Air outlets

19 products or recommendations for Air outlets
  • testo Smart Probes VAC set - with smartphone operation

    Order-Nr. 0563 0003

    With the Testo Smart Tools VAC set, you can check air velocities, humidity, volume flows and temperatures in, on and around air conditioning systems. The robust testo Smart Case enables the measuring instruments to be conveniently transported and ensures that they are always to hand when needed.

    • Easy parametrization of the outlet/duct cross-section for measuring the volume flow

    • List of multiple volume flows and calculation of the total volume flow (in the log)

    • Identification of mould risk thanks to the combined utilization of testo 605i and testo 805i

    • Rapid image documentation with IR temperature readings and measuring spot marking

  • testo 480 - Climate Measurement Tool 

    Order-Nr. 0563 4800

    Air flow measurements in ducts, temperature measurements in laboratories, humidity measurements in production, pressure difference measurements in clean rooms. The Testo 480 climate measurement meter with a wide range of optional probes that allows you to measure, analyse and log these and a variety of other parameters with only one device. 

    • Measure multiple parameters Temperature, Humidity, Pressure Turbulence, Heat radiation, Co2 Lux, PMV/PPD, WBGT 

    • Professional software for reporting & data logging 

    • Highly accurate digital probes 

    • Intelligent calibration concept

  • testo 410-2 - Velocity Humidity and Temperature Meter 

    Order-Nr. 0560 4102

    Ideal for quick measurement at ventilation grilles (air outlets) and for inspecting air conditions – also outdoors: use the Testo 410-2 vane anemometer to measure humidity, as well as air velocity and air temperature. Dew point and wet bulb temperature, wind chill or Beaufort wind force: the anemometer can accomplish the calculation of all these parameters at the touch of a button. 

    • Anemometer with 40MM vane 

    • 2 in 1 Air Velocity & Air Temperature 

    • Windchill calculation for outside areas
      (perceived temperature) 

    • Calculates dew point and wet bulb temperature 

  • testo 410-1 - Pocket Sized Vane Anemometer 

    Order-Nr. 0560 4101

    The Testo 410-1 vane anemometer measures air velocity and air temperature. Use it to carry out quick spot measurements at ventilation grilles (air outlets). The anemometer is also ideal for use outdoors. It displays the units m/s, km/h, fpm, mph and kts, and also calculates wind chill and the Beaufort wind force. 

    • Anemometer with 40MM vane 

    • 2 in 1 Air Velocity & Air Temperature 

    • Windchill calculation for outside areas
      (perceived temperature) 

    • Timed mean value calculation 

  • testo 410 i - vane anemometer with smartphone operation

    Order-Nr. 0560 1410

    Professional measuring technology in a small format: the compact testo 410i vane anemometer with smartphone operation measures the volume flow, air velocity and temperature at air outlets quickly and reliably. The testo Smart Tools App enables readings to be viewed conveniently and offers intelligent additional functions. 

    • Measurement of air velocity, volume flow and temperature

    • Display of the volume flow of multiple outlets in order to adjust systems

    • Easy parametrization of the outlet (dimension and geometry)

    • Convenient viewing of readings on a smartphone/tablet with the testo Smart Tools App 

  • testo 435-2 - Multi Function IAQ Instrument 

    Order-Nr. 0563 4352

    The Testo 435-2 multi function meter is designed to allow you to carry out multiple measurements that are necessary to check and adjust ventilation and air conditioning systems and assess the quality of the indoor air. 

    • Measures Multiple Parameters
      C, RH, Co2, Co, Pressure, Draught,
      Air velocity, Volumetric Flow, Turbulance,
      U Value, Lux 

    • Illuminated Display 

    • Large Range of Probes 

    • Large display 

  • testo 445 - climate measuring instrument

    Order-Nr. 0560 4450

    You can keep a close eye on indoor air quality with the testo 445 climate measuring instrument: the allrounder can measure up to 6 parameters (with the appropriate probe), which can help you make a professional assessment of indoor air quality. The climate measuring instrument therefore supports you in adjusting and checking ventilation and air conditioning systems.

    • Multi-function climate measuring instrument: measure up to 6 measurement parameters at the same time

    • Internal reading memory for up to 3,000 readings

    • Automatic allocation of the duct cross-section to the measuring location (max. 99 measuring locations)

    • Automatic mean value calculation and determination of the volume flow

  • testo 435-1 - Temp, Humidity, Co2 & Absolute Pressure 

    Order-Nr. 0560 4351

    The Testo 435-1 IAQ Kit is a multifunction instrument for measuring and assessing Indoor Air Quality and for adjusting and inspecting VAC systems.The Testo 435-1 is an affordable introduction to measurement engineering for ambient air conditions. Readings from up to 3 temperature probes can be displayed on the screen. Measurement data can also be printed on site with the Testo printer. 

    • Measures Multiple Parameters
      Temperature, Humidity, CO2, Pressure 

    • Illuminated Display 

    • Large Range of Probes 

    • Large display 

  • testo 420 - Air Flow Hood 

    Order-Nr. 0563 4200

    The Testo 420 volume flow hood is suited for HVAC systems and comes with a control panel for displaying measurement data. The control panel can be tilted or removed to suit user requirement. 

    • 16 measurement points that records Temperature, Humidity, Differential & Absolute Pressure. 

    • Highly precise readings at swirl outlets thanks to flow straightener. 

    • IOS & Andriod App Integration via Bluetooth connectivity. 

    • Onsite report generation & email. 

  • testo 435-3 - Multi-function climate measuring instrument

    Order-Nr. 0560 4353

    testo 435-3 – multi-function climate measuring instrument with integrated differential pressure measurement. You can use this to carry out measurements which you need to adjust ventilation and air conditioning systems and assess room air quality. For this we offer a comprehensive range of optional probes and sensors to choose from.

    • Includes differential pressure measurement for filter monitoring or for measurement with a Pitot tube

    • Further optional probes can be attached: thermal and vane anemometers, along with probes for air humidity, CO2, absolute pressure and temperature

    • Display of dew point distance, min., max. and mean values

    • Illuminated display

  • testovent 417 funnel set - funnel set for volume flow measurement

    Order-Nr. 0563 4170

    Use the testovent 417 funnel set (in conjunction with the appropriate measuring equipment) for measuring the volume flow at ventilation grilles and plate outlets quickly and conveniently.

    • Convenient, quick volume flow measurement

    • With the funnel set, the time-consuming loop method is a thing of the past

    • Suitable for outlets up to 300 x 300 mm

    • Easy to assemble

  • Vane probe (Ø 100 mm, digital) - with Bluetooth® including temperature sensor

    Order-Nr. 0635 9431

    Use the vane probe to determine air velocity, volume flow and temperature at air outlets, as well as at plate outlets, ventilation grilles or swirl outlets. The readings are transmitted directly to your measuring instrument via Bluetooth, making your measurements particularly convenient.

    • Intuitive: clearly structured measurement menu for volume flow and parallel determination of air velocity, volume flow and air temperature

    • Precise: get the right results in next to no time, even in turbulent air flow – using the optionally available funnel set and volume flow straightener

    • Convenient: Bluetooth connection between measuring instrument and probe, with a practical button on the handle for storing individual readings, convenient measurement at ceiling outlets with optional telescope (up to 1 m)

    • Intelligent calibration concept

  • High-precision vane probe (Ø 100 mm, digital) - including temperature sensor, wired

    Order-Nr. 0635 9372

    Ideal for air outlets in cleanrooms: use the high-precision vane probe (with the compatible measuring instrument) to measure even the lowest air velocities and volume flows as well as the temperature.

    • Intuitive: clearly structured measurement menu for volume flow and parallel determination of air velocity, volume flow and air temperature

    • Precise: detects the smallest air velocities from as little as 0.1 m/s – ideal for laminar flow measurements in cleanrooms

    • Convenient: probe with a practical button on the handle for storing individual readings, convenient measurement at ceiling outlets with optional telescope (up to 1 m)

    • Intelligent calibration concept

  • testo 440 - Air velocity and IAQ measuring instrument

    Order-Nr. 0560 4401

    Precise, reliable measurement of all air velocity and IAQ parameters with just one measuring instrument: the multifunction measuring instrument features intuitive operation with clearly structured measurement menus. Adjusting air conditioning and ventilation systems, monitoring air quality or carrying out comfort level measurements – thanks to versatile options for combining with high-quality, digital probes, you are ideally equipped to carry out your measuring task (please order probes separately).

    • Intuitive: clearly structured measurement menus for volume flow, degree of turbulence, cooling/heating output, mould detection and long-term measurement, such as CO₂

    • Wireless: Bluetooth® probes for extra convenience when measuring and less cable clutter in the measuring case (please order probes separately)

    • Clear overview: large graphic display with parallel display of 3 readings

    • Safe and reliable: internal data storage and USB port for data export

  • testo 440 100 mm Vane Kit with Bluetooth®

    Order-Nr. 0563 4403

    Kit for carrying out measurements at air outlets: the testo 440 air velocity and IAQ measuring instrument and the vane probe (Ø 100 mm) with Bluetooth including temperature sensor are all safely stowed away in the case. So you can get down to work straight away!

    • Intuitive: clearly structured measurement menu for volume flow and parallel determination of air velocity, humidity and temperature in ventilation ducts or at air outlets

    • Precise: combine the vane probe with Bluetooth with the telescope for ceiling outlets or the funnel set for plate outlets (please order separately) as required

    • Convenient: wireless probe, internal data storage and USB port for your data export

    • As multifaceted as your challenges themselves: the air velocity and IAQ measuring instrument can be expanded with a large portfolio of digital probes

  • testo 440 Air Flow ComboKit 1 with Bluetooth®

    Order-Nr. 0563 4406

    Kit for carrying out measurements in ventilation ducts and at air outlets: The testo 440 air velocity and IAQ measuring instrument, the vane probe (Ø 100 mm) with Bluetooth including temperature sensor and the hot wire probe including temperature sensor are all safely stowed away in the case. So you can get down to work straight away!
     

    • Intuitive: Clearly structured measurement menus for volume flow and parallel determination of air velocity, humidity, and temperature in ventilation ducts, or at ventilation outlets

    • Smart: Hot wire probe (0.85 m) with telescope (2.8') – combine the Bluetooth vane probe (Ø 100 mm") with the telescope for ceiling outlets, or the funnel set for plate outlets (sold separately)

    • Convenient: Wireless probes, internal memory for data storage, and USB port for data export

    • Versatile: Your testo 440 setup can be expanded with a large selection of digital probes

  • testo 440 Air Flow ComboKit 2 with Bluetooth®

    Order-Nr. 0563 4407

    Kit for carrying out measurements in ventilation ducts and at air outlets: The testo 440 air velocity and IAQ measuring instrument, the vane probe (Ø 100 mm) with Bluetooth including temperature sensor and the vane probe (Ø 16 mm) are all safely stowed away in the case. So you can get down to work straight away!

    • Intuitive: Clearly structured measurement menus for volume flow and determination of air velocity, humidity, and temperature in ventilation ducts, or at ventilation outlets​

    • Smart: vane probe (Ø 16 mm) with telescope (0.85 m); combine the vane probe (Ø 100 mm) with Bluetooth with the telescope for ceiling outlets or the funnel set for plate outlets (please order separately) ​

    • Convenient: wireless probe, internal data storage and USB port for data export​

    • Versatile: Your testo 440 setup can be expanded with a large selection of digital probes

  • testo 440 delta P Air Flow ComboKit 1 with Bluetooth®

    Order-Nr. 0563 4409

    Carry out measurements without any annoying cables: use the kit to handle all relevant measurements in ventilation ducts and at air/ceiling outlets. You will receive the testo 440 dP air velocity and IAQ measuring instrument including differential pressure sensor and the 100 mm vane probe head and hot wire probe head (Ø 9 mm) for attachment to the universal Bluetooth handle supplied.  To make measurements more convenient, both probe heads can be combined with the telescope included in the kit. The equipment can be transported safely and conveniently in the robust case.

    • Intuitive: clearly structured measurement menu for volume flow and parallel determination of air velocity, differential pressure, humidity and temperature in ventilation ducts or at ventilation outlets​

    • Smart: simply combine the universal Bluetooth handle with the 100 mm vane or hot wire probe head and the extendable telescope (1.0 m)​

    • Convenient: wireless probes, internal data storage and USB port for data export

    • Versatile: the testo 440 has an integrated differential pressure sensor and can be expanded with a large portfolio of digital probes

  • testo 440 delta P Air Flow ComboKit 2 with Bluetooth®

    Order-Nr. 0563 4410

    Carry out measurements without any annoying cables: use the kit to handle all relevant measurements in ventilation ducts and at air/ceiling outlets. You will receive the testo 440 dP air velocity and IAQ measuring instrument including differential pressure sensor, two vane probe heads (Ø 100 mm and Ø 16 mm) and a humidity/temperature probe head – all three can be attached to the universal Bluetooth handle supplied. To make measurements more convenient, both vane probe heads can be combined with the telescope included in the kit. The equipment can be transported safely and conveniently in the robust case.

    • Intuitive: clearly structured measurement menu for volume flow and parallel determination of air velocity, differential pressure, humidity and temperature in ventilation ducts, at ventilation outlets

    • Smart: combine the universal Bluetooth handle with the humidity/temperature probe head or extendable telescope (1.0 m). Vane probe heads (Ø 16 mm, Ø 100 mm) can simply be plugged into the telescope

    • Convenient: wireless probes, internal data storage and USB port for data export

    • Versatile: testo 440 dP has an integrated differential pressure sensor and can be expanded with a large portfolio of digital probes

19 Products found