Efficiency measurement

66 Products or Recomendations for Efficiency measurement
  • testo 310 set with printer

    Order-Nr. 0563 3110

    testo 310 incl. battery and calibration protocol for the measurement of O2, CO, hPa and °C; IR printer (0554 3100); probe 180 mm with cone; case; mains unit incl. cable; silicon hose for pressure measurement; particle filter 5 off; 2 rolls spare thermal paper for printer.

    • Robust and light instrument for daily use

    • 30 seconds sensor zeroing

    • Integrated condensate trap

    • Integrated magnets for easy fixing to burner

    MYR3,697.16
    excl. VAT
  • testo 310 - Entry-level flue gas analyzer

    Order-Nr. 0563 3100

    Being a systems mechanic you know only too well how tough things can get when you’re working out in the field. That’s why your measuring tools need to be rugged and reliable. Like the testo 310 flue gas analyzer. Designed especially for use in the field.

    • Direct O2, CO, flue gas and ambient temperature measurements

    • Integrated measurement menu for flue gas, draft, CO ambient air and pressure

    • Quick sensor zero in only 30 seconds

    • Large, backlit digital display, rechargeable lithium battery with up to 10 hours life

    MYR2,934.25
    excl. VAT
  • testo 320 basic - compact flue gas analyzer

    Order-Nr. 0632 3223

    Flue gas measurement on heating systems with a compact flue gas analyzer for oil and gas: the testo 320 basic features all the essential functions for carrying out flue gas analysis, flue draught and pressure measurements. The flue gas analyzer is impressive because it is easy to operate (featuring user-friendly menu guidance) and reliable (2-year warranty for the instrument, probe, O2/CO sensor).

    • Self-explanatory menu guidance with standardized measuring procedures for quick, easy handling

    • Sensors can be changed by the user

    • Easy to operate thanks to single-hose connection

    • TÜV-tested according to EN 50379 Part 1-3 and to 1st German Federal Immission Control Ordinance (BImSchV), Part 1-2

    Price on Request
  • testo 320 - Super efficient flue gas analyzer

    Order-Nr. 0632 3220

    Temperature measurements at radiators; flue gas parameter and pressure measurements at burners; CO measurements in the ambient air: the testo 320 allows you to carry out all measurements in and around heating systems with only one measuring device.

    • Six applications, one device: flue gas, flue draft, pressure, gas leak detection, CO ambient air and pressure difference measurements

    • Integrated flue gas sensors with temperature sensor included; ultra-fine pressure sensors and a wide range of other sensors, ports and probes optional

    • Rugged, high-quality design, high-resolution, multi-color display, self-explanatory menu guide

    • TÜV-tested according to EN 50379, Parts 1-3 and 1st BImSchV

    Price on Request
  • testo 330-1 LX anniversary set - Flue gas analyzer (O2, CO) with printer in a system case

     

    Order-Nr. 0563 6033 71

    This anniversary set means you have the appropriate equipment ready to hand and can get down to work straight away: the set with testo 330-1 LX flue gas analyzer, basic flue gas probe, testo fast printer, system case and practical accessories is ideal for customer service and maintenance engineers.

     

    • 5-year warranty without maintenance contract on O2 and CO sensors

    • Included in the anniversary set: TÜV-tested testo 330-1 LX flue gas analyzer incl. O2 and CO sensor, Bluetooth® interface, mains unit, basic flue gas probe, spare dirt filters, Testo fast printer, spare thermal paper and system case

    • TÜV-tested flue gas analyzer according to 1st German Federal Immission Control Ordinance (BImSchV) and EN 50379, Parts 1 to 3

    • Long-life sensors with up to 6 years' service life

    MYR9,635.01
    excl. VAT
  • testo 330i LX anniversary set - Flue gas analyzer (O2, CO) in a system case

    Order-Nr. 0563 6035 70

    Flue gas analysis with no stress, paper or shaky probes – the testo 330i LX flue gas analyzer operated by smartphone App makes this possible. The smart anniversary set for measurements on gas, oil and solid fuel systems provides you with the testo 330i LX flue gas analyzer with O2 and CO sensor, along with additional practical accessories.

    • 5-year warranty without a maintenance contract on O2 and CO sensors

    • Included in the anniversary set: testo 330i LX flue gas analyzer, including O2 and CO sensor, Bluetooth® interface, USB mains unit, basic flue gas probe, replacement dirt filter, and system case

    • Paperless documentation and report generation on site via smartphone App

    • Operation independent of measuring location via free smartphone App

    MYR7,643.99
    excl. VAT
  • testo 330-2 LX anniversary set - Flue gas analyzer (O2, CO H2-compensated) in a system case

    Order-Nr. 0563 6034 70

    With this anniversary set you will be equipped to take the most important measurements relating to heating systems: The testo 330-2 LX flue gas analyzer tested and certified by the German Technical Safety Standards Authority (TÜV) is supplied with an O2 and CO H2-compensated sensor, TÜV tested and certified modular flue gas probe, system case, and other practical accessories.

    • 5-year warranty without a maintenance contract on O2 and CO sensors

    • Included in the anniversary set: TÜV tested and certified testo 330-2 LX flue gas analyzer, including O2 and CO H2-compensated sensor, Bluetooth® interface, mains unit, TÜV tested and certified modular flue gas probe, replacement dirt filter and system case

    • testo 330-2 LX flue gas analyzer with fresh air valve to protect the CO measuring cell and to extend the CO measuring range to 30,000 ppm

    • Single-hose connection: just one hand movement is needed to securely connect all the channels for flue gas measurement (gas paths, draught, temperature probe integrated into the flue gas probe)

    MYR10,768.16
    excl. VAT
  • testo 330-2 LX anniversary set - Flue gas analyzer (O2, CO H2-compensated) with printer in a system case

    Order-Nr. 0563 6034 71

    With this anniversary set you will be equipped to take the most important measurements relating to heating systems: The testo 330-2 LX flue gas analyzer tested and certified by the German Technical Safety Standards Authority (TÜV) is supplied with an O2 and CO H2-compensated sensor, TÜV tested and certified modular flue gas probe, testo fast printer, system case, and other practical accessories.

    • 5-year warranty without a maintenance contract on O2 and CO sensors

    • Included in the anniversary set: TÜV tested and certified testo 330-2 LX flue gas analyzer including O2 and CO H2-compensated sensor, Bluetooth® interface, mains unit, TÜV tested and certified modular flue gas probe, replacement dirt filter, testo fast printer, replacement thermal paper and system case

    • testo 330-2 LX flue gas analyzer with fresh air valve to protect the CO measuring cell and to extend the CO measuring range to 30,000 ppm

    • Single-hose connection: just one hand movement is needed to securely connect all the channels for flue gas measurement (gas paths, draught, temperature probe integrated into the flue gas probe)

    MYR12,048.56
    excl. VAT
  • testo 330i LX anniversary set - Flue gas analyzer (O2, CO H2-compensated) in a system case

    Order-Nr. 0563 6035 71

    Flue gas analysis with no stress, paper or shaky probes – the testo 330i LX flue gas analyzer operated by smartphone App makes this possible. The smart anniversary set for measurements on gas, oil and solid fuel systems provides you with the testo 330i LX flue gas analyzer with O2 and CO H2-compensated sensor, along with additional practical accessories.

    • 5-year warranty without a maintenance contract on O2 and CO sensors

    • Included in the anniversary set: testo 330i LX flue gas analyzer, including O2 and CO H2-compensated sensor, Bluetooth® interface, USB mains unit, modular flue gas probe certified by the German Technical Safety Standards Authority (TÜV), testoFix probe mount, replacement dirt filter, and system case

    • Paperless documentation and report generation on site via free smartphone App

    • Operation independent of measuring location via smartphone App

    MYR9,519.77
    excl. VAT
  • testo 330-1 LX anniversary set - Flue gas analyzer (O2, CO) in a system case
     

    Order-Nr. 0563 6033 70

    This anniversary set means you have the appropriate equipment ready to hand and can get down to work straight away: the set with testo 330-1 LX flue gas analyzer, basic flue gas probe, system case and practical accessories is ideal for customer service and maintenance engineers.
     

    • 5-year warranty without maintenance contract on O2 and CO sensors

    • Included in the anniversary set: TÜV-tested testo 330-1 LX flue gas analyzer incl. O2 and CO sensor, Bluetooth® interface, mains unit, basic flue gas probe, spare dirt filters and system case

    • TÜV-tested flue gas analyzer according to 1st German Federal Immission Control Ordinance (BImSchV) and EN 50379, Parts 1 to 3

    • Long-life sensors with up to 6 years' service life

    MYR8,354.61
    excl. VAT
  • Mini ambient air probe for flue gas analyzers

    Order-Nr. 0600 3692

    Use the mini ambient air probe for direct measurement of ambient air temperature on the flue gas analyzer.

    • Can be plugged directly into the flue gas analyzer 

    • Shock-resistant thanks to plastic basket

    • Measuring range: 0 to +80 °C

    MYR313.70
    excl. VAT
  • Modular flue gas probe, 180 mm, Ø 8 mm, Tmax 500 °C, TÜV-tested

    Order-Nr. 0600 9760

    TÜV-tested modular flue gas probe with 180 mm long probe shaft including dirt filter and thermocouple. The quick-change click system enables quick, flexible replacement of the probe shaft.

    • Easy probe shaft replacement via quick-change click system

    • Flue gas path and temperature channel can be connected to the instrument via a bayonet lock

    • Integrated dirt filter protects instrument and sensors

    • Integrated thermocouple probe for temperature measurements up to 500 °C

    MYR1,414.84
    excl. VAT
  • Modular flue gas probe, 300 mm, Ø 8 mm, Tmax 500 °C, TÜV-tested

    Order-Nr. 0600 9761

    TÜV-tested modular flue gas probe with 300 mm long probe shaft including dirt filter and thermocouple. The quick-change click system enables quick, flexible replacement of the probe shaft.

    • Easy probe shaft replacement via quick-change click system

    • Flue gas path and temperature channel can be connected to the instrument via a bayonet lock

    • Integrated dirt filter protects instrument and sensors

    • Integrated thermocouple probe for temperature measurements up to 500 °C

    MYR1,446.85
    excl. VAT
  • Combustion air temperature probe (190 mm immersion depth)

    Order-Nr. 0600 9787

    The probe is used for the specific measurement of combustion air temperature within the context of flue gas or particulate matter measurements.

    • Flexible positioning (immersion depth 190 mm, cable length 2.2 m) 

    • Cone for attachment included

    • Measuring range: 0 to +100 °C

    MYR608.19
    excl. VAT
66 Products found
more...