testo 417 - Large Vane Anemometer

Order-Nr. 0560 4170

$667.00

incl. GST $733.70

4 in 1 Measurement, Air Flow, Velocity, Volume Flow, Temperature
Auto Hold Function
Large, backlit, easy to read display
Optional Attachable measurement funnels

The testo 417 large vane anemometer allows you to carry out quick and precise measurements at air inlets and outlets. The easy-to-read display shows air flow speed and direction as well as volumetric flow rate and temperature. The meter can also calculate the mean time value, average value and minimum and maximum value at the touch of a key.

Details

Product Description

The testo 417 is a anemometer with built-in Ø 100 mm vane to measure flow speed, volume flow and temperature. Volume flow is shown directly in the display. Accurate volume flow calculation thanks to easy input of duct area. In addition, it is easy to switch to the current temperature reading.

The flow direction, i.e. drawn in or blowing, is visible in the display. Timed and multi-point mean calculation provide information on mean volume flow, flow speed and temperature readings. The optional funnel set facilitates efficient measurements at ventilator grilles and disc outlets. Min/max values can also be shown in the display. Current readings can be frozen in the display using the Hold function.

Direction of flow recognition
Temperature, flow and volume flow measurement
Multi-point and timed mean calculation
Max/min values
Hold button to freeze readings
Display light
Auto Off function
Built-in Ø 100 mm vane

Delivery Scope

Testo 104 waterproof foldable food thermometer|user guide | protocol certificate |adhesive color strips, batteries.

Technical Data

General technical data
Weight	230 g
Dimensions	277 x 105 x 45 mm
Operating temperature	0 to +50 °C
Product-/housing material	ABS
Battery type	9V block battery, 6F22
Battery life	50 h
Storage temperature	-40 to +70 °C

Temperature - NTC
Measuring range	0 to +50 °C
Accuracy	±0.5 °C
Resolution	0.1 °C

Velocity - Vane
Measuring range	+0.3 to +20 m/s
Accuracy	±(0.1 m/s + 1.5 % of mv)
Resolution	0.01 m/s

Volume flow
Measuring range	0 to +99999 m³/h 0 to +440 m³/h (testo 417 in combination with funnel set (0563 4170)) 0.1 to +200 m³/h , preferred 0,1 to 100 m³/h (testo 417 in combination with funnel & flow straightener (0554 4172))
Resolution	0.1 m³/h (0 to +99.9 m³/h) 1 m³/h (+100 to +99999 m³/h)

Volume flow

Measuring range

0 to +99999 m³/h

0 to +440 m³/h (testo 417 in combination with funnel set (0563 4170))

0.1 to +200 m³/h , preferred 0,1 to 100 m³/h (testo 417 in combination with funnel & flow straightener (0554 4172))

Resolution

0.1 m³/h (0 to +99.9 m³/h)

1 m³/h (+100 to +99999 m³/h)

Accessories

ISO flow calibration certificate for hot wire and vane anemometers; with 4 measuring points: 0.3 / 0.5 / 0.8 / 1.5 m/s

Order Number: 0520 0024

DAkkS flow calibration certificate for hot wire anemometers, vane anemometers and Pitot tubes; with 5 measuring points: 0.5 / 1 / 2 / 5 / 10 m/s

Order Number: 0520 0244

testovent 417 funnel set for volume flow measurement, consisting of a funnel for plate outlets (Ø 200 mm) and a funnel for ventilation grilles (330 x 330 mm), used with 100 mm vane

Order Number: 0563 4170

$344.00

incl. GST $378.40

Applications

Measurement of volumetric flow, flow velocity and temperature

Every duct inlet and outlet should only contain the volumetric flow that according to calculations is a basic prerequisite to an efficient functional system.

Particularly large vane anemometers are suitable for measuring the volumetric flows at duct outlets, as these integrate the flow velocity over a larger area thereby determining disturbance from the air grille (loop method).

A volumetric flow rate funnel and a large vane are ideal when taking readings at the suction or blowing vents of air grilles and poppet valves. The entire volumetric flow is recorded with the aid of the funnel without the need for conversion on the basis of the flow velocity and area. This method of flow measurement is simple and reliable.

The compact anemometer testo 417 with integrated flow/temperature vane (Ø 100 mm) is ideal for measuring the flow velocity, volumetric flow and temperature at duct outlets. The optional funnel set allows measurements at ventilation grilles and poppet valves.

testo 417 - Large Vane Anemometer

testo 417 - Large Vane Anemometer

Details

Product Description

Delivery Scope

Technical Data

Accessories

Accessories

Applications

Measurement of volumetric flow, flow velocity and temperature

Downloads

Product Brochures

Manuals

testo 417 - Large Vane Anemometer