testo 905-T1 penetration thermometer

The Testo 905-T1 penetration thermometer has a large measuring range from -50 to +350 °C and can even measure up to +500 °C for a short time (1 to 2 minutes). Its permanently integrated type K thermocouple probe makes this possible. In addition, the penetration thermometer is characterized by its short response time. The thermocouple probe reacts very quickly, particularly in water (or other liquids). The penetration thermometer is therefore ideally suited for measurements in fluid substances in laboratory, chemical and pharmaceutical areas.

However, as well as immersion/penetration of the long, pointed probe shaft in liquids and soft or powdery substances being possible, you can also insert it in ventilation ducts to measure the temperature there. The penetration thermometer is also a winner when it comes to accuracy, because it achieves a higher level than typical comparable models.

A really user-friendly penetration thermometer

The Testo 905-T1 penetration thermometer is easy to use and very user-friendly. The measuring values are shown very legibly on the display. The fact that the display can be pivoted also makes reading easier. This is particularly practical, since the measuring values can be read off perfectly from many different perspectives.

Temperature	Measuring range -50 to +350 °C (short-term to +500 °C)
Accuracy ±1 °C (-50 to +99.9 °C) ±1 % of mv (Remaining Range)
Resolution 0.1 °C
Reaction time t₉₉ = 10 s (in water)

Measuring range

-50 to +350 °C (short-term to +500 °C)

Accuracy

±1 °C (-50 to +99.9 °C)

±1 % of mv (Remaining Range)

Resolution

0.1 °C

Reaction time

t₉₉ = 10 s (in water)

General technical data	Weight 80 g
Dimensions 270 x 40 x 70 mm ((LxWxH))
Operating temperature 0 to +40 °C
Product-/housing material ABS
Product colour Black
Authorizations CE 2014/30/EU
Length probe shaft 200 mm
Length probe shaft tip 4 mm
Diameter probe shaft 3 mm
Battery type 3 AAA micro batteries
Battery life 1000 h
Display type LCD (Liquid Crystal Display)
Display size one-line
Storage temperature -20 to +70 °C

Weight

80 g

Dimensions

270 x 40 x 70 mm ((LxWxH))

Operating temperature

0 to +40 °C

Product-/housing material

ABS

Product colour

Black

Authorizations

CE 2014/30/EU

Length probe shaft

200 mm

Length probe shaft tip

4 mm

Diameter probe shaft

3 mm

Battery type

3 AAA micro batteries

Battery life

1000 h

Display type

LCD (Liquid Crystal Display)

Display size

one-line

Storage temperature

-20 to +70 °C

testo 905-T1 - Probe Thermometer

testo 905-T1 - Probe Thermometer

A really user-friendly penetration thermometer

Temperature

Temperature

General technical data

General technical data

Certificates