Air outlets

15 Products or Recomendations for Air outlets
  • testo 410-1 - Vane anemometer

    Order-Nr. 0560 4101

    The testo 410-1 vane anemometer measures air velocity and air temperature. Use it to carry out quick spot measurements at ventilation grilles (air outlets). The anemometer is also ideal for use outdoors. It displays the units m/s, km/h, fpm, mph and kts, and also calculates wind chill and the Beaufort wind force.

    • Vane anemometer with permanently installed 40 mm vane

    • Measurement of air velocity and air temperature

    • Calculates wind chill and the Beaufort wind force

    • Practical: with single-point averaging, max/min and Hold function

    MYR528.17
    excl. VAT
  • testo 410-2 - Vane anemometer

    Order-Nr. 0560 4102

    Ideal for rapid measurement at ventilation grilles (air outlets) and for inspecting air conditions – also outdoors: use the testo 410-2 vane anemometer to measure humidity, as well as air velocity and air temperature. Dew point and wet bulb temperature, wind chill or Beaufort wind force: the anemometer can accomplish the calculation of all these parameters at the touch of a button.

    • Permanently installed vane with a diameter of 40 mm

    • Measurement of air velocity, air temperature and humidity

    • Calculates dew point and wet bulb temperature, wind chill and Beaufort wind force

    • Includes single-point averaging, max/min and Hold function

    MYR821.59
    excl. VAT
  • testo 445 - climate measuring instrument

    Order-Nr. 0560 4450

    You can keep a close eye on indoor air quality with the testo 445 climate measuring instrument: the allrounder can measure up to 6 parameters (with the appropriate probe), which can help you make a professional assessment of indoor air quality. The climate measuring instrument therefore supports you in adjusting and checking ventilation and air conditioning systems.

    • Multi-function climate measuring instrument: measure up to 6 measurement parameters at the same time

    • Internal reading memory for up to 3,000 readings

    • Automatic allocation of the duct cross-section to the measuring location (max. 99 measuring locations)

    • Automatic mean value calculation and determination of the volume flow

    MYR4,475.00
    excl. VAT
  • testo 435-1 - Multi-function climate measuring instrument

    Order-Nr. 0560 4351

    testo 435 is a series of multi-function climate measuring instruments made by Testo. The testo 435-1 version is the entry-level measuring instrument in this series. You can use this to carry out measurements which you need to adjust ventilation and air conditioning systems and assess air quality. For this we offer you a comprehensive range of optional probes and sensors to choose from.

    • You have the option of connecting thermal anemometers and vane anemometers for measuring air velocity and volumetric flow in ventilation ducts

    • Air quality: measurement of CO2, air humidity, air temperature and absolute pressure with the optional IAQ probe

    • Display of dew point distance, min., max. and mean values

    • Illuminated display

    MYR2,618.42
    excl. VAT
  • testo 435-3 - Multi-function climate measuring instrument

    Order-Nr. 0560 4353

    testo 435-3 – multi-function climate measuring instrument with integrated differential pressure measurement. You can use this to carry out measurements which you need to adjust ventilation and air conditioning systems and assess room air quality. For this we offer a comprehensive range of optional probes and sensors to choose from.

    • Includes differential pressure measurement for filter monitoring or for measurement with a Pitot tube

    • Further optional probes can be attached: thermal and vane anemometers, along with probes for air humidity, CO2, absolute pressure and temperature

    • Display of dew point distance, min., max. and mean values

    • Illuminated display

    MYR4,218.92
    excl. VAT
  • testo 417 Set 2 - vane anemometer set

    Order-Nr. 0563 4172

    Get the testo 417 vane anemometer with integrated 100 mm vane now, in a set that includes two measurement funnels, a volume flow straightener and other accessories. This ideally equips you to carry out volume flow measurement at plate outlets, ventilation grilles and swirl outlets.

    • testo 417 vane anemometer for measuring air flow velocity, volume flow and temperature

    • Attachable measurement funnels make this ideal for measuring volume flow at ventilation outlets

    • Also suitable for swirl outlets: thanks to the flow straightener, precise measurements can also be taken at swirl outlets

    • Important accessories included in the set: measurement funnels, flow straightener and a bag for storage

    MYR2,728.85
    excl. VAT
  • testo 420 - volume flow hood

    Order-Nr. 0563 4200

    Make sure you get the testo 420 volume flow hood for larger ceiling outlets and at the same time enjoy multiple maintenance benefits on HVAC systems. Because the flow hood with the removable measuring instrument is not only exceptionally light, it also guarantees accurate volume flow calculations at swirl outlets

    • Volume flow hood for larger swirl outlets for measuring volume flow, temperature and relative humidity

    • Impressively light with a weight of 2.9 kg

    • Precise measurement even at swirl outlets thanks to integrated volume flow straightener

    • Fast set-up, convenient operation and protocol creation on site using the App

    MYR12,804.00
    excl. VAT
  • testo 480 - Digital temperature, humidity and air flow meter

    Order-Nr. 0563 4800

    Air flow measurements in ducts, temperature measurements in laboratories, humidity measurements in production, pressure difference measurements in clean rooms. The testo 480 digital temperature, humidity and air flow meter comes with a wide range of optional sensors that allow you to measure, analyse and log these and a variety of other parameters with only one device.

    • High-quality optional sensors for measuring air flow, temperature, humidity, pressure, degree of turbulence, heat radiation, CO2, illumination intensity, PMV/PPD and WBGT

    • High-precision, integrated pressure sensor included

    • Pro-software for easy and efficient analysis and logging included

    • Intelligent calibration concept

    MYR5,953.86
    excl. VAT
  • testo 417 set 1 - Vane anemometer set

    Order-Nr. 0563 4171

    Make sure you get the testo 417 vane anemometer with an integrated 100 mm vane, in a set that includes two measurement funnels and other accessories. This will mean you are ideally equipped for volumetric flow measurement at ventilation grilles and poppet valves.

    • testo 417 vane anemometer for measuring flow velocity, volumetric flow and temperature

    • Attachable measurement funnels make it ideal for volumetric flow measurement at ventilation outlets

    • Simple testing of incoming / outgoing air in controlled ventilation of living spaces

    • Important accessories included in the set: measurement funnels for poppet valves and ventilation grilles, along with a bag for storage

    MYR2,271.11
    excl. VAT
  • testo 435-4 - Multifunction indoor air quality meter

    Order-Nr. 0563 4354

    The testo 435-4 multifunction indoor air quality meter allows you to carry out all the measurements you need to inspect and adjust ventilation and air conditioning systems and to check the quality of the indoor air. There is also an integrated pressure difference sensor for pitot static tube measurements and filter monitoring and a wide range of optionally available sensors and probes to choose from.

    • Includes pressure difference sensor for pitot static tube measurements or filter monitoring

    • Further sensors optionally available (eg. anemometer, moisture sensors, lux and degree of turbulence sensors) for a variety of different measuring applications

    • Super-size memory for up to 10 000 measurements

    • PC software for analyzing and logging measuring data

    MYR4,481.40
    excl. VAT
  • testo 435-2 - Indoor air quality meter

    Order-Nr. 0563 4352

    The testo 435-2 indoor air quality meter allows you to carry out all the measurements that are necessary to check and adjust ventilation and air conditioning systems and assess the quality of the indoor air. Select from a wide range of probes and sensors. Because it’s you know best what your meter needs to be able to do!

    • Comprehensive range of measuring functions using optionally available accessories – e.g. anemometers, moisture sensors, lux and degree of turbulence sensors

    • Super-size memory for up to 10 000 readings

    • Displays dew point difference, min, max and mean values

    • PC software for analyzing and logging measuring data

    MYR3,322.64
    excl. VAT
  • testo 410 i - vane anemometer with smartphone operation

    Order-Nr. 0560 1410

    Professional measuring technology in a small format: the compact testo 410i vane anemometer with smartphone operation measures the volume flow, air velocity and temperature at air outlets quickly and reliably. The testo Smart Probes App enables readings to be viewed conveniently and offers intelligent additional functions.

    • Measurement of air velocity, volume flow and temperature

    • Display of the volume flow of multiple outlets in order to adjust systems

    • Easy parametrization of the outlet (dimension and geometry)

    • Convenient viewing of readings on a smartphone/tablet with the testo Smart Probes App

    MYR440.14
    excl. VAT
  • testo Smart Probes VAC set - with smartphone operation

    Order-Nr. 0563 0003

    With the Testo Smart Probes VAC set, you can check air velocities, humidity, volume flows and temperatures in, on and around air conditioning systems. The robust testo Smart Case enables the measuring instruments to be conveniently transported and ensures that they are always to hand when needed.

    • Easy parametrization of the outlet/duct cross-section for measuring the volume flow

    • List of multiple volume flows and calculation of the total volume flow (in the log)

    • Identification of mould risk thanks to the combined utilization of testo 605i and testo 805i

    • Rapid image documentation with IR temperature readings and measuring spot marking

    MYR1,848.58
    excl. VAT
  • testo 405i exhaust air volume flow kit

    Order-Nr. 0563 0005

    Volume flow measurement at exhaust air outlets and in ventilation ducts: in this kit, you get the testo 405i thermal anemometer with smartphone operation, including the testovent 415 volume flow rate funnel. Using Bluetooth®, the measurement data are easily transmitted via radio from the thermal anemometer to the testo Smart Probes App on your smartphone or tablet.

    • For the measurement of volume flow and temperature at exhaust air outlets and in ventilation ducts

    • Simple configuration of the size and geometry of the duct and outlet cross-section for determining the volume flow

    • Really easy to operate thanks to testo Smart Probes App: funnel factor is stored, easy viewing of readings, measurement data trend, report function

    • Convenient for working in ventilation ducts thanks to its telescope which can be extended up to 400 mm

    MYR580.98
    excl. VAT
  • testovent 417 - funnel set for volume flow measurement

    Order-Nr. 0563 4170

    Use the testovent 417 funnel set (in conjunction with the appropriate measuring equipment) for measuring the volume flow at ventilation grilles and plate outlets quickly and conveniently.

    • Convenient, quick volume flow measurement

    • With the funnel set, the time-consuming loop method is a thing of the past

    • Suitable for outlets up to 300 x 300 mm

    • Easy to assemble

    MYR1,017.92
    excl. VAT
15 Products found