Vane

33 products or recommendations for Vane
  • testo Smart Probes VAC set - with smartphone operation

    Order-Nr. 0563 0003

    With the Testo Smart Tools VAC set, you can check air velocities, humidity, volume flows and temperatures in, on and around air conditioning systems. The robust testo Smart Case enables the measuring instruments to be conveniently transported and ensures that they are always to hand when needed.

    • Easy parametrization of the outlet/duct cross-section for measuring the volume flow

    • List of multiple volume flows and calculation of the total volume flow (in the log)

    • Identification of mould risk thanks to the combined utilization of testo 605i and testo 805i

    • Rapid image documentation with IR temperature readings and measuring spot marking

  • testo 480 - Climate Measurement Tool 

    Order-Nr. 0563 4800

    Air flow measurements in ducts, temperature measurements in laboratories, humidity measurements in production, pressure difference measurements in clean rooms. The Testo 480 climate measurement meter with a wide range of optional probes that allows you to measure, analyse and log these and a variety of other parameters with only one device. 

    • Measure multiple parameters Temperature, Humidity, Pressure Turbulence, Heat radiation, Co2 Lux, PMV/PPD, WBGT 

    • Professional software for reporting & data logging 

    • Highly accurate digital probes 

    • Intelligent calibration concept

  • testo 435-2 - Multi Function IAQ Instrument 

    Order-Nr. 0563 4352

    The Testo 435-2 multi function meter is designed to allow you to carry out multiple measurements that are necessary to check and adjust ventilation and air conditioning systems and assess the quality of the indoor air. 

    • Measures Multiple Parameters
      C, RH, Co2, Co, Pressure, Draught,
      Air velocity, Volumetric Flow, Turbulance,
      U Value, Lux 

    • Illuminated Display 

    • Large Range of Probes 

    • Large display 

  • testo 416 - Small Head Vane Anemometer 

    Order-Nr. 0560 4160

    Vane anemometer with telescopic sensor – ideal for carrying out airflow measurements in air ducts.

    • Permanently connected telescopic sensor – maximum length 890 mm, diameter 16 mm

    • Airflow measurements, selective and time mean values for calculating air volume

    • Hold function; min/max display; auto power off

    • Calibration certificate and batteries included

  • testo 445 - climate measuring instrument

    Order-Nr. 0560 4450

    You can keep a close eye on indoor air quality with the testo 445 climate measuring instrument: the allrounder can measure up to 6 parameters (with the appropriate probe), which can help you make a professional assessment of indoor air quality. The climate measuring instrument therefore supports you in adjusting and checking ventilation and air conditioning systems.

    • Multi-function climate measuring instrument: measure up to 6 measurement parameters at the same time

    • Internal reading memory for up to 3,000 readings

    • Automatic allocation of the duct cross-section to the measuring location (max. 99 measuring locations)

    • Automatic mean value calculation and determination of the volume flow

  • testo 410-2 - Velocity Humidity and Temperature Meter 

    Order-Nr. 0560 4102

    Ideal for quick measurement at ventilation grilles (air outlets) and for inspecting air conditions – also outdoors: use the Testo 410-2 vane anemometer to measure humidity, as well as air velocity and air temperature. Dew point and wet bulb temperature, wind chill or Beaufort wind force: the anemometer can accomplish the calculation of all these parameters at the touch of a button. 

    • Anemometer with 40MM vane 

    • 2 in 1 Air Velocity & Air Temperature 

    • Windchill calculation for outside areas
      (perceived temperature) 

    • Calculates dew point and wet bulb temperature 

  • testo 410 i - vane anemometer with smartphone operation

    Order-Nr. 0560 1410

    Professional measuring technology in a small format: the compact testo 410i vane anemometer with smartphone operation measures the volume flow, air velocity and temperature at air outlets quickly and reliably. The testo Smart Tools App enables readings to be viewed conveniently and offers intelligent additional functions. 

    • Measurement of air velocity, volume flow and temperature

    • Display of the volume flow of multiple outlets in order to adjust systems

    • Easy parametrization of the outlet (dimension and geometry)

    • Convenient viewing of readings on a smartphone/tablet with the testo Smart Tools App 

  • testo 435-1 - Temp, Humidity, Co2 & Absolute Pressure 

    Order-Nr. 0560 4351

    The Testo 435-1 IAQ Kit is a multifunction instrument for measuring and assessing Indoor Air Quality and for adjusting and inspecting VAC systems.The Testo 435-1 is an affordable introduction to measurement engineering for ambient air conditions. Readings from up to 3 temperature probes can be displayed on the screen. Measurement data can also be printed on site with the Testo printer. 

    • Measures Multiple Parameters
      Temperature, Humidity, CO2, Pressure 

    • Illuminated Display 

    • Large Range of Probes 

    • Large display 

  • testo 435-3 - Multi-function climate measuring instrument

    Order-Nr. 0560 4353

    testo 435-3 – multi-function climate measuring instrument with integrated differential pressure measurement. You can use this to carry out measurements which you need to adjust ventilation and air conditioning systems and assess room air quality. For this we offer a comprehensive range of optional probes and sensors to choose from.

    • Includes differential pressure measurement for filter monitoring or for measurement with a Pitot tube

    • Further optional probes can be attached: thermal and vane anemometers, along with probes for air humidity, CO2, absolute pressure and temperature

    • Display of dew point distance, min., max. and mean values

    • Illuminated display

  • testo 410-1 - Pocket Sized Vane Anemometer 

    Order-Nr. 0560 4101

    The Testo 410-1 vane anemometer measures air velocity and air temperature. Use it to carry out quick spot measurements at ventilation grilles (air outlets). The anemometer is also ideal for use outdoors. It displays the units m/s, km/h, fpm, mph and kts, and also calculates wind chill and the Beaufort wind force. 

    • Anemometer with 40MM vane 

    • 2 in 1 Air Velocity & Air Temperature 

    • Windchill calculation for outside areas
      (perceived temperature) 

    • Timed mean value calculation 

  • Vane meas. probe - 16 mm diameter

    Order-Nr. 0635 9535

    The vane probe (in conjunction with the appropriate measuring instrument) is ideal for determining flow velocity and volume flow in ventilation ducts.

    • Probe head 16 mm in diameter

    • With telescope (can be extended to 890 mm) for larger ventilation ducts

    • Measuring range: 0.6 to +40 m/s

  • Vane probe (Ø 60 mm) - for flow measurements at air outlets

    Order-Nr. 0635 9335

    The vane probe (in conjunction with the appropriate measuring instrument) is ideal for determining flow velocity and volume flow at ventilation outlets or duct outlets.

    • Vane diameter: 60 mm

    • With telescope (can be extended to 910 mm)

    • Measuring range: +0.25 to +20 m/s

  • Vane/temperature probe (Ø 100 mm) - for air outlets

    Order-Nr. 0635 9435

    The vane/temperature probe (in conjunction with the appropriate measuring instrument) is ideal for determining flow velocity or volume flow at ventilation outlets. For measurements at plate outlets and ventilation grilles, it is particularly recommended to use the vane probe in conjunction with the testo 435 measuring instrument and the testovent 417 funnel set (both available separately).

    • Vane diameter: 100 mm

    • Integrated temperature measurement up to +50 °C

    • Flow measuring range +0.3 to +20 m/s

  • Vane/temperature probe (Ø 16 mm) - for ventilation ducts

    Order-Nr. 0635 9542

    The vane/temperature probe (in conjunction with the appropriate measuring instrument) is ideal for determining flow velocity and volume flow in ventilation ducts. It can also measure the temperature at the same time.

    • Integrated temperature measurement up to +70 °C

    • With telescope (can be extended to 960 mm)

    • Intelligent calibration concept

    • Flow measuring range: 0.6 to +50 m/s

  • Vane/temperature probe

    Order-Nr. 0635 9540

    The vane/temperature probe (in conjunction with the appropriate measuring instrument) is ideal for determining flow velocity and volume flow in ventilation ducts. It can also measure temperatures of up to +140 °C at the same time.

    • Probe diameter: 16 mm

    • Integrated temperature measurement up to +140 °C

    • Can be plugged onto handle (available to order)

    • Flow measuring range: 0.6 to +60 m/s

  • Vane/temperature probe (Ø 100 mm) - for air outlets

    Order-Nr. 0635 9343

    The vane/temperature probe (in conjunction with the appropriate measuring instrument) is ideal for determining flow velocity and volume flow at ventilation outlets. For measurements at plate outlets and ventilation grilles, it is particularly recommended to use the vane/temperature probe in conjunction with the testo 480 measuring instrument and the testovent 417 funnel set (both available to order).

    • Vane diameter: 100 mm 

    • Integrated temperature measurement up to +60 °C

    • Intelligent calibration concept

    • Flow measuring range: +0.1 to +15 m/s

  • Vane probe (Ø 100 mm) - for flow measurements at air outlets

    Order-Nr. 0635 9340

    The vane probe (in conjunction with the appropriate measuring instrument) is ideal for determining flow velocity and volume flow at ventilation outlets.

    • Vane diameter: 100 mm – ideal for carrying out measurements at ventilation outlets

    • Easy to operate at ceiling outlets, since the probe can be bent at a 90° angle

    • Measuring range: +0.1 to +15 m/s

  • High temperature vane probe - can be used at high temperatures

    Order-Nr. 0635 6045

    The vane probe (in conjunction with the appropriate measuring instrument) is ideal for determining flow velocity and volume flow in ventilation ducts. It can also be used at high temperatures of up to +350 °C.

    • Probe diameter: 25 mm

    • Can be used at high temperatures of up to +350 °C

    • Can be plugged onto the handle (included in the delivery)

    • Measuring range: 0.6 to +20 m/s

33 Products found
Show More