument. You can define other fuels yourself as required. The successful combination of outstanding sensor technology, longevity and reliability make the testo 330-2 LL flue gas analyzer a real mainstay. The sensor service life of up to 6 years means that you can dispense with at least one sensor replacement during the typical period of use.

Flexible to use for flue gas analysis – the applications

The flue gas analysis set already contains all the accessories required for the most important measuring tasks to do with heating. You can extend it for additional measurements, thanks to a large range of probes and sensors, if needs be. Suitable for the following applications:
  • Flue gas measurement (combustion air temperature, flue gas temperature, O2, CO and CO2 concentration and as an option: NO / NO2, flue gas loss, gas-air ratio and efficiency)
  • Draught measurement in parallel to flue gas measurement
  • Gas flow and static gas pressure (with optional pressure connection set)
  • 4 Pa measurement (with optional fine pressure probe)
  • Gas leak detection (with optional probes)
  • Ambient CO / CO2 measurement (with optional probe)
  • Differential temperature measurement to determine the spread between flow and return (with optional probe)
  • CO measurement with 15-minute mean value calculation
  • Data recording for up to 2 hours possible
  • Performance of gas tightness tests (150 mbar, with optional pressure connection set)
  • Automatic burner error diagnosis through optional readout adapter (for digital automatic furnaces)
 

Versatile, robust and efficient – the advantages of the flue gas analyzer

The flue gas analyzer has three high-quality sensor sockets – for the permanently integrated O2 sensor, the configurable CO sensor and an optional NO sensor. This means it meets the statutory provisions of the German Federal Immission Control Ordinance (BImSchV). Without H2 compensation, the CO sensor offers a measuring range of up to 4,000 ppm, with H2 compensation the measuring range increases to 30,000 ppm.
The reliable instrument diagnosis includes the instrument leaktightness test, along with continuous checking of the capacity of the measuring cells.

A temperature probe is integrated into the flue gas probe for direct measurement of temperature, O2, CO and NO. This enables calculation of all the relevant flue gas parameters, such as CO2 value, efficiency, flue gas loss and NO2 (with optional 3rd sensor). In addition, direct draught or pressure measurements are also possible.

There is automatic fresh air dilution as from 8,000 ppm for CO measurement. This means that the CO measuring cell is also protected, which is positive in terms of the long service life of up to 6 years, and the measuring range is increased to 30,000 ppm.

Zeroing without probe removal enables the probe to remain in the flue during zeroing. This saves time and laborious flushing.

The high-resolution graphic colour display presents readings graphically and can also easily be read in poor light conditions. Self-explanatory menu guidance and standardized measuring processes make the flue gas analyzer really easy to operate with just a few clicks.

You get a 4-year warranty on the flue gas analyzer, probe and O2/CO sensor.

Further impressive advantages of the professional long-life set for flue gas measurements

  • Long service life thanks to the long-life Li-ion rechargeable battery which you can replace yourself
  • Integrated magnets for fast fixing of the flue gas analyzer onto the burner/boiler
  • Integrated condensate trap that is very easy to empty
  • Single-hose connection: just one hand movement is needed to securely connect all channels for flue gas measurement via the probe coupling (gas paths, draught, temperature probe integrated in the flue gas probe)
  • Memory for 500,000 readings with chronological storage of the measurement results for each customer
  • Bluetooth interface
  • Printer for data printout directly at the measuring location (connected to the flue gas analyzer via Bluetooth)
  • Free App for Android smartphones and tablets (use via Bluetooth): where there is a large distance from the measuring point, the measurement data can be transferred from the flue gas analyzer to a smartphone or tablet. Logging and dispatch to customers possible with the App
  • EasyHeat PC software (optional): create customer profiles on the PC saving lots of time, print out measurement protocols as professional reports with just a few clicks

 

Delivery Scope

- testo 330-2LL flue gas analyzer, including long-life gas sensors with integrated draught and gas zeroing, O2/CO cell (CO cell with H2 compensation), Bluetooth, graphic display, rechargeable battery and calibration protocol
- Mains unit for mains operation or charging the rechargeable battery in the flue gas analyzer
- Modular flue gas probe (length 300 mm, Ø 8 mm)
- Combustion air temperature probe (length 190 mm)
- Hose connection set for separate gas pressure measurement
- Bluetooth printer
- Instrument case (height: 130 mm) for flue gas analyzer, probes and accessories
Differential Pressure - Piezoresistive

Measuring range

±10000 Pa

Accuracy

±0.3 Pa (0 to 9.99 Pa) plus ±1 Digit

±3 % of mv (10 to 10000 Pa) plus ±1 Digit

Flue gas O₂

Measuring range

0 to 21 Vol.%

Accuracy

±0.2 Vol.%

Resolution

0.1 Vol.%

Reaction time t₉₀

< 20 s

Flue gas CO (with H₂-compensation)

Measuring range

0 to 8000 ppm

Accuracy

±10 ppm or ±10 % of mv (0 to 200 ppm)

±20 ppm or ±5 % of mv (201 to 2000 ppm)

±10 % of mv (2001 to 8000 ppm)

Resolution

1 ppm

Reaction time t₉₀

< 60 s

Flue gas COlow

Measuring range

0 to 500 ppm

Accuracy

±2 ppm (0 to 39.9 ppm)

±5 % of mv (40 to 500 ppm)

Resolution

0.1 ppm

Reaction time t₉₀

< 40 s

CO determination (with H₂-compensation), automatic dilution

Measuring range

0 to 30000 ppm

Accuracy

±100 ppm (0 to 1000 ppm)

±10 % of mv (1001 to 30000 ppm)

Resolution

1 ppm

Flue gas NO

Measuring range

0 to 3000 ppm

Accuracy

±5 ppm (0 to 100 ppm)

±5 % of mv (101 to 2000 ppm)

±10 % of mv (2001 to 3000 ppm)

Resolution

1 ppm

Reaction time t₉₀

< 30 s

Flue gas Nolow

Measuring range

0 to 300 ppm

Accuracy

±2 ppm (0 to 39.9 ppm)

±5 % of mv (40 to 300 ppm)

Resolution

0.1 ppm

Reaction time t₉₀

< 30 s

Flue gas Draught

Measuring range

-9.99 to +40 hPa

Accuracy

±0.02 hPa or ±5 % of mv (-0.50 to +0.60 hPa)

±0.03 hPa (+0.61 to +3.00 hPa)

±1.5 % of mv (+3.01 to +40.00 hPa)

Resolution

0.01 hPa

Temperature

Measuring range

-40 to +1200 °C

Accuracy

±0.5 °C (0 to +100.0 °C)

±0.5 % of mv (Remaining Range)

Resolution

0.1 °C (-40 to +999.9 °C)

1 °C (> +1000 °C)

Flue gas degree of effectivity, Eta (calculated)

Measuring range

0 to 120 %

Resolution

0.1 %

Flue gas loss (calculated)

Measuring range

0 to 99.9 %

Resolution

0.1 %

Flue gas CO₂ calculation (calculated from O₂)

Measuring range

0 to CO₂ max (Display range)

Accuracy

±0.2 Vol.%

Resolution

0.1 Vol.%

Reaction time t₉₀

< 40 s

Velocity / Volume flow

Measuring range

0.15 to 3 m/s

Resolution

0.1 m/s

Pressure measurement

Measuring range

0 to +300 hPa

Accuracy

±0.5 hPa (0.0 to 50.0 hPa)

±1 % of mv (50.1 to 100.0 hPa)

±1.5 % of mv (Remaining Range)

Resolution

0.1 hPa

Flue gas CO (without H₂-compensation)

Measuring range

0 to 4000 ppm

Accuracy

±20 ppm (0 to 400 ppm)

±5 % of mv (401 to 2000 ppm)

±10 % of mv (2001 to 4000 ppm)

Resolution

1 ppm

Reaction time t₉₀

< 60 s

Ambient CO

Measuring range

0 to 500 ppm

Accuracy

±5 ppm (0 to 100 ppm)

±5 % of mv (> 100 ppm)

Resolution

1 ppm

Reaction time

Approx. 35 s

with CO probe

Ambient CO₂

Measuring range

0 to 1 Vol.%

0 to 10000 ppm

Accuracy

±50 ppm or ±2 % of mv (0 to 5000 ppm)

±100 ppm or ±3 % of mv (5001 to 10000 ppm)

Reaction time

Approx. 35 s

with ambient CO₂ probe

Gas leak measurement for combustible gases (via gas leak detection probe)

Measuring range

0 to 10000 ppm CH₄ / C₃H₈; Display range

Accuracy

Signal optical display (LED) audible signal via buzzer

Reaction time t₉₀

< 2 s

with gas leak detection probe

Temperature (via the fine pressure probe)

Measuring range

-40 to +1200 °C max. (dependent on probe)

Accuracy

±0.5 °C (-40 to 100 °C)

±0.5 % of mv (Remaining Range) plus probe accuracy

Resolution

0.1 °C

General technical data

Dimensions

270 x 90 x 65 mm

Operating temperature

-5 to +45 °C

Display size

240 x 320 pixels

Display function

Colour graphic display

Power supply

Rechargeable battery pack 3.7 V / 2.6 Ah; Mains unit 6 V / 1.2 A

Maximum

500,000 readings

Storage temperature

-20 to +50 °C

Weight

600 g (without rechargeable battery)

Product Brochures

Software

  • USB FlashUpdate testo 330  (EXE, 680.4 kB)

  • USB FlashUpdate testo 330 Shortdiscription  (PDF, 222.8 kB) This software supports you in updating the software of your testo 330. Please read the instruction manual (german / english) for more information.

  • Update-Kit / Bootloader  (EXE, 380 KB) It is partially not possible to execute a firmware update with Windows 8.1 / Windows 10. This can be solved by installing a new Bootloader once.
    A description and all necessary files can be found under Update-Kit / Bootloader

  • Testo ZIV driver ZIV 2000 for testo 320 and testo 330  (ZIP, 8.8 MB) Testo ZIV driver in the 2000 version. The Testo ZIV driver is used to connect the testo 320 and testo 330 measuring instruments to an application program (sweeping district administration program) according to the interface Version 2.0 defined by the Zentralverband des Schornsteinfegerhandwerks (Central Association of Chimney Sweeps, ZIV). Please check with the manufacturer of your application program as to whether this interface is supported. If Microsoft .NET Framework 4.0 has not been installed on the computer, it must be downloaded from the Microsoft website and installed on the system.

  • Testo ZIV driver ZIV 2013 (32 Bit) for testo 320 and testo 330   (ZIP, 8.7 MB) Testo ZIV driver in the version dated 01/08/2012. The Testo ZIV driver is used to connect the testo 320 and testo 330 measuring instruments to an application program (sweeping district administration program) according to the interface defined by the Zentralverband des Schornsteinfegerhandwerks (ZIV, Central Association of Chimney Sweeps). Please check with the manufacturer of your application program as to whether this interface is supported. If Microsoft .NET Framework 4.0 has not been installed on the computer, it must be downloaded from the Microsoft website and installed on the system.

  • Testo ZIV driver ZIV 2013 (64 Bit) for testo 320 and testo 330   (ZIP, 8.639 KB) Testo ZIV driver in the version dated 01/08/2012. The Testo ZIV driver is used to connect the testo 320 and testo 330 measuring instruments to an application program (sweeping district administration program) according to the interface defined by the Zentralverband des Schornsteinfegerhandwerks (ZIV, Central Association of Chimney Sweeps). Please check with the manufacturer of your application program as to whether this interface is supported. If Microsoft .NET Framework 4.0 has not been installed on the computer, it must be downloaded from the Microsoft website and installed on the system.

  • Software EasyHeat for testo 312-4, 320, 324, 330, 380  (v2.11 ServicePack 1, EXE, 101.938 KB) If you already have the testo EasyHeat software installed, your version will be updated. The Update is possible with every version of the testo EasyHeat. This version can also be used as a demo version for  costumers  who don't have installed the testo easyheat software at the moment. It will void after 30-days, but can be activated with a serial code at every time.

  • Instruction manual EasyHeat software  (PDF, 3.053 KB)