Gas and water pipelines commissioning - Pressure measurement

If a leak, a leaky spot or an indefinable problem occurs somewhere things quickly heat up. You then need someone with a cool head to tackle locating the problem. However, the best thing is to make sure that it does not get that far in the first place: for example through professional commissioning, optimum setting, regular maintenance, random leak detection and endoscopic measurement. Testo offers reliable measuring tools for this.

30 products or recommendations for Gas and water pipelines commissioning - Pressure measurement
  • testo 512 - Differential pressure meter for 0…200 hPa

    Order-Nr. 0560 5128

    The testo 512 differential pressure meter is available as four different models. This model has a measuring range from 0…200 hPa and is ideal for measuring pressure differences at filters and for carrying out pitot static tube measurements in air ducts at air flow speeds between 10 and 100 m/s.
    • 8 measurement units to choose from: psi, kPa, hPa, Pa, mm H2O, mmHg, inch H2O, inch Hg

    • 2 air flow units to select from: m/s, fpm

    • Integrated density compensation

    • Backlit display, min/max values, hold function

  • testo 512 - Differential pressure meter for 0…2 hPa

    Order-Nr. 0560 5126

    The testo 512 differential pressure meter is available as four different models. This model has a measuring range from 0…2 hPa and is ideal for measuring pressure differences at filters and for carrying out pitot static tube measurements in air ducts at air flow speeds between 2 and 17,5 m/s.
    • 8 measurement units to choose from: psi, kPa, hPa, Pa, mm H2O, mmHg, inch H2O, inch Hg

    • 2 air flow units to select from: m/s, fpm

    • Integrated density compensation

    • Backlit display, min/max values, hold function

  • testo 512 - Differential pressure meter for 0…20 hPa

    Order-Nr. 0560 5127

    The testo 512 differential pressure meter is available as four different models. This model has a measuring range from 0….20 hPa and is ideal for measuring pressure differences at filters and for carrying out pitot static tube measurements in air ducts at air flow speeds between 5 and 55 m/s.
    • 8 measurement units to choose from: psi, kPa, hPa, Pa, mm H2O, mmHg, inch H2O, inch Hg

    • 2 air flow units to select from: m/s, fpm

    • Integrated density compensation

    • Backlit display, min/max values, hold function

  • testo 324 basic set - Pressure and leakage measuring instrument

    Order-Nr. 0563 3240 70

    Ready to start right away on all necessary and legally prescribed measurements on gas pipes: make sure you get the basic set with the testo 324 pressure and leakage measuring instrument, including a system case, along with manual test pump and other essential accessories.
    • Included in the set: DVGW-tested testo 324 pressure and leakage measuring instrument, including integrated pressure pump, mains unit, system case with feeding unit, connection block and connection hose, manual test pump, adapter for gas boiler test port and ¾” and 1¼” high-pressure stage stops

    • Automatic pressure build-up to 300 mbar by means of an integrated pressure pump; manual test pump for generating higher pressures, e.g. for the 1 bar test

    • All the important measurements in one instrument: tightness test, load test and serviceability test

    • Step-by-step guide through regulatory-compliant measurement menus: conducting tests on gas pipes has never been easier

  • testo 512 - Differential pressure measuring instrument for 0 to 2000 hPa

    Order-Nr. 0560 5129

    The testo 512 differential pressure measuring instrument is available in four different versions. This version is ideal for differential pressure measurement in the measuring range 0 to 2000 hPa.
    • 7 pressure units to choose from: kPa, hPa, mm H2O, mmHg, psi, inch H2O, inch Hg

    • Large measuring range up to 2000 hPa

    • TopSafe protective case (optional) protects against impact, dirt and spray water

    • Illuminated display, min./max. value display, hold function

  • testo 521-1 - differential pressure measuring instrument (0.2 % of f.v.)

    Order-Nr. 0560 5210

    The high-precision testo 521-1 differential pressure measuring instrument is ideal for accurate differential pressure measurements in air conditioning and ventilation technology, for instance for pressure drop on filters, checking fans and extractors or for Pitot tube measurements.
    • Integrated differential pressure sensor with an accuracy of 0.2 % of f.v.

    • Calculation of the flow velocity and the volume flow via Pitot tube (optional)

    • Multi-point and timed mean calculation

    • 2 probe inputs for additional pressure and temperature probes

  • Basic set testo 312-4

    Order-Nr. 0563 1327

    testo 312-4 differential pressure gauge
    hose set up to 1.2bar for testo 312-4
    balloon pump with release screw
    conical test plug 1/2
    conical test plug 3/4
    testo fast printer
    pressure set for gas pressure measurements in heating systems
    system case
  • testo 521-3 - Differential pressure measuring instrument (up to 2.5 hPa)

    Order-Nr. 0560 5213

    The testo 521-3 high-precision differential pressure measuring instrument easily determines even the smallest differential pressures (up to +2.5 hPa). Its high accuracy and a resolution of 0.1 Pa make the instrument ideal for differential pressure measurements in clean rooms or for flue inspections.
     
    • Integrated temperature-compensated differential pressure sensor with accuracy of up to ± 0.5 Pa

    • Calculation of the flow velocity and the volume flow via Pitot tube (optional)

    • Direct zeroing of the display values of pressure probes

    • 2 probe inputs for additional pressure and temperature probes
       

  • testo 324 - Pressure/gas leak detector

    Order-Nr. 0632 3240

    Professional pressure/leak detector for installation, maintenance and service of gas and water pipes. Specially designed to carry out reliable leak tightness checks, load tests, serviceability tests, temperature measurements in accordance with existing rules and regulations.
    • Easy to set up, easy to use due to legally compliant measuring menus (i.e. according to TRGI 2008)

    • Extremely accurate and DVGW-compliant measuring results

    • Leak tightness checks of gas pipes according to TRGI 2008 and liquid gas pipes according to TRF 2012

    • Easy to use due to automatic pressure build-up; quick and easy data storage

  • testo 521-2 - differential pressure measuring instrument (0.1 % of f.v.)

    Order-Nr. 0560 5211

    The high-precision testo 521-2 differential pressure measuring instrument is ideal for accurate differential pressure measurements in air conditioning and ventilation technology, for instance for pressure drop on filters, checking fans and extractors or for Pitot tube measurements.
    • Integrated differential pressure sensor with an accuracy of 0.1 % of f.v.

    • Calculation of the flow velocity and the volume flow via Pitot tube (optional)

    • Multi-point and timed mean calculation

    • 2 probe inputs for additional pressure and temperature probes
       

  • High-pressure set testo 312-4

    Order-Nr. 0563 1328

    testo 312-4 differential pressure gauge
    hose set up to 1.2bar for testo 312-4
    balloon pump with release screw
    conical test plug 1/2
    conical test plug 3/4
    testo fast printer
    pressure set for gas pressure measurements on heating systems
    high-pressure plug 3/8 und 3/4
    high-pressue plug 1/2 and 1
    high-pressure probe 1up to 25 bar
    system case
  • testo 526-2 - High-precision differential pressure measuring instrument

    Order-Nr. 0560 5281

    The testo 526-2 high-precision differential pressure measuring instrument is ideally suited for checking pressure in sensitive industrial processes, thanks to a measuring accuracy of ± 0.05% of final value. Two additional pressure and temperature probes can also be attached.
    • Temperature-compensated differential pressure sensor

    • Multi-point and timed mean calculation

    • Freely selectable measuring rate for recording measurement data

    • 2 additional probe inputs for the attachment of optional pressure and temperature probes

  • testo 526-1 - High-precision differential pressure measuring instrument

    Order-Nr. 0560 5280

    Ideal for checking pressure in sensitive industrial processes: the testo 526-1 high-precision differential pressure measuring instrument with a measuring accuracy of ± 0.1% of final value. It also has two probe inputs for additional pressure and temperature probes.
    • Temperature-compensated differential pressure sensor

    • Multi-point and timed mean calculation

    • Recording of measurement data with freely selectable measuring rate

    • 2 probe inputs for pressure and temperature

  • Waterproof stainless steel food probe (TC type K)

    Order-Nr. 0602 2292

    With the appropriate measuring instrument, the food probe is ideal for the measurement of food temperatures. The temperature probe is made of hygienic stainless steel, is easy to clean and waterproof in accordance with IP65.
    • Fast thermocouple type K

    • Made of hygienic stainless steel, waterproof according to IP65

    • Short response time of 7 seconds

    • Measuring range: -60 to +400°C

30 Products found
Show More