testo 330i LX - Flue gas analyzer (O2, CO)

Order-Nr.  0632 6035 70

  • Includes O2 and CO sensor

  • 5-year warranty without a maintenance contract on O2 and CO sensors

  • Operation independent of measuring location, paperless documentation and report generation on site via smartphone App

  • Flue gas analyzer tested and certified by the German Technical Safety Standards Authority (TÜV) according to the first German Federal Immission Control Ordinance (BImSchV) and EN 50379, Parts 1 to 3

Flue gas analysis with no stress, paper or shaky probes – the testo 330i LX flue gas analyzer operated by smartphone App makes this possible. Use the flue gas analyzer certified by the German Technical Safety Standards Authority (TÜV), including O2 and CO sensor for the maintenance and commissioning of gas, oil and solid fuel systems.

Product Description

In order to commission and service heating systems as quickly and thoroughly as possible, you need the appropriate flue gas analyzer. The testo 330i LX combines the proven measuring technology of its predecessor, the testo 330 LL, with smart handling.
 

Flue gas analyzer testo 330i LX applications

In combination with our modular flue gas probes (please order separately) you can be sure of great flexibility; use the testo 330i LX for the following applications:
 
  • Measurement of the flue gas parameters CO and O2 as well as the flue gas temperature in the heating system
  • Draught measurement on heating systems
  • Other measurement parameters are calculated on the basis of the measured values, e.g. flue gas loss, level of efficiency, and Lambda
 
Use other connectible probes and accessories (please order separately) for the following applications:
 
  • Gas flow pressure measurement on the burner with hose connection set (0554 1203)
  • O2 supply air measurement with dual wall clearance probe (0632 1260)
  • Measuring the flow and return temperature with differential temperature set (0554 1208)
  • Temperature in the combustion air with combustion air temperature probe (e.g. 0600 9787)

Flue gas analyzer operated by smartphone - equipment
 
  • Sophisticated long-life sensors for O2 and CO are included in scope of delivery. The sensors have a service life of up to 6 years. This means at least one sensor replacement is saved in the course of a normal operating life
  • 5-year warranty without a maintenance contract on O2 and CO sensor
  • Easy exchange of the sensors by the user – no adjustment necessary
  • Tested and certified by the German Technical Safety Standards Authority (TÜV) according to the first German Federal Immission Control Ordinance (BImSchV) and EN 50379, Parts 1-3
  • Integrated draught and gas zeroing without removing the probe – the probe (please order separately) can remain in the flue during zeroing
  • Fresh air dilution when a CO threshold value is exceeded up to 15,000 ppm
  • Smart handling: operation of the analyzer and the display and documentation of readings are implemented wirelessly via the testo 330i App on your smartphone. The flue gas analyzer is really easy to control remotely via Bluetooth®, from a distance of up to 10 metres. Once you have finished the measurement, you can add comments or photos to the measurement protocol and send it to your customer or the office via e-mail
  • Free testo 330i App for iOS and Android devices (available in the AppStore and Play Store). Requirements: iOS 7.1/Android 4.3 or newer; mobile terminal device with Bluetooth® 4.0
  • Built-in magnets enable the flue gas analyzer to be attached to the burner/boiler quickly
 
The new testoFix probe mount is available as an accessory, so the flue gas probe (please order separately) is guaranteed not to lose the centre of flow once found. This can be attached to the pipe quickly and easily. It holds the flue gas probe in the centre of flow and also serves as a fall-proof suspension system for the testo 330i LX flue gas analyzer.

 

Delivery Scope

testo 330i LX Abgas-Analysegerät mit LongLife-Gassensoren, 3 Steckplätzen und integrierter Zug- und Gasnullung. Inkl. O2- und CO-Sensor, Akku und Kalibrierprotokoll (0632 6035 70).
 
Flue gas O₂

Measuring range

0 to 21 Vol.%

Accuracy

±0.2 Vol.%

Resolution

0.1 Vol.%

CO determination (without H₂-compensation), automatic dilution in testo 320-2 LL

Measuring range

0 to 15000 ppm

Accuracy

±200 ppm or ±20 % of mv (0 to 15000 ppm)

Resolution

1 ppm

Flue gas NO

Measuring range

0 to 3000 ppm

Accuracy

±5 ppm (0 to 100 ppm)

±5 % of mv (101 to 2000 ppm)

±10 % of mv (2001 to 3000 ppm)

Resolution

1 ppm

Option

Flue gas Draught

Measuring range

-9.99 to +40 hPa

Accuracy

±0.02 hPa or ±5 % of mv (-0.50 to +0.60 hPa)

±0.03 hPa (+0.61 to +3.00 hPa)

±1.5 % of mv (+3.01 to +40.00 hPa)

Resolution

0.01 hPa

Temperature

Measuring range

-40 to +1200 °C

Accuracy

±0.5 °C (0.0 to +100.0 °C)

±0.5 % of mv (Remaining Range)

Resolution

0.1 °C (-40 to +999.9 °C)

1 °C (Remaining Range)

dependent on the thermocouple

Flue gas degree of effectivity, Eta (calculated)

Measuring range

0 to 120 %

Resolution

0.1 %

Flue gas loss (calculated)

Measuring range

0 to 99.9 %

Resolution

0.1 %

Flue gas CO₂ calculation (calculated from O₂)

Measuring range

Display range 0 to CO₂ max

Accuracy

±0.2 Vol.%

Resolution

0.1 Vol.%

Pressure measurement

Measuring range

0 to +300 hPa

Accuracy

±0.5 hPa (0.0 to 50.0 hPa)

±1 % of mv (50.1 to 100.0 hPa)

±1.5 % of mv (Remaining Range)

Resolution

0.1 hPa

Flue gas CO (without H₂-compensation)

Measuring range

0 to 4000 ppm

Accuracy

±20 ppm (0 to 400 ppm)

±5 % of mv (401 to 2000 ppm)

±10 % of mv (2001 to 4000 ppm)

Resolution

1 ppm

General technical data

Dimensions

270 x 160 x 57 mm

Operating temperature

-5 to +45 °C

Power supply

Rech. batt. block 3.7 V / 2.6 Ah; Mains unit 6 V / 1.2 A (optional)

System requirements

requires iOS 7.1 or newer; requires Android 4.3 or newer; requires mobile end device with Bluetooth 4.0

Maximum memory

500000 readings

Storage temperature

-20 to +50 °C

Weight

720 g (excluding battery)