Absolute pressure

Alongside temperature, the physical measurement parameter of pressure is one of the most important and most measured parameters for applications in research and engineering. A large number of measuring tasks have become indispensable for a wide range of applications in heating, sanitation and air-conditioning sectors, in process engineering and in many other areas.

12 products or recommendations for Absolute pressure
  • testo 480 - Digital temperature, humidity and air flow meter

    Order-Nr. 0563 4800

    Air flow measurements in ducts, temperature measurements in laboratories, humidity measurements in production, pressure difference measurements in clean rooms. The testo 480 digital temperature, humidity and air flow meter comes with a wide range of optional sensors that allow you to measure, analyse and log these and a variety of other parameters with only one device.
    • High-quality optional sensors for measuring air flow, temperature, humidity, pressure, degree of turbulence, heat radiation, CO2, illumination intensity, PMV/PPD and WBGT

    • High-precision, integrated pressure sensor included

    • Pro-software for easy and efficient analysis and logging included

    • Intelligent calibration concept

  • testo 622 - Thermo hygrometer and barometer

    Order-Nr. 0560 6220

    The testo 622 thermo hygrometer and barometer is designed to provide you with an at-a-glance look at the air temperature, relative humidity and air pressure. Ideal for monitoring the ambient air, especially in laboratories during calibration or when running experimental setups.
    • Measures air temperature, relative humidity and pressure

    • Ideal for monitoring the ambient air especially in laboratories

    • Alarm alerts when threshold is exceeded

    • Table or wall mount

  • testo 435-4 - Multifunction indoor air quality meter

    Order-Nr. 0563 4354

    The testo 435-4 multifunction indoor air quality meter allows you to carry out all the measurements you need to inspect and adjust ventilation and air conditioning systems and to check the quality of the indoor air. There is also an integrated pressure difference sensor for pitot static tube measurements and filter monitoring and a wide range of optionally available sensors and probes to choose from.
    • Includes pressure difference sensor for pitot static tube measurements or filter monitoring

    • Further sensors optionally available (eg. anemometer, moisture sensors, lux and degree of turbulence sensors) for a variety of different measuring applications

    • Super-size memory for up to 10 000 measurements

    • PC software for analyzing and logging measuring data

  • testo 435-2 - Indoor air quality meter

    Order-Nr. 0563 4352

    The testo 435-2 indoor air quality meter allows you to carry out all the measurements that are necessary to check and adjust ventilation and air conditioning systems and assess the quality of the indoor air. Select from a wide range of probes and sensors. Because it’s you know best what your meter needs to be able to do!
    • Comprehensive range of measuring functions using optionally available accessories – e.g. anemometers, moisture sensors, lux and degree of turbulence sensors

    • Super-size memory for up to 10 000 readings

    • Displays dew point difference, min, max and mean values

    • PC software for analyzing and logging measuring data

  • testo 635-2 - Temperature and moisture meter

    Order-Nr. 0563 6352

    The testo 635-2 temperature and moisture meter allows you to carry out temperature and moisture measurements on a variety of different materials, surfaces and environments. This is made possible due to leading-edge technology and a wide selection of optionally available sensors.
    • Optionally available sensors for moisture, temperature, pressure dew point and absolute pressure measurements

    • 2 plug-in sensors and 3 wireless sensors can be connected

    • Super-size memory for up to 10 000 readings

    • USB cable and PC software for archiving and logging measuring data included

  • testo 635-1 - temperature and humidity measuring instrument

    Order-Nr. 0560 6351

    The testo 635-1 temperature and humidity measuring instrument enables you to measure the temperature, air humidity and dew point – in compressed air as well. State-of-the-art technology and a large selection of probes, which are available as an option, enable this wide variety of measuring possibilities.
    • Probes available as an option mean you can measure air humidity, temperature, absolute pressure and dew point in compressed air

    • Two plug-in probes and 3 radio probes can be attached

    • Calculates dew point and dew point distance

    • Display of min., max. and mean values

  • testo 445 - climate measuring instrument

    Order-Nr. 0560 4450

    You can keep a close eye on indoor air quality with the testo 445 climate measuring instrument: the allrounder can measure up to 6 parameters (with the appropriate probe), which can help you make a professional assessment of indoor air quality. The climate measuring instrument therefore supports you in adjusting and checking ventilation and air conditioning systems.
    • Multi-function climate measuring instrument: measure up to 6 measurement parameters at the same time

    • Internal reading memory for up to 3,000 readings

    • Automatic allocation of the duct cross-section to the measuring location (max. 99 measuring locations)

    • Automatic mean value calculation and determination of the volume flow

  • testo 435-1 - Multi-function climate measuring instrument

    Order-Nr. 0560 4351

    testo 435 is a series of multi-function climate measuring instruments made by Testo. The testo 435-1 version is the entry-level measuring instrument in this series. You can use this to carry out measurements which you need to adjust ventilation and air conditioning systems and assess air quality. For this we offer you a comprehensive range of optional probes and sensors to choose from.
    • You have the option of connecting thermal anemometers and vane anemometers for measuring air velocity and volumetric flow in ventilation ducts

    • Air quality: measurement of CO2, air humidity, air temperature and absolute pressure with the optional IAQ probe

    • Display of dew point distance, min., max. and mean values

    • Illuminated display

  • testo 435-3 - Multi-function climate measuring instrument

    Order-Nr. 0560 4353

    testo 435-3 – multi-function climate measuring instrument with integrated differential pressure measurement. You can use this to carry out measurements which you need to adjust ventilation and air conditioning systems and assess room air quality. For this we offer a comprehensive range of optional probes and sensors to choose from.
    • Includes differential pressure measurement for filter monitoring or for measurement with a Pitot tube

    • Further optional probes can be attached: thermal and vane anemometers, along with probes for air humidity, CO2, absolute pressure and temperature

    • Display of dew point distance, min., max. and mean values

    • Illuminated display

  • testo 635-2 U-value promo set - thermohygrometer set

    Order-Nr. 0563 6353

    The U-value is the most important value for proving the heat loss of a building. With the testo 635-2 thermohygrometer and compatible accessories from the U-value set, determining the U-value is now easier than ever.
    • Evaluate renovation measures quickly and flawlessly

    • Easy probe attachment, even in inaccessible places

    • Proof of service thanks to report creation 

    • Integrated memory and easy evaluation with PC software

  • Comfort probe for turbulence measurement

    Order-Nr. 0628 0143

    The comfort probe (with the appropriate measuring instrument) is ideally suited for determining indoor air turbulence in accordance with EN 13779.
    • Turbulence measurement in accordance with EN 13779

    • Determination of air velocity and draught risk

    • Integrated temperature and ambient pressure measurement

    • Intelligent calibration concept

  • testo 160 IAQ - WiFi data logger with display and integrated sensors for temperature, humidity, CO2 and atmospheric pressure

    Order-Nr. 0572 2014

    If there are a lot of people in a room, the air quality deteriorates. Reliable monitoring is particularly important, because indoor air quality is linked to our well-being. The WiFi data logger testo 160 IAQ is ideal for monitoring indoor air quality in facility management.
     
    • Ideal for monitoring indoor air quality (IAQ)

    • Blends in perfectly with the surroundings thanks to an optional, customizable deco-cover

    • Simple to install, integrate and operate – particularly user-friendly with air quality displayed in the form of a traffic light system

    • Perfectly networked: data storage in the Testo Cloud, real-time alarm via email or SMS (optional in conjunction with an Advanced licence)

12 Products found