Flue gas, gas and particle

The worldwide uninterrupted pollution of the atmosphere and more and more rules and regulations mean that flue gas analysis and emission control is becoming more and more important. It serves to reduce pollutant emission from combustion systems and it meets the objective of using energy as efficiently as possible.

34 products or recommendations for Flue gas
  • testo 350 - Analysis Box for exhaust gas analysis systems

    Order-Nr. 0632 3510

    The testo 350 is a rugged, easy-to-use exhaust gas analyzer designed to meet the highest demands when it comes to carrying out precise industrial emission measurements and providing proper data administration. The Analysis Box can be operated with up to 6 gas sensors, 5 of which are optional. This allows you to select freely from sensors for CO, NO, NO2, SO2, H2S, CxHy and CO2.
    • Increased measurement range for unlimited measurements even when gas concentrations are higher

    • Easy-to-change gas sensors and easy access to wearing parts

    • Sealed housing with built-in impact protection for use in harsh conditions

    • Easy operation of the analyzer unit via Control Unit or easyEmission software (both products available separately) 

  • testo 340 - Flue gas analyzer for use in industry

    Order-Nr. 0632 3340

    Emission control in industry: the testo 340 flue gas analyzer gives you professional technology, easy handling and practical execution in one instrument. The high-performance testo 340 flue gas analyzer is fitted with an O2 sensor and can be equipped with up to 3 additional sensors.
    • Can measure CO, COlow, NO, NOlow, NO2 or SO2

    • Extended measuring range for use in environments with high gas concentrations

    • Precalibrated gas sensors for quick and easy sensor change

    • Integrated pressure difference and air flow measurements for mass flow calculations

  • testo 350 - Control Unit for exhaust gas analysis systems

    Order-Nr. 0632 3511

    The testo 350 flue gas analyzer fulfils the highest requirements in industrial emission measurement: easy handling, accurate measuring technology and robust design are practical features which impress on a daily basis. The Control Unit is the supplement to the testo 350 analyzer unit (please order separately) – it enables you to control emission measurement.
    • testo 350 Analysis Box just as easy to use when not positioned at measurement site

    • Internal memory for receiving measurement data from the Analysis Box

    • Large graphic color display, robust, industrial-type housing

    • User-friendly application-specific menu guide

  • Pro set testo 324 - Pressure and leakage measuring instrument

    Order-Nr. 0563 3240 71

    Everything the professional needs for testing gas pipes: in addition to the testo 324 leakage measuring instrument, including system case with feeding unit and other accessories, you get an infrared printer for measurement data documentation on site, along with the testo 316-2 gas leak detector.
    • All the important measurements in one instrument: tightness test, load test and serviceability test

    • Printer for documentation on site

    • Additional gas leak detector included in the scope of delivery

    • Automatic determination of pipe volume in gas pipes

  • testo 380 - Particle counter

    Order-Nr. 0632 3800

    As a chimney sweep, heating engineer or service technician you are required by law to abide to the rules and regulations (like the 1. BlmSchV – Ord. 1 of the Federal Immission Control Ordinance) which apply to your field and profession. You can rely on the testo 380 to help you to carry out your daily tasks because it is certified for use with solid, liquid and gaseous fuels as well as for the threshold values 1 and 2 according to 1. BlmSchV. The easy-to-use particle counter can take you through the preprogrammed measuring programm of the BlmSchV and save you heaps of time and hassle.
    • Carry out parallel fine particle, O2 and CO measurements in real time

    • Ideal for chimney sweeps and system technicians; easy-to-follow, step-by-step guide for carrying out measurements according to 1. BlmSchV

    • Large, graphic colour display, easy to use, low running and maintenance costs

    • Certified for use with solid, liquid and gaseous fuels as well as for the threshold values 1 and 2 according to 1. BlmSchV

  • Basic set testo 312-4

    Order-Nr. 0563 1327

    testo 312-4 differential pressure gauge
    testo 312-4 hose set
    balloon pump with release screw
    conical test plug 1/2
    conical test plug 3/4
    testo fast printer
    pressure set for gas pressure measurements in heating systems
    system case
  • testo 324 - Pressure/gas leak detector

    Order-Nr. 0632 3240

    Professional pressure/leak detector for installation, maintenance and service of gas and water pipes. Specially designed to carry out reliable leak tightness checks, load tests, serviceability tests, temperature measurements in accordance with existing rules and regulations.
    • Easy to set up, easy to use due to legally compliant measuring menus (i.e. according to TRGI 2008)

    • Extremely accurate and DVGW-compliant measuring results

    • Leak tightness checks of gas pipes according to TRGI 2008 and liquid gas pipes according to TRF 2012

    • Easy to use due to automatic pressure build-up; quick and easy data storage

  • testo 312-4 - Differential pressure measuring instrument

    Order-Nr. 0632 0327

    You can carry out all the necessary tests on gas heating systems as well as water and gas pipes with the testo 312-4 electronic differential pressure measuring instrument. Preset measuring processes, for example for load and tightness tests as well as serviceability testing on gas pipes, provide you with ideal support for your work.
    • Tightness testing and load testing on gas pipes

    • Serviceability testing with air by pressure drop on gas pipes

    • Pressure testing on drinking water and waste water pipes using air

    • Automatic recording of measuring values over several hours

  • High-pressure set testo 312-4

    Order-Nr. 0563 1328

    testo 312-4 differential pressure gauge
    testo 312-4 hose set
    balloon pump with release screw
    conical test plug 1/2
    conical test plug 3/4
    testo fast printer
    pressure set for gas pressure measurements on heating systems
    high-pressure plug 3/8 und 3/4
    high-pressue plug 1/2 and 1
    high-pressure probe 1up to 25 bar
    system case
  • testo 338 - Smoke tester

    Order-Nr. 0632 3382

    For diesel engines, the smoke count is an important parameter, not only for evaluating emissions, but also for the correct adjustment of the fuel injection. With the smoke tester testo 338, the determination of degree of blackening is revolutionarily easy; no stationary measurement equipment, no analysis electronics – with just one portable one-hand measuring instrument.
    • Handy and robust: easily possible to carry to the desired application site

    • Determination of soot concentration (mg/m3) as well as Filter Smoke Number (FSN) or Bosch number

    • Easy one-handed operation

    • Direct analysis and display of measurement values, optional on-site printout of data with Testo fast printer

  • testo 338 - Smoke tester

    Order-Nr. 0632 3381

    For diesel engines, the smoke count is an important parameter, not only for evaluating emissions, but also for the correct adjustment of the fuel injection. With the smoke tester testo 338, the determination of degree of blackening is revolutionarily easy; no stationary measurement equipment, no analysis electronics – with just one portable one-hand measuring instrument.
    • Handy and robust Easily possible to carry to the desired application site

    • Determination of soot concentration (mg/m3) as well as Filter Smoke Number (FSN) or Bosch number

    • Easy one-handed operation

    • Direct analysis and display of measurement values, optional on-site printout of data with Testo fast printer

  • Modular flue gas probe, 335 mm, Ø 8 mm, Tmax 1000 °C

    Order-Nr. 0600 8764

    The modular flue gas probe with 335 mm long probe shaft including integrated thermocouple up to 1000 °C and quick-change click system (for quick replacement of the probe shaft).
    • Easy probe shaft replacement via quick-change click system

    • NO2/SO2 special hose (length: 2.2 m)

    • Flue gas path and temperature channel can be connected to the instrument via a bayonet lock

    • Integrated thermocouple probe for temperature measurements up to 1000 °C

  • Industrial probe kit 1200°C

    Order-Nr. 0600 7610

    Ideal for the extractive sampling of flue gas at high flue gas temperatures. The industrial probe kit 1200°C comprises a handle, a probe shaft up to 1200°C flue gas temperature, a 4 m long gas sampling hose, including inline filter (all three unheated) and a thermocouple type K.
    • Can be used in combination with testo 340 and testo 350

    • Additional inline filter to protect the gas sampling hose from contamination

    • Unheated sampling tube (1 200 °C) can be extended up to max. 3 m using optional extension tubes

    • Very easy to handle

  • Modular flue gas probe, 335 mm, Ø 8 mm, Tmax 500 °C

    Order-Nr. 0600 9766

    The modular flue gas probe with 335 mm long probe shaft including integrated thermocouple up to 500 °C and quick-change click system (for quick replacement of the probe shaft).
    • Easy probe shaft replacement via quick-change click system

    • NO2/SO2 special hose (length: 2.2 m)

    • Flue gas path and temperature channel can be connected to the instrument via a bayonet lock

    • Integrated thermocouple probe for temperature measurements up to 500 °C

  • Modular flue gas probe, 700 mm, Ø 8 mm, Tmax 500 °C

    Order-Nr. 0600 9767

    The modular flue gas probe with 700 mm long probe shaft including integrated thermocouple up to 500 °C and quick-change click system (for quick replacement of the probe shaft).
    • Easy probe shaft replacement via quick-change click system

    • NO2/SO2 special hose (length: 2.2 m)

    • Flue gas path and temperature channel can be connected to the instrument via a bayonet lock

    • Integrated thermocouple probe for temperature measurements up to 500 °C

  • Modular flue gas probe 700 mm, Ø 8 mm, Tmax 1000 °C

    Order-Nr. 0600 8765

    The modular flue gas probe with 700 mm long probe shaft including integrated thermocouple up to 1000 °C and quick-change click system (for quick replacement of the probe shaft).
    • Easy probe shaft replacement via quick-change click system

    • NO2/SO2 special hose (length: 2.2 m)

    • Flue gas path and temperature channel can be connected to the instrument via a bayonet lock

    • Integrated thermocouple probe for temperature measurements up to 1000 °C

  • Modular flue gas probe with pre-filter, Ø 14 mm, 700 mm, Tmax 1000°C

    Order-Nr. 0600 8767

    The modular flue gas probe with preliminary filter Ø 14 mm, 700 mm long probe shaft, thermocouple up to 1000 °C and quick-change click system (for quick probe shaft replacement).
    • Easy probe shaft replacement via quick-change click system

    • Preliminary filter offers protection from dusty flue gases

    • Flue gas path and temperature channel can be connected to the instrument via a bayonet lock

    • Integrated thermocouple probe for temperature measurements up to 1000 °C

  • Flue gas probe for industrial engines

    Order-Nr. 0600 7555

    The flue gas probe from Testo can be used to carry out efficient and reliable flue gas measurements on stationary industrial engines. It can be used at flue gas temperatures of up to 1,000 °C.
    • Additional particle filter in the hose provides protection from contamination

    • Probe shaft is easy to replace

    • Made of metal: no melting of the handle due to radiated heat from the flue gas duct

    • Temperature measurement possible with optional thermocouple

  • Stainless steel Pitot tube, length 750 mm - for measuring flow velocity, including temperature measurement

    Order-Nr. 0635 2042

    Robust Pitot tube for measuring flow velocity: the Pitot tube provides the optimum conditions, especially for higher flow velocities and for heavily contaminated flow. The 750 mm long Pitot tube has integrated temperature measurement and a connection hose with a maximum load capacity of up to 700 hPa (mbar).
    • For measuring flow velocity

    • Ideal for high flow velocities and heavily contaminated flow

  • Modular flue gas probe with pre-filter, 335 mm, Ø 14 mm, Tmax 1000°C

    Order-Nr. 0600 8766

    The modular flue gas probe with preliminary filter Ø 14 mm, 335 mm long probe shaft, thermocouple up to 1000 °C and quick-change click system (for quick probe shaft replacement).
    • Easy probe shaft replacement via quick-change click system

    • Preliminary filter offers protection from dusty flue gases

    • Flue gas path and temperature channel can be connected to the instrument via a bayonet lock

    • Integrated thermocouple probe for temperature measurements up to 1000 °C

34 Products found
Show More