- Home
- testo 300 kit with printer
0564 3002 74
testo 300 kit with printer - flue gas analyzer (O2, CO up to 4,000 ppm)
0564 3002 74
testo 300 kit with printer - flue gas analyzer (O2, CO up to 4,000 ppm)
With this kit, you will be equipped for the most important measurements involving heating systems: the TÜV-tested testo 300 flue gas analyzer is supplied with O2 and CO sensor up to 4,000 ppm, basic flue gas probe, testo Bluetooth® printer, instrument bag and practical accessories.
- Including O2, CO sensor up to 4,000 ppm and NO sensor
- In the kit: testo 300 flue gas analyzer, including O2 and CO sensor up to 4,000 ppm, NO sensor, mains unit, basic flue gas probe, spare dirt filters, Bluetooth® printer, EasyHeat software, instrument bag
Temperature - TC Type K (NiCr-Ni)
Temperature - TC Type K (NiCr-Ni) | Measuring range -40 to +1200 °C |
|---|---|
Accuracy ±0.5 % of mv (Remaining Range) ±0.5 °C (0.0 to +100.0 °C) | |
Resolution 1 °C (Remaining Range) 0.1 °C (-40 to +999.9 °C) | |
Differential Pressure - Piezoresistive
Differential Pressure - Piezoresistive | Measuring range -100 to +200 hPa |
|---|---|
Accuracy ±1 % of mv (+50.1 to +100.0 hPa) ±0.5 hPa (0 to +50.0 hPa) ±1.5 % of mv (+100.1 to +200 hPa) | |
Resolution 0.01 hPa | |
Flue gas O₂
Flue gas O₂ | Measuring range 0 to 21 Vol.% |
|---|---|
Accuracy ±0.2 Vol.% | |
Resolution 0.1 Vol.% | |
Flue gas NO
Flue gas NO | Measuring range 0 to 3000 ppm |
|---|---|
Accuracy ±5 ppm (0 to 100 ppm) ±5 % of mv (101 to 2000 ppm) ±10 % of mv (2001 to 3000 ppm) | |
Resolution 1 ppm | |
Differential Pressure flue gas Draught - Piezoresistive
Differential Pressure flue gas Draught - Piezoresistive | Measuring range -9.99 to +40 hPa |
|---|---|
Accuracy ±0.02 hPa (0.1 to +3.00 hPa) ±1.5 % of mv (+3.01 to +40 hPa) ±0.005 hPa (0 to 0.1 hPa) | |
Resolution 0.001 hPa (0 to 0.1 hPa) 0.01 hPa (Remaining Range) | |
Flue gas degree of effectivity, Eta (calculated)
Flue gas degree of effectivity, Eta (calculated) | Measuring range 0 to 120 % |
|---|---|
Resolution 0.1 % | |
Flue gas loss (calculated)
Flue gas loss (calculated) | Measuring range 0 to 99.9 % |
|---|---|
Resolution 0.1 % | |
Flue gas CO₂ calculation (calculated from O₂)
Flue gas CO₂ calculation (calculated from O₂) | Measuring range Display range 0 to CO₂ max |
|---|---|
Accuracy ±0.2 Vol.% | |
Resolution 0.1 Vol.% | |
Flue gas CO (without H₂-compensation)
Flue gas CO (without H₂-compensation) | Measuring range 0 to 4000 ppm |
|---|---|
Accuracy ±5 % of mv (401 to 2000 ppm) ±10 % of mv (2001 to 4000 ppm) ±20 ppm (0 to 400 ppm) | |
Resolution 1 ppm | |
Ambient CO
Ambient CO | Measuring range 0 to 2000 ppm |
|---|---|
Accuracy ±10 % of mv (101 to 2000 ppm) ±10 ppm (0 to 100 ppm) | |
Resolution 1 ppm | |
General technical data
General technical data | Operating humidity 15 to 90 %RH non-condensing |
|---|---|
Weight approximately 800 g | |
Dimensions 244 (including probe connection) x 98 x 59 mm (LxWxH) | |
Operating temperature -5 to +45 °C | |
Protection class IP40 | |
Product colour black/orange | |
Display type 5.0" touch display, HD 1280*720 pixels, IPS (160 k) | |
Power supply Rechargeable battery, USB mains unit | |
Warranty conditions https://www.testo.com/guarantee | |
Authorizations TÜV-tested according to 1st German Federal Immission Control Ordinance (BImSchV) EN 50379, Parts 1-3 | |
Guarantee Gas sensors (O₂, CO) 24 months; Thermocouple 12 months; rechargeable battery: 12 months | |
Memory 1,000,000 measuring values | |
Battery life 10 h | |
Storage battery type Lithium ion battery | |
Storage temperature -20 to +50 °C | |
Charging temperature 0 to +45 °C | |
- testo 300 flue gas analyzer with O2 and CO sensor up to 4,000 ppm (0633 3002 74)
- USB mains unit, including cable (0554 1106)
- Compact basic flue gas probe, 180 mm; Ø 6 mm; Tmax. 500°C; 1.5 m hose; including dirt filters and cone for fixing (0600 9740)
- Spare dirt filters, compact probe; 10 off (0554 0040)
- BLUETOOTH®/IRDA printer, including 1 roll of thermal paper and rechargeable battery (0554 0621)
- Spare thermal paper for printer, indelible ink (0554 0568)
- EasyHeat PC software (0554 3332)
- Instrument bag (0516 3001)
- The Testo ZIV driver is used to connect the testo 300, testo 320 and testo 330 measuring instruments to an application program (sweeping district administration program) according to the interface defined by the Zentralverband des Schornsteinfegerhandwerks (ZIV, Central Association of Chimney Sweeps) in version 1.0 of 01. August 2012, in version 2.0 of 13. February 2017 as well as version 3.0 from 02. July 2021. Please check with the manufacturer of your application program as to whether this interface is supported.