Leakage test

The leak test (or more aptly, serviceability test, also known as leakage measurement) for the pipeline system is to be repeated every 12 years using a measuring instrument and recorded in a test results report. The operator thus has a technical expert report. Some buildings insurers include these inspections and certificates/reports in their general insurance terms. For the serviceability test or leakage measurement, the gas pipe is always tested in operating conditions/with operating pressure (no increased test pressure). During this test, a measuring instrument detects whether gas is leaking from the pipe and how much.

120 products or recommendations for Leakage test
  • testo 300 kit 1 with printer - Flue gas analyzer (O2, CO up to 4,000 ppm)

    Order-Nr. 0564 3002 71

    With this kit, you will be equipped for the most important measurements involving heating systems: the TÜV-tested testo 300 flue gas analyzer is supplied with O2 and CO sensor up to 4,000 ppm, basic flue gas probe, testo Bluetooth® printer, instrument case and practical accessories.
    • Fast and easy to operate: intuitive measurement menus and fast-response Smart-Touch display

    • Including O2 and CO sensor up to 4,000 ppm

    • Large 5-inch HD display – see all the system's measuring values at a glance

    • In the kit: testo 300 flue gas analyzer, including O2 and CO sensor up to 4,000 ppm, mains unit, basic flue gas probe, spare dirt filters, testo Bluetooth® printer, spare thermal paper, EasyHeat software, instrument case

  • testo 300 kit 1 - Flue gas analyzer (O2, CO up to 4,000 ppm)

    Order-Nr. 0564 3002 70

    With this kit, you will be equipped for the most important measurements involving heating systems: the TÜV-tested testo 300 flue gas analyzer is supplied with O2 and CO sensor up to 4,000 ppm, basic flue gas probe, instrument case and practical accessories.
    • Fast and easy to operate: intuitive measurement menus and fast-response Smart-Touch display

    • Including O2 and CO sensor up to 4,000 ppm

    • Large 5-inch HD display – see all the system's measuring values at a glance

    • In the kit: testo 300 flue gas analyzer, including O2 and CO sensor up to 4,000 ppm, mains unit, basic flue gas probe, spare dirt filters, EasyHeat software, instrument case

  • testo 300 kit 2 - flue gas analyzer (O2, CO H2-compensated up to 8,000 ppm)

    Order-Nr. 0564 3002 72

    With this kit, you will be equipped for the most important measurements involving heating systems: the TÜV-tested testo 300 flue gas analyzer is supplied with O2 and CO H2-compensated sensor up to 8,000 ppm, basic flue gas probe, instrument bag and practical accessories.
    • Fast and easy to operate: intuitive measurement menus and fast-response Smart-Touch display

    • Including O2, CO H2-compensated sensor up to 8,000 ppm

    • Large 5-inch HD display – see all the system's measuring values at a glance

    • In the kit: testo 300 flue gas analyzer, including O2 and CO H2-compensated sensor up to 8,000 ppm, mains unit, basic flue gas probe, spare dirt filters, EasyHeat software, instrument bag

  • testo 300 kit 2 with printer - flue gas analyzer (O2, CO H2-compensated up to 8,000 ppm)

    Order-Nr. 0564 3002 73

    With this kit, you will be equipped for the most important measurements involving heating systems: the TÜV-tested testo 300 flue gas analyzer is supplied with O2 and CO H2-compensated sensor up to 8,000 ppm, basic flue gas probe, Bluetooth® printer, instrument bag and practical accessories.
    • Fast and easy to operate: intuitive measurement menus and fast-response Smart-Touch display

    • Including O2, CO H2-compensated sensor up to 8,000 ppm

    • Large 5-inch HD display – see all the system's measuring values at a glance

    • In the kit: testo 300 flue gas analyzer, including O2 and CO H2-compensated sensor up to 8,000 ppm, mains unit, basic flue gas probe, spare dirt filters, Bluetooth® printer, EasyHeat software, instrument bag

  • testo 300 Longlife kit 1 - Flue gas analyzer (O2, CO up to 4,000 ppm, NO - can be retrofitted)

    Order-Nr. 0564 3004 70

    Carry out installation and maintenance work on heating systems several times a day using the flue gas analyzer with Longlife sensors. The TÜV-tested testo 300 Longlife flue gas analyzer is supplied with O2 and CO sensor up to 4,000 ppm (NO - can be retrofitted), basic flue gas probe, case and practical accessories.
    • Intuitive, smart, efficient: intuitive measurement menus, fast-response Smart-Touch operation, on-site documentation, e-mailing of reports

    • Including O2 and CO sensor up to 4,000 ppm (NO sensor - can be retrofitted)

    • High-quality sensor technology with up to 6 years' service life

    • In the kit: testo 300 Longlife flue gas analyzer, including O2 and CO sensor up to 4,000 ppm, mains unit, basic flue gas probe, spare dirt filters, EasyHeat software, case

  • testo 300 Longlife kit 1 with printer - Flue gas analyzer (O2, CO up to 4,000 ppm, NO - can be retrofitted)

    Order-Nr. 0564 3004 71

    Carry out installation and maintenance work on heating systems several times a day using the flue gas analyzer with Longlife sensors. The TÜV-tested testo 300 Longlife flue gas analyzer is supplied with O2 and CO sensor up to 4,000 ppm (NO - can be retrofitted), basic flue gas probe, testo Bluetooth® printer, case and practical accessories.
    • Intuitive, smart, efficient: intuitive measurement menus, fast-response Smart-Touch operation, on-site documentation, e-mailing of reports

    • Including O2 and CO sensor up to 4,000 ppm (NO sensor - can be retrofitted)

    • High-quality sensor technology with up to 6 years' service life

    • In the kit: testo 300 Longlife flue gas analyzer, including O2 and CO sensor up to 4,000 ppm, mains unit, basic flue gas probe, spare dirt filters, testo Bluetooth® printer, spare thermal paper, EasyHeat software, case

  • testo 300 Longlife kit 3 - flue gas analyzer (O2, CO H2-compensated up to 8,000 ppm, NO - can be retrofitted)

    Order-Nr. 0564 3004 72

    Carry out installation and maintenance work on heating systems several times a day using the flue gas analyzer with Longlife sensors. The TÜV-tested testo 300 Longlife flue gas analyzer is supplied with O2 and CO H2-compensated sensor up to 8,000 ppm (NO - can be retrofitted), TÜV-tested modular flue gas probe, case and practical accessories.
    • Intuitive, smart, efficient: intuitive measurement menus, fast-response Smart-Touch operation, on-site documentation, e-mailing of reports

    • Including O2, CO H2-compensated sensor up to 8,000 ppm (NO sensor - can be retrofitted)

    • High-quality sensor technology with up to 6 years' service life

    • In the kit: testo 300 Longlife flue gas analyzer, including O2 and CO H2-compensated sensor up to 8,000 ppm (NO - can be retrofitted), mains unit, modular flue gas probe, spare dirt filters, EasyHeat software, case

  • testo 300 Longlife kit 3 with printer - flue gas analyzer (O2, CO H2-compensated up to 8,000 ppm, NO - can be retrofitted)

    Order-Nr. 0564 3004 73

    Carry out installation and maintenance work on heating systems several times a day using the flue gas analyzer with Longlife sensors. The TÜV-tested testo 300 Longlife flue gas analyzer is supplied with O2 and CO H2-compensated sensor up to 8,000 ppm (NO - can be retrofitted), TÜV-tested modular flue gas probe, testo Bluetooth® printer, case and practical accessories.
    • Intuitive, smart, efficient: intuitive measurement menus, fast-response Smart-Touch operation, on-site documentation, e-mailing of reports

    • Including O2, CO H2-compensated sensor up to 8,000 ppm (NO sensor - can be retrofitted)

    • High-quality sensor technology with up to 6 years' service life

    • In the kit: testo 300 Longlife flue gas analyzer, including O2 and CO H2-compensated sensor up to 8,000 ppm (NO - can be retrofitted), mains unit, modular flue gas probe, spare dirt filters, testo Bluetooth® printer, spare thermal paper, EasyHeat software, case

  • testo 300 Longlife kit 4 - flue gas analyzer (O2, CO up to 15,000 ppm, NO - can be retrofitted)

    Order-Nr. 0564 3004 80

    Carry out installation and maintenance work on heating systems several times a day using the flue gas analyzer with Longlife sensors. The TÜV-tested testo 300 Longlife flue gas analyzer is supplied with O2 and CO sensor up to 15,000 ppm (NO - can be retrofitted), basic flue gas probe, case and practical accessories.
    • Intuitive, smart, efficient: intuitive measurement menus, fast-response Smart-Touch operation, on-site documentation, e-mailing of reports

    • Including O2, CO sensor up to 15,000 ppm (NO sensor - can be retrofitted)

    • High-quality sensor technology with up to 6 years' service life

    • In the kit: testo 300 Longlife flue gas analyzer, including O2 and CO sensor up to 15,000 ppm (NO - can be retrofitted), mains unit, basic flue gas probe, spare dirt filters, EasyHeat software, case

  • testo 300 Longlife kit 4 with printer - flue gas analyzer (O2, CO up to 15,000 ppm, NO - can be retrofitted)

    Order-Nr. 0564 3004 81

    Carry out installation and maintenance work on heating systems several times a day using the flue gas analyzer with Longlife sensors. The TÜV-tested testo 300 Longlife flue gas analyzer is supplied with O2 and CO sensor up to 15,000 ppm (NO - can be retrofitted), basic flue gas probe, testo Bluetooth® printer, case and practical accessories.
    • Intuitive, smart, efficient: intuitive measurement menus, fast-response Smart-Touch operation, on-site documentation, e-mailing of reports

    • Including O2, CO sensor up to 15,000 ppm (NO sensor - can be retrofitted)

    • High-quality sensor technology with up to 6 years' service life

    • In the kit: testo 300 Longlife flue gas analyzer, including O2 and CO sensor up to 15,000 ppm, mains unit, basic flue gas probe, spare dirt filters, testo Bluetooth® printer, EasyHeat software, case

  • testo 300 Longlife kit 2 - Flue gas analyzer (O2, CO H2-compensated up to 30,000 ppm, NO - can be retrofitted)

    Order-Nr. 0564 3004 82

    Carry out installation and maintenance work on heating systems several times a day using the flue gas analyzer with Longlife sensors. The TÜV-tested testo 300 Longlife flue gas analyzer is supplied with O2 and CO H2-compensated sensor up to 30,000 ppm (NO - can be retrofitted), TÜV-tested modular flue gas probe, case and practical accessories.
    • Intuitive, smart, efficient: intuitive measurement menus, fast-response Smart-Touch operation, on-site documentation, e-mailing of reports

    • Including O2, CO H2-compensated sensor up to 30,000 ppm (NO sensor - can be retrofitted)

    • High-quality sensor technology with up to 6 years' service life

    • In the kit: testo 300 Longlife flue gas analyzer, including O2 and CO H2-compensated sensor up to 30,000 ppm (NO - can be retrofitted), mains unit, modular flue gas probe, spare dirt filters, EasyHeat software, case

  • testo 316-2 - Gas leak detector

    Order-Nr. 0632 3162

    Speedy and sure gas leak detection. The testo 316-2 provides you with a quick and reliable means of detecting methane, propane and hydrogen in the surrounding air. The gas concentration is displayed in the form of an easy-to-read bar and an alarm is triggered when a threshold is crossed.
    • 18-step bar for displaying gas concentration; additional maximum leakage display

    • Quick reaction time with built-in pump

    • Flexible gooseneck sensor for checking hard-to-reach pipes and places

    • Rechargeable batteries for longer performance

  • testo 310 set with printer

    Order-Nr. 0563 3110

    testo 310 incl. battery and calibration protocol for the measurement of O2, CO, hPa and °C; IR printer (0554 3100); probe 180 mm with cone; case; mains unit incl. cable; silicon hose for pressure measurement; particle filter 5 off; 2 rolls spare thermal paper for printer.
    • Robust and light instrument for daily use

    • 30 seconds sensor zeroing

    • Integrated condensate trap

    • Integrated magnets for easy fixing to burner

  • testo 310 - Entry-level flue gas analyzer

    Order-Nr. 0563 3100

    Being a systems mechanic you know only too well how tough things can get when you’re working out in the field. That’s why your measuring tools need to be rugged and reliable. Like the testo 310 flue gas analyzer. Designed especially for use in the field.
    • Direct O2, CO, flue gas and ambient temperature measurements

    • Integrated measurement menu for flue gas, draft, CO ambient air and pressure

    • Quick sensor zero in only 30 seconds

    • Large, backlit digital display, rechargeable lithium battery with up to 10 hours life

  • testo 317-3 - CO meter for measuring CO in the surrounding air

    Order-Nr. 0632 3173

    Carbon monoxide is a killer. That’s why CO checks need to be carried out when a gas heating or boiler is being serviced or installed. The compact testo 317-3 CO meter is designed to provide you with a quick and reliable means of testing the surrounding air for carbon monoxide.
    • Ready to go: no zero phase

    • Alarm with adjustable thresholds

    • Carry case with belt clip and handstrap

    • 3-year CO sensor warranty

  • testo 316-1 - Gas leak detector

    Order-Nr. 0632 0316

    Speedy and sure detection of gas leaks in natural gas pipes. The testo 316-1 leak detector with two-stage visual alarm system is ideal for carrying out quick and reliable checks.
    • Speedy and sure leak detection in natural gas pipes

    • Audible and two-stage visual alarm that are triggered when a threshold is crossed

    • Flexible gooseneck sensor for hard-to-reach places

    • Tested by DVGW

  • testo 882 - Infrared camera

    Order-Nr. 0560 0882

    The testo 882 infrared camera is the most precise one-hand thermal imaging camera with pistol grip design from Testo. Special measuring modes including moisture image or high temperature option make it ideal for a wide variety of different applications.

    • Easy, one-handed operation for quick ‘n easy thermal imaging

    • Premium image quality: thermal image resolution 320 x 240 pixels, with optional SuperResolution Technology can be enhanced to 640 x 480 pixels

    • Precise measurements: thermal sensitivity < 50 mK, 32° lens, automatic hot/cold spot recognition

    • Built-in digital camera with power LEDs for real images with every thermal image

  • testo 317-2 - Gas leak detector for new users

    Order-Nr. 0632 3172

    Do you want to test quickly and efficiently whether there is a gas leak on gas pipe connections? Let the reliable testo 317-2 gas leak detector support you in your task. The handy gas detector for new users detects methane and propane.
    • Display of gas concentration via bar display

    • Self-test of sensor after switching on

    • Pitch of alarm rises along with gas concentration

    • Battery monitoring with optical display

  • Pro set testo 324 - Pressure and leakage measuring instrument

    Order-Nr. 0563 3240 71

    Everything the professional needs for testing gas pipes: in addition to the testo 324 leakage measuring instrument, including system case with feeding unit and other accessories, you get an infrared printer for measurement data documentation on site, along with the testo 316-2 gas leak detector.
    • All the important measurements in one instrument: tightness test, load test and serviceability test

    • Printer for documentation on site

    • Additional gas leak detector included in the scope of delivery

    • Automatic determination of pipe volume in gas pipes

  • testo 315-3 - CO and CO2 meter for ambient measurements

    Order-Nr. 0632 3153

    The high-quality testo 315-3 is an easy-to-use, ruggedly designed CO and CO2 meter that enables you to carry out quick and reliable ambient measurements according to DIN EN 50543 standard.
    • High-precision electrochemical CO sensor, shock resistant infrared CO2 sensor

    • Visual and audible alarm when thresholds are breached – adjustable thresholds

    • Rugged design

    • TÜV certified according to DIN EN 50543 standard

120 Products found
Show More