Temperature measurement

20 products or recommendations for Temperature measurement
  • testo Smart Probes VAC kit

    Order-Nr. 0563 0003 10

    For air-conditioning engineers: Compact kit containing four measuring instruments for your most important measuring tasks in, on and involving air conditioning systems. The testo Smart Probes App enables you to work more easily and efficiently: Use intuitive measurement menus for volume flow measurement, for automatic calculation of the dew point and wet bulb temperature or for detecting areas susceptible to mould according to the traffic light principle. Measurement data reports can be emailed directly as a PDF or Excel file.
    • Measurement of air and surface temperature, humidity, air velocity and volume flow

    • Measurement menus for volume flow measurement in ducts and at outlets, identification of mould risk, easy image documentation including IR temperature reading and measurement spot marking

    • Display measurement data as a graph or table and analyze and send via testo Smart Probes App

    • In conjunction with your smartphone/tablet, carry out the most important measurements involved in air conditioning systems

  • testo 480 - Digital temperature, humidity and air flow meter

    Order-Nr. 0563 4800

    Air flow measurements in ducts, temperature measurements in laboratories, humidity measurements in production, pressure difference measurements in clean rooms. The testo 480 digital temperature, humidity and air flow meter comes with a wide range of optional sensors that allow you to measure, analyse and log these and a variety of other parameters with only one device.
    • High-quality optional sensors for measuring air flow, temperature, humidity, pressure, degree of turbulence, heat radiation, CO2, illumination intensity, PMV/PPD and WBGT

    • High-precision, integrated pressure sensor included

    • Pro-software for easy and efficient analysis and logging included

    • Intelligent calibration concept

  • testo 435-4 - Multifunction indoor air quality meter

    Order-Nr. 0563 4354

    The testo 435-4 multifunction indoor air quality meter allows you to carry out all the measurements you need to inspect and adjust ventilation and air conditioning systems and to check the quality of the indoor air. There is also an integrated pressure difference sensor for pitot static tube measurements and filter monitoring and a wide range of optionally available sensors and probes to choose from.
    • Includes pressure difference sensor for pitot static tube measurements or filter monitoring

    • Further sensors optionally available (eg. anemometer, moisture sensors, lux and degree of turbulence sensors) for a variety of different measuring applications

    • Super-size memory for up to 10 000 measurements

    • PC software for analyzing and logging measuring data

  • testo 435-2 - Indoor air quality meter

    Order-Nr. 0563 4352

    The testo 435-2 indoor air quality meter allows you to carry out all the measurements that are necessary to check and adjust ventilation and air conditioning systems and assess the quality of the indoor air. Select from a wide range of probes and sensors. Because it’s you know best what your meter needs to be able to do!
    • Comprehensive range of measuring functions using optionally available accessories – e.g. anemometers, moisture sensors, lux and degree of turbulence sensors

    • Super-size memory for up to 10 000 readings

    • Displays dew point difference, min, max and mean values

    • PC software for analyzing and logging measuring data

  • testo 445 - climate measuring instrument

    Order-Nr. 0560 4450

    You can keep a close eye on indoor air quality with the testo 445 climate measuring instrument: the allrounder can measure up to 6 parameters (with the appropriate probe), which can help you make a professional assessment of indoor air quality. The climate measuring instrument therefore supports you in adjusting and checking ventilation and air conditioning systems.
    • Multi-function climate measuring instrument: measure up to 6 measurement parameters at the same time

    • Internal reading memory for up to 3,000 readings

    • Automatic allocation of the duct cross-section to the measuring location (max. 99 measuring locations)

    • Automatic mean value calculation and determination of the volume flow

  • testo 435-1 - Multi-function climate measuring instrument

    Order-Nr. 0560 4351

    testo 435 is a series of multi-function climate measuring instruments made by Testo. The testo 435-1 version is the entry-level measuring instrument in this series. You can use this to carry out measurements which you need to adjust ventilation and air conditioning systems and assess air quality. For this we offer you a comprehensive range of optional probes and sensors to choose from.
    • You have the option of connecting thermal anemometers and vane anemometers for measuring air velocity and volumetric flow in ventilation ducts

    • Air quality: measurement of CO2, air humidity, air temperature and absolute pressure with the optional IAQ probe

    • Display of dew point distance, min., max. and mean values

    • Illuminated display

  • testo 835-H1 - Infrared thermometer plus moisture measuring

    Order-Nr. 0560 8353

    Non-contact temperature and moisture measurements – with only one device. The testo 835-H1 infrared thermometer not only measures the temperature but has an intergrated moisture sensor that allows you to measure moisture too.
    • Measure temperature, moisture and dew point with only one device

    • Calculate the surface moisture content

    • Easy and comfortable to use: easy-to-follow menu guide, can save up to 200 readings, data analysis with free-to-download software

    • Four-Point-Laser and 50:1 Optics for precise measurements even over long distances

  • Humidity/temperature probe (Ø 12 mm)

    Order-Nr. 0636 9735

    The ideal probe for measuring the humidity and temperature of the air in storage, refrigerated and work areas, as well as in air conditioning/ventilation ducts. Also suitable for long-term measurements.
    • Humidity sensor with long-term stability

    • Temperature measuring range: -20 to +70 °C

  • Hot wire probe (Ø 12 mm) - for flow, temperature and humidity

    Order-Nr. 0635 1535

    The hot wire probe (in conjunction with the appropriate measuring instrument) is ideal for determining flow velocity as well as temperature and humidity in ventilation ducts or at ventilation outlets.
    • 3 functions in 1 probe: measurement of flow, temperature and humidity

    • Probe head diameter: 12 mm – also suitable for measurements in ventilation ducts

    • With telescope (can be extended to 745 mm)

    • Flow measuring range: 0 to +20 m/s

  • High-precision humidity/temperature probe (Ø 12 mm)

    Order-Nr. 0636 9743

    Measure humidity with ultra-precision: using the high-quality digital humidity and temperature probe (Ø 12 mm). Suitable for use in storage, refrigerated or work areas, as well as in air conditioning/ventilation ducts.
    • High-precision humidity measurement: accuracy of up to ±1% RH

    • Intelligent calibration concept

    • Temperature measuring range: -20 to +70 °C

  • Hot wire probe (Ø 10 mm) - for flow, temperature, humidity and pressure

    Order-Nr. 0635 1543

    The hot wire probe (in conjunction with the appropriate measuring instrument) is ideal for determining flow velocity as well as temperature, humidity and pressure in ventilation ducts or at wall or ceiling outlets.
    • 4 functions in 1 probe: measurement of flow, temperature, humidity and absolute pressure

    • With robust, non-rotatable telescope (can be extended to 1100 mm)

    • Intelligent calibration concept

    • Flow measuring range: 0 to +20 m/s

  • Robust humidity probe

    Order-Nr. 0636 2161

    In combination with the testo 635, the robust humidity probe measures the humidity and temperature of the air. Because the probe can be used up to 125 °C, it also enables measurements in air exhaust ducts. In addition, it is suitable for measuring the material equilibrium moisture content, for example in bulk materials.
    • Probe for relative humidity and air temperature measurements

    • Measurements of the material equilibrium moisture content possible

    • Temperature measuring range: -20 to +125 °C (briefly up to +140 °C)

  • Compact professional humidity module

    Order-Nr. 0636 9736

    The humidity module can be attached to various Testo radio handles. It enables a high level of accuracy thanks to the precise humidity sensor.

    Wireless handle (0554 0189) and wireless module (0554 0188) are required to use a radio probe, and these can be ordered optionally.
    • For wireless humidity and temperature measurements

    • Can be attached to different Testo radio handles (available to order separately)

    • High precision in humidity measurement

    • Temperature measuring range: -20 to +70 °C

  • High-precision humidity/temperature probe (Ø 21 mm)

    Order-Nr. 0636 9741

    The high-precision humidity/temperature probe means you can check ambient conditions in production and also climatic conditions in clean rooms with a high level of accuracy.
    • High-precision humidity measurement: accuracy of up to ±1% RH

    • Probe shaft diameter of 21 mm: Use with different sintered caps possible

    • Can be used in the high humidity range

    • Temperature measuring range: -20 to +70 °C

  • Standard humidity/temperature probe (Ø 21 mm)

    Order-Nr. 0636 9740

    The standard humidity/temperature probe means you can check the indoor air climate quickly and reliably.
    • Probe shaft diameter of 21 mm

    • Fast response time for air temperature measurement

    • Temperature measuring range: -20 to +70 °C

  • Thin humidity probe (Ø 4 mm) - for material moisture

    Order-Nr. 0636 2135

    The slim humidity probe measures material moisture via the equilibrium moisture content and can very easily be used in recesses or bore holes thanks to its slim design and remote electronics. The material moisture can also be determined directly in the instrument in combination with the testo 635 temperature and humidity measuring instrument.

     
    • Measurement of the material moisture via the equilibrium moisture content

    • Slim design (Ø 4 mm) with remote electronics – ideal for tight measuring points

  • Robust humidity probe for temperatures of up to +180 °C

    Order-Nr. 0636 9753

    This robust humidity probe can be used for the simultaneous measurement of temperature and relative humidity. The probe's wide temperature range of up to +180 °C means that you can measure the moisture content in industrial exhaust air, for example.
    • Robust humidity probe measures temperature and relative humidity

    • Measurements are possible up to +180 °C, for example in industrial exhaust air or in air-conditioning cabinets

    • Automatic calculation of absolute humidity, dew point, wet bulb temperature and enthalpy

    • Zero-error display thanks to an intelligent calibration concept

  • Hot ball probe (Ø 7.5 mm) - for flow, temperature and humidity

    Order-Nr. 0635 1540

    The hot ball probe (in conjunction with the appropriate measuring instrument) is ideal for determining flow velocity as well as temperature and humidity in ventilation ducts.
    • 3 functions in 1 probe: measurement of flow, temperature and humidity

    • Measures temperatures up to +70 °C

    • Flow measuring range: 0 to +10 m/s 

  • Humidity module for testo 625 and radio handles

    Order-Nr. 0636 9725

    Humidity module for attachment to the testo 625 thermohygrometer and Testo radio handles.
    • Can be attached to the testo 625 thermohygrometer and Testo radio handles (both available to order separately)

    • For wireless humidity measurements (with radio handle)

    • Temperature measuring range: -10 to +60 °C

20 Products found