CxHy replacement sensor

0393 0300

CxHy replacement sensor

CxHy replacement sensor for flue gas measurement. A particularly practical feature: You can replace the sensor yourself – the precalibrated sensor is simply plugged into the appropriate flue gas analyzer.
The sensor is calibrated to methane ex-works. It can be calibrated to another gas by the user.

For the measurement of hydrocarbons (CH4 optimized)
Simply change sensor yourself on site
Pre-calibrated (adjusted to CH4 ex-works)

Methane (CH₄)

Methane (CH₄)	Measuring range 100 to 40000 ppm
Methane (CH₄)	Resolution 10 ppm

Propane (C₃H₈)

Propane (C₃H₈)	Measuring range 100 to 21000 ppm
Propane (C₃H₈)	Resolution 10 ppm

Butane (C₄H₁₀)

Butane (C₄H₁₀)	Measuring range 100 to 18000 ppm
Butane (C₄H₁₀)	Resolution 10 ppm

1 x CxHy replacement sensor.

Please note:

For one-off activation of the measurement parameter in the flue gas analyzer, you need the CxHy retrofit sensor. If the retrofit sensor has to be replaced, use the CxHy replacement sensor.

An O₂ content in the flue gas of a least 2% is needed for measurement with the sensor.

: 0632 3510

testo 350 - Analysis Box for exhaust gas analysis systems