Flue gas analyser

The Testo flue gas analysers measure, analyse and document whether flue gas values are adhered. Irrespective of whether you carry out spot or long-term measurements, we offer a comprehensive range of gas sensors for the analysis of flue gases. Our flue gas analysers help you with optimum flue gas analysis, exhaust gas measurement and the subsequent setting of your production plants - be it a furnace, boiler, gas turbine, engine or also an incinerator.

107 Products found
  • testo 350 - Analysis Box for exhaust gas analysis systems

    Order-Nr. 0632 3510

    The testo 350 is a rugged, easy-to-use exhaust gas analyzer designed to meet the highest demands when it comes to carrying out precise industrial emission measurements and providing proper data administration. The Analysis Box can be operated with up to 6 gas sensors, 5 of which are optional. This allows you to select freely from sensors for CO, NO, NO2, SO2, H2S, CxHy and CO2.

    • Increased measurement range for unlimited measurements even when gas concentrations are higher

    • Easy-to-change gas sensors and easy access to wearing parts

    • Sealed housing with built-in impact protection for use in harsh conditions

    • Automatic processing of measuring programmes over a longer period

    Price on Request
  • testo 340 - Flue gas analyzer for industry emission measurement

    Order-Nr. 0632 3340

    Emission checks in industry are easy with the flue gas analyzer testo 340. Professional technology meets practical design. The testo 340 flue gas analyzer is easy-to-use for emission measurement in industries. It can be fitted with up to four different gas sensors.

    • Can measure CO, COlow, NO, NOlow, NO2 or SO2

    • Extended measuring range for use in environments with high gas concentrations

    • Precalibrated gas sensors for quick and easy sensor change

    • Integrated pressure difference and air flow measurements for mass flow calculations

    Price on Request
  • testo 330i advanced set - flue gas analyzer set

    Order-Nr. 0563 3000 71

    The testo 330i flue gas analyzer advanced set will enable you to overcome all the challenges that crop up when commissioning and servicing heating systems. The testo 330i advanced set contains the flue gas analyzer, a flue gas probe and a temperature probe, along with practical accessories.

    • Operation independent of measuring location and display of readings via smartphone or tablet and the testo 330i App

    • Paperless documentation and report creation on site with the testo 330i App

    • Reliable attachment of the flue gas probe with the testoFix probe holder

    • Robust, completely enclosed plastic housing for use in harsh environments

  • testo 350 - Control Unit for exhaust gas analyzer

    Order-Nr. 0632 3511

    Testo 350 Control Unit is a rugged, easy-to-use exhaust gas analyzer designed to meet the highest demands when it comes to carrying out precise industrial emission measurements and providing proper data administration. The Control Unit complements the testo 350 Analysis Box (separate product) for emission measurements.

    • User-friendly application-specific menu guide

    • testo 350 Analysis Box can be remote controlled by the Control Unit even if  not positioned at measurement site

    • Internal memory for receiving measurement data from the Analysis Box

    • Large graphic colour display, robust, industrial-type housing

    Price on Request
  • testo 320 basic - Flue gas analyzer

    Order-Nr. 0632 3223

    Flue gas measurement on heating systems with a basic flue gas analyzer for oil and gas: the testo 320 basic features all the essential functions for carrying out flue gas analysis, flue draught and pressure measurements. The basic flue gas analyzer is impressive because it is easy to operate (featuring user-friendly menu guidance) and reliable (2-year warranty for the instrument, probe, O2/CO sensor).

    • Self-explanatory menu guidance with standardized measuring procedures for quick, easy handling

    • Sensors can be changed by the user

    • Easy to operate thanks to single-hose connection

    • TÜV-tested according to EN 50379 Part 1-3 and to 1st German Federal Immission Control Ordinance (BImSchV), Part 1-2

    Price on Request
  • testo 330i basic set - flue gas analyzer set

    Order-Nr. 0563 3000 70

    Everything you need to carry out efficient servicing and commissioning of heating systems using the testo 330i flue gas analyzer – in one compact set.

    • Operation independent of measuring location and display of readings via smartphone or tablet and the testo 330i App

    • Paperless documentation and report creation on site with the testo 330i App

    • Reliable attachment of the flue gas probe with the testoFix probe holder

    • Practical accessories, including probes and temperature probe

  • testo 320 - Super efficient flue gas analyzer

    Order-Nr. 0632 3220

    Temperature measurements at radiators; flue gas parameter and pressure measurements at burners; CO measurements in the ambient air: the testo 320 allows you to carry out all measurements in and around heating systems with only one measuring device.

    • Six applications, one device: flue gas, flue draft, pressure, gas leak detection, CO ambient air and pressure difference measurements

    • Integrated flue gas sensors with temperature sensor included; ultra-fine pressure sensors and a wide range of other sensors, ports and probes optional

    • Rugged, high-quality design, high-resolution, multi-color display, self-explanatory menu guide

    • TÜV-tested according to EN 50379, Parts 1-3 and 1st BImSchV

    Rs.  77,776.00
    Taxes & freight extra, probes & accessories additional
  • testo 350 MARITIME - Exhaust gas analyzer for diesel ship engines

    Order-Nr. 0563 3503

    Testo proudly presents the world’s first portable exhaust gas analyzer for diesel ship engines: the testo 350 MARITIME! The groundbreaking exhaust gas analyzer measures emissions at diesel ship engines in compliance with MARPOL Annex VI and NOx Technical Code 2008.

    • Measures O2, CO, NOx (NO + NO2 separate), SO2 – high precision and long-term stable

    • Certified gas sensors: equal to reference measurement

    • Ready to measure after only two minutes

    • Determination of the fuel sulphur content by means of SO2/CO2 ratio according to MEPC 184 (59)

    Price on Request
  • testo 310 - Entry-level Combustion analyzer

    Order-Nr. 0563 3100

    Being a systems mechanic you know only too well how tough things can get when you’re working out in the field. That’s why your measuring tools need to be rugged and reliable. Like the testo 310 combustion analyzer. Designed especially for use in the field. With this combustion analyzer, you can optimise the combustion process to save fuel and costs.

    • Direct O2, CO, flue gas and ambient temperature measurements

    • Integrated measurement menu for flue gas, draft, CO ambient airand pressure

    • Quick sensor zero in only 30 seconds

    • arge, backlit digital display, rechargeable lithium battery with up to 10 hours life

    Rs.  60,763.00
    Taxes & freight extra, probes & accessories additional
  • testo 310 set with printer

    Order-Nr. 0563 3110

    testo 310 incl. battery and calibration protocol for the measurement of O2, CO, hPa and °C; IR printer (0554 3100); probe 180 mm with cone; case; mains unit incl. cable; silicon hose for pressure measurement; particle filter 5 off; 2 rolls spare thermal paper for printer.

    • Robust and light instrument for daily use

    • 30 seconds sensor zeroing

    • Integrated condensate trap

    • Integrated magnets for easy fixing to burner

    Price on Request
  • testo 330-2 LL flue gas analyzer - Pro flue gas analysis kit

    Order-Nr. 0632 3307

    The intelligent professional analysis tool for all measurements in and around heating systems. The TÜV-tested testo 330-2 LL flue gas analyzer comes with a wide range of user-changeable, longlife sensors that last for up to six years. Saves you from having to buy an extra measuring device – and new sensors.

    • High-quality, longlife (up to six years) O2 and CO sensors; further sensors (i.e. NO sensor) optional

    • 4-year warranty on the flue gas analyzer

    • No need to withdraw the sensor from the flue to zero

    • CO measurements up to 30 000 ppm

    Rs.  160,655.00
    Taxes & freight extra, probes & accessories additional
  • testo 330i - flue gas analyzer (with H₂-compensated CO measuring cell)

    Order-Nr. 0632 3000 71

    Flue gas analysis with no stress, paper or shaky probes – the new testo 330i flue gas analyzer makes this possible. This instrument combines the proven measuring technology of its predecessor testo 330 LL with a revolutionary new method of operation.

    • Paperless documentation and report generation on site via smartphone app

    • Operation independent of measuring location via smartphone app

    • No more probe slippage thanks to the testoFix probe holder (optional)

    • Completely enclosed plastic housing – particularly robust

    Rs.  140,107.00
    Taxes & freight extra, probes & accessories additional
  • testo 330-2 LX anniversary set - Flue gas analyzer (O2, CO H2-compensated) in a system case

    Order-Nr. 0563 6034 70

    With this anniversary set you will be equipped to take the most important measurements relating to heating systems: The testo 330-2 LX flue gas analyzer tested and certified by the German Technical Safety Standards Authority (TÜV) is supplied with an O2 and CO H2-compensated sensor, TÜV tested and certified modular flue gas probe, system case, and other practical accessories.

    • 5-year warranty without a maintenance contract on O2 and CO sensors

    • Included in the anniversary set: TÜV tested and certified testo 330-2 LX flue gas analyzer, including O2 and CO H2-compensated sensor, Bluetooth® interface, mains unit, TÜV tested and certified modular flue gas probe, replacement dirt filter and system case

    • testo 330-2 LX flue gas analyzer with fresh air valve to protect the CO measuring cell and to extend the CO measuring range to 30,000 ppm

    • Single-hose connection: just one hand movement is needed to securely connect all the channels for flue gas measurement (gas paths, draught, temperature probe integrated into the flue gas probe)

  • testo 330-1 LX anniversary set - Flue gas analyzer (O2, CO) with printer in a system case

     

    Order-Nr. 0563 6033 71

    This anniversary set means you have the appropriate equipment ready to hand and can get down to work straight away: the set with testo 330-1 LX flue gas analyzer, basic flue gas probe, testo fast printer, system case and practical accessories is ideal for customer service and maintenance engineers.

     

    • 5-year warranty without maintenance contract on O2 and CO sensors

    • Included in the anniversary set: TÜV-tested testo 330-1 LX flue gas analyzer incl. O2 and CO sensor, Bluetooth® interface, mains unit, basic flue gas probe, spare dirt filters, Testo fast printer, spare thermal paper and system case

    • TÜV-tested flue gas analyzer according to 1st German Federal Immission Control Ordinance (BImSchV) and EN 50379, Parts 1 to 3

    • Long-life sensors with up to 6 years' service life

  • testo 330-2 LX anniversary set - Flue gas analyzer (O2, CO H2-compensated) with printer in a system case

    Order-Nr. 0563 6034 71

    With this anniversary set you will be equipped to take the most important measurements relating to heating systems: The testo 330-2 LX flue gas analyzer tested and certified by the German Technical Safety Standards Authority (TÜV) is supplied with an O2 and CO H2-compensated sensor, TÜV tested and certified modular flue gas probe, testo fast printer, system case, and other practical accessories.

    • 5-year warranty without a maintenance contract on O2 and CO sensors

    • Included in the anniversary set: TÜV tested and certified testo 330-2 LX flue gas analyzer including O2 and CO H2-compensated sensor, Bluetooth® interface, mains unit, TÜV tested and certified modular flue gas probe, replacement dirt filter, testo fast printer, replacement thermal paper and system case

    • testo 330-2 LX flue gas analyzer with fresh air valve to protect the CO measuring cell and to extend the CO measuring range to 30,000 ppm

    • Single-hose connection: just one hand movement is needed to securely connect all the channels for flue gas measurement (gas paths, draught, temperature probe integrated into the flue gas probe)

  • testo 330-1 LX anniversary set - Flue gas analyzer (O2, CO) in a system case
     

    Order-Nr. 0563 6033 70

    This anniversary set means you have the appropriate equipment ready to hand and can get down to work straight away: the set with testo 330-1 LX flue gas analyzer, basic flue gas probe, system case and practical accessories is ideal for customer service and maintenance engineers.
     

    • 5-year warranty without maintenance contract on O2 and CO sensors

    • Included in the anniversary set: TÜV-tested testo 330-1 LX flue gas analyzer incl. O2 and CO sensor, Bluetooth® interface, mains unit, basic flue gas probe, spare dirt filters and system case

    • TÜV-tested flue gas analyzer according to 1st German Federal Immission Control Ordinance (BImSchV) and EN 50379, Parts 1 to 3

    • Long-life sensors with up to 6 years' service life

  • Mini ambient air probe for flue gas analyzers

    Order-Nr. 0600 3692

    Use the mini ambient air probe for direct measurement of ambient air temperature on the flue gas analyzer.

    • Can be plugged directly into the flue gas analyzer 

    • Shock-resistant thanks to plastic basket

    • Measuring range: 0 to +80 °C

    Rs.  6,533.00
    Taxes & freight extra, probes & accessories additional
  • Industrial probe set 1 200 °C

    Order-Nr. 0600 7610

    The industrial probe set 1 200 °C enables the extractive sampling of flue gas analyzed at high flue gas temperatures (up to 1 200 °C) or for applications involving large flue gas pipe diameters.

    • Very easy to handle

    • Can be used in combination with testo 340 and testo 350

    • Unheated sampling tube (1 200 °C) can be extended up to max. 3 m using optional extension tubes

    • Additional inline filter to protect the gas sampling hose from contamination

    Price on Request
107 Products found
more...