Ventilation Duct

To ensure ventilation and air conditioning systems function perfectly, the volumetric flows must be correctly set across the whole system. The volumetric flow along with the air velocity must therefore be measured according to EN 12599 and EN 16211. Observance of air flows in the ventilation duct is of utmost importance. If the air flows are smaller than intended, the removal of room loads (heating, cooling and substance loads) may not be ensured in certain circumstances. Therefore, the most accurate recording of air flows as possible is particularly important.

17 Products or Recomendations for Ventilation Duct
  • testo 510 set - differential pressure measuring instrument

    Order-Nr. 0563 0510

    Differential pressure measurement on gas hot water heaters or on filters of air conditioning systems, and also flow measurements in ventilation ducts using a Pitot tube: the compact testo 510 differential pressure measuring instrument, which comes with a silicone connection hose and other useful accessories, can help you maintain and install systems in the sanitary and HVAC sector.

    • Differential pressure measurement from 0 to 100 hPa 

    • Flow measurement possible with a Pitot tube (available as an option)  

    • Magnets on the rear allow hands-free work 

    • 10 units to choose from, display in pascals can be selected 

    Rs.  10,008.00
    Taxes & freight extra, probes & accessories additional
  • testo 480 - Digital temperature, humidity and air flow meter

    Order-Nr. 0563 4800

    Air flow measurements in ducts, temperature measurements in laboratories, humidity measurements in production, pressure difference measurements in clean rooms. The testo 480 digital temperature, humidity and air flow meter is a one stop solution with a wide range of optional sensors which equips you to measure, analyse and log these and a variety of other parameters with only one device.

    • High-quality optional sensors for measuring air flow, temperature, humidity, pressure,degree of turbulence, heat radiation, CO2, illumination intensity, PMV/PPD and WBGT

    • High-precision, integrated pressure sensor included

    • Pro-software for easy and efficient analysis andlogging included

    • Intelligent calibrationconcept

    Price on Request
  • testo 435-2 - Indoor air quality meter

    Order-Nr. 0563 4352

    The testo 435-2 indoor air quality meter allows you to carry out all the measurements that are necessary to check and adjust ventilation and air conditioning systems and assess the indoor air quality. The IAQ meter also offers a wide range of probes and sensors to equip you to measure various parameters.

    • Comprehensive range of measuring functions using optional accessories – e.g. anemometers, moisture sensors, lux and degree of turbulence sensors

    • Super-size memory for up to 10,000 readings

    • Displays dew point difference, min, max and mean values

    • PC software for analyzing and logging measuring data

    Rs.  61,924.00
    Taxes & freight extra, probes & accessories additional
  • testo 435-4 - Multifunction IAQ meter

    Order-Nr. 0563 4354

    The testo 435-4 multifunction IAQ meter helps you inspect and adjust ventilation and air conditioning systems and for indoor air quality testing. Additional integrated pressure difference sensor for pitot static tube measurements and filter monitoring with a wide range of optional sensors and probes.

    • Includes pressure difference sensor for pitot static tube measurements or filter monitoring

    • Further sensors optionally available (eg. anemometer, moisture sensors, lux and degree of turbulence sensors) for a variety of different measuring applications

    • Super-size memory for up to 10,000 measurements

    • PC software for analyzing and logging measuring data

    Rs.  83,520.00
    Taxes & freight extra, probes & accessories additional
  • testo 425 - Air Velocity Meter with thermal flow probe

    Order-Nr. 0560 4251

    The functional testing of ventilation and air conditioning systems includes monitoring the flow speed in ventilation ducts. If the air flow velocity and volumetric flow are not set correctly, the room air quality may suffer. The testo 425 air velocity meter measures the air velocity and automatically calculates the volumetric air flow.

    • Temperature and flow measurement as well as volumetric flow calculation

    • Permanently attached extendible telescopic probe

    • With single and multi-point averaging

    • Hold function, display of min/max value, Auto-off function

    Rs.  42,336.00
    Taxes & freight extra, probes & accessories additional
  • testo 416 - Air flow meter with a telescopic vane

    Order-Nr. 0560 4160

    Air flow meter with a fixed vane probe – ideal for carrying out air flow measurements in air ducts thanks to the extendable telescope. The volume flow is directly shown in the display. The timed and point mean value calculations provide

    • Permanently connected telescopic sensor – maximum length 890 mm, diameter 16 mm

    • Air flow measurements, selective and time mean values for calculating air volume

    • Min/max display; auto power off

    • Calibration certificate and batteries included

    Rs.  45,684.00
    Taxes & freight extra, probes & accessories additional
  • testo 405 - Pocket sized thermal anemometer

    Order-Nr. 0560 4053

    Use the testo 405 thermal anemometer to measure air velocity, volumetric flow and air temperature. It is suitable for carrying out quick check measurements in ventilation ducts and for measuring the air velocity in rooms for indoor air quality, e.g. at draughty windows.

    • Measurement of air velocity, volumetric flow and air temperature

    • For measurements in ventilation ducts and in rooms

    • Particularly precise in the range between 0 and 2 m/s

    • Telescope extendible to 300 mm

    Rs.  8,775.00
    Taxes & freight extra, probes & accessories additional
  • testo 445 - climate measuring instrument

    Order-Nr. 0560 4450

    You can keep a close eye on indoor air quality with the testo 445 climate measuring instrument: the allrounder can measure up to 6 parameters (with the appropriate probe), which can help you make a professional assessment of indoor air quality. The climate measuring instrument therefore supports you in adjusting and checking ventilation and air conditioning systems.

    • Multi-function climate measuring instrument: measure up to 6 measurement parameters at the same time

    • Internal reading memory for up to 3,000 readings

    • Automatic allocation of the duct cross-section to the measuring location (max. 99 measuring locations)

    • Automatic mean value calculation and determination of the volume flow

    Price on Request
  • testo 405 i - thermal anemometer with smartphone operation

    Order-Nr. 0560 1405

    With the testo 405i hot wire anemometer, you can measure air velocities, temperatures and volume flows. Via Bluetooth, the readings are transmitted wirelessly straight to the testo Smart Probes App on your smartphone or tablet. You can view the values conveniently and use numerous intelligent features:

    • for measuring volume flow, air velocity and temperature

    • Simple configuration of the dimension and geometry of the duct cross-section for determining the volume flow

    • Convenient for working in ventilation ducts thanks to its telescopic tube, which can be extended up to 400 mm

    • Really convenient to operate thanks to the testo Smart Probes App (e.g. easy viewing of readings, measurement data trend, log function)

    Rs.  10,429.00
    Taxes & freight extra, probes & accessories additional
  • testo 512 - Differential pressure meter for 0…200 hPa

    Order-Nr. 0560 5128

    The testo 512 differential pressure meter is available as four different models. This model has a measuring range from 0…200 hPa and is ideal for measuring pressure differences at filters and for carrying out pitot static tube measurements in air ducts at air flow speeds between 10 and 100 m/s.

    • 8 measurement units to choose from: psi, kPa, hPa, Pa, mm H2O, mmHg, inch H2O, inch Hg

    • 2 air flow units to select from: m/s, fpm

    • Integrated density compensation

    • Backlit display, min/max values, hold function

    Rs.  44,982.00
    Taxes & freight extra, probes & accessories additional
  • testo 512 - Pressure and flow velocity measuring instrument

    Order-Nr. 0560 5127

    The pressure measuring instrument testo 512 is available as four different models. This model has a measuring range from 0 to 20 hPa and is ideal for measuring differential pressure at filters and for carrying out pitot static tube air flow measurements between 5 and 55 m/s in air ducts.

    • 8 measurement units to choose from: psi, kPa, hPa, Pa, mm H2O, mmHg, inch H2O, inch Hg

    • 2 air flow units to select from: m/s, fpm

    • Integrated density compensation

    • Backlit display, min/max values, hold function

    Rs.  44,982.00
    Taxes & freight extra, probes & accessories additional
  • testo 512 - Differential pressure meter for 0…2 hPa

    Order-Nr. 0560 5126

    The testo 512 differential pressure meter is available as four different models. This model has a measuring range from 0…2 hPa and is ideal for measuring pressure differences at filters and for carrying out pitot static tube measurements in air ducts at air flow speeds between 2 and 17,5 m/s.

    • 8 measurement units to choose from: psi, kPa, hPa, Pa, mm H2O, mmHg, inch H2O, inch Hg

    • 2 air flow units to select from: m/s, fpm

    • Integrated density compensation

    • Backlit display, min/max values, hold function

    Rs.  44,982.00
    Taxes & freight extra, probes & accessories additional
  • testo 435-3 - Multi-function climate measuring instrument

    Order-Nr. 0560 4353

    testo 435-3 – multi-function climate measuring instrument with integrated differential pressure measurement. You can use this to carry out measurements for adjusting ventilation and air conditioning systems and assess room air quality. For this we offer a comprehensive range of optional probes and sensors to choose from.

    • Includes Pitot tube for differential pressure measurement for filter monitoring or for measurement

    • Further optional probes can be attached: thermal and vane anemometers, along with probes for air humidity, CO2, absolute pressure and temperature

    • Display of dew point distance, min., max. and mean values

    • Illuminated display

    Rs.  78,628.00
    Taxes & freight extra, probes & accessories additional
  • testo 521-1 - differential pressure measuring instrument (0.2 % of f.v.)

    Order-Nr. 0560 5210

    The high-precision testo 521-1 differential pressure measuring instrument is ideal for accurate differential pressure measurements in air conditioning and ventilation technology, for instance for pressure drop on filters, checking fans and extractors or for Pitot tube measurements.

    • Integrated differential pressure sensor with an accuracy of 0.2 % of f.v.

    • Calculation of the flow velocity and the volume flow via Pitot tube (optional)

    • Multi-point and timed mean calculation

    • 2 probe inputs for additional pressure and temperature probes

    Rs.  94,116.00
    Taxes & freight extra, probes & accessories additional
  • testo 521-3 - Differential pressure measuring instrument (up to 2.5 hPa)

    Order-Nr. 0560 5213

    The testo 521-3 high-precision differential pressure measuring instrument easily determines even the smallest differential pressures (up to +2.5 hPa). Its high accuracy and a resolution of 0.1 Pa make the instrument ideal for differential pressure measurements in clean rooms or for flue inspections.
     

    • Integrated temperature-compensated differential pressure sensor with accuracy of up to ± 0.5 Pa

    • Calculation of the flow velocity and the volume flow via Pitot tube (optional)

    • Direct zeroing of the display values of pressure probes

    • 2 probe inputs for additional pressure and temperature probes
       

    Rs.  96,734.00
    Taxes & freight extra, probes & accessories additional
  • testo 521-2 - differential pressure measuring instrument (0.1 % of f.v.)

    Order-Nr. 0560 5211

    The high-precision testo 521-2 differential pressure measuring instrument is ideal for accurate differential pressure measurements in air conditioning and ventilation technology, for instance for pressure drop on filters, checking fans and extractors or for Pitot tube measurements.

    • Integrated differential pressure sensor with an accuracy of 0.1 % of f.v.

    • Calculation of the flow velocity and the volume flow via Pitot tube (optional)

    • Multi-point and timed mean calculation

    • 2 probe inputs for additional pressure and temperature probes
       

    Rs.  117,678.00
    Taxes & freight extra, probes & accessories additional
  • testo 510 i - differential pressure measuring instrument with smartphone operation

    Order-Nr. 0560 1510

    Handy and intelligent: the compact testo 510i differential pressure measuring instrument featuring professional measuring technology and smartphone operation for measuring differential pressure, air flow velocity and volume flow. Readings can be viewed conveniently on your smartphone/tablet via the testo Smart Probes App and emailed directly.

    • Measurement of gas flow and static pressure

    • Measurement menu for pressure drop test including alerts

    • Simple configuration and determination of volume flow with Pitot tube

    • Magnetic holder for easy attachment

    Rs.  9,849.00
    Taxes & freight extra, probes & accessories additional
17 Products found