Government authorities

65 products or recommendations for Government authorities
  • Waterproof surface probe (NTC)

    Order-Nr. 0613 1912

    Thanks to its NTC sensor, the waterproof surface temperature probe delivers reliable, accurate measurement results even at low temperatures. For measurements on flat surfaces.
    • NTC temperature sensor

    • Measuring accuracy of up to ±0.2 °C

    • Ideal for measurements on refrigeration systems, in cold storage warehouses/rooms or outdoors

    • Measuring range: -50 to +150 °C

  • Waterproof immersion/penetration probe (NTC)

    Order-Nr. 0613 1212

    The waterproof immersion/penetration probe with NTC sensor records the temperature in liquids and semi-solid media quickly and accurately.
    • NTC temperature sensor

    • Waterproof

    • Measuring accuracy of up to ±0.2 °C

    • Measuring range: -50 to +150 °C

  • Transport case

    Order-Nr. 0516 3510

    Transport case for secure and tidy storage of testo 350 flue gas analyzer, flue gas probe and accessories, dimensions 570 x 470 x 210 mm (LxWxH)
  • Thin humidity probe (Ø 4 mm) - for material moisture

    Order-Nr. 0636 2135

    The slim humidity probe measures material moisture via the equilibrium moisture content and can very easily be used in recesses or bore holes thanks to its slim design and remote electronics. The material moisture can also be determined directly in the instrument in combination with the testo 635 temperature and humidity measuring instrument.

     
    • Measurement of the material moisture via the equilibrium moisture content

    • Slim design (Ø 4 mm) with remote electronics – ideal for tight measuring points

  • Thermocouple for engine probe

    Order-Nr. 0600 8898

    You can use the thermocouple to measure the flue gas temperature in parallel with flue gas measurement on industrial engines
    • Temperature measurement in parallel with the flue gas measurement on industrial engines

    • Thermocouple with fast response time

    • Can be installed on-site by the user

    • Heat protection handle for comfortable handling even at high temperatures

  • testo NanoMet3 - portable nanoparticle counter for Real Driving Emissions (RDE)

    Order-Nr. 444

    The innovative testo NanoMet3 PN-PEMS (particle number, portable emission measurement system) enables you to measure vehicle Real Driving Emissions – RDE.
     
    • One-button operation

    • Gas conditioning: integrated PMP thermodilution

    • Measurement method for gasoline and diesel vehicles without any additional instrument settings

    • No need for any operating resources

  • testo DiSCmini - handheld measuring instrument for nanoparticle counting

    Order-Nr. 133

    Use the testo DiSCmini to monitor personal exposure to ultrafine particles (UFP) in work areas or to toxic pollutants such as diesel soot. This will enable you to minimize any risks to health.
    • Measurement and display of particle number, mean particle diameter and LSDA (Lung Deposited Surface Area) with a time resolution of 1 second.

    • Operation without solvents or radioactive radiation sources

    • Insensitive to vibrations, and operation is possible in any position

    • Long battery lifetimes of up to 8 hours

  • testo 350 MARITIME - Exhaust gas analyzer for diesel ship engines

    Order-Nr. 0563 3503

    Testo proudly presents the world’s first portable exhaust gas analyzer for diesel ship engines: the testo 350 MARITIME! The groundbreaking exhaust gas analyzer measures emissions at diesel ship engines in compliance with MARPOL Annex VI and NOx Technical Code 2008.
    • Measures O2, CO, NOx (NO + NO2 separate), SO2 – high precision and long-term stable

    • Certified gas sensors: equal to reference measurement

    • Ready to measure after only two minutes

    • Determination of the fuel sulphur content by means of SO2/CO2 ratio according to MEPC 184 (59)

  • testo 350 - Analysis Box for exhaust gas analysis systems

    Order-Nr. 0632 3510

    The testo 350 is a rugged, easy-to-use exhaust gas analyzer designed to meet the highest demands when it comes to carrying out precise industrial emission measurements and providing proper data administration. The Analysis Box can be operated with up to 6 gas sensors, 5 of which are optional. This allows you to select freely from sensors for CO, NO, NO2, SO2, H2S, CxHy and CO2.
    • Increased measurement range for unlimited measurements even when gas concentrations are higher

    • Easy-to-change gas sensors and easy access to wearing parts

    • Sealed housing with built-in impact protection for use in harsh conditions

    • Automatic processing of measuring programmes over a longer period

  • testo 350 - Control Unit for exhaust gas analysis systems

    Order-Nr. 0632 3511

    The testo 350 is a rugged, easy-to-use exhaust gas analyzer designed to meet the highest demands when it comes to carrying out precise industrial emission measurements and providing proper data administration. The Control Unit complements the testo 350 Analysis Box (separate product) and makes it easier to control emission measurements.
    • User-friendly application-specific menu guide

    • testo 350 Analysis Box just as easy to use when not positioned at measurement site

    • Internal memory for receiving measurement data from the Analysis Box

    • Large graphic color display, robust, industrial-type housing

  • testo 340 - Flue gas analyzer for use in industry

    Order-Nr. 0632 3340

    Emission checks in industry: Professional technology meets practical design. The testo 340 combustion analyzer is an easy-to-use flue gas analyzer that can be fitted with up to four different gas sensors.
    • Can measure CO, COlow, NO, NOlow, NO2 or SO2

    • Extended measuring range for use in environments with high gas concentrations

    • Precalibrated gas sensors for quick and easy sensor change

    • Integrated pressure difference and air flow measurements for mass flow calculations

  • Temperature probe with Velcro (NTC)

    Order-Nr. 0613 4611

    Temperature probe with Velcro for surface measurements on pipes
    • With Velcro: makes it easy to attach the surface probe to pipes with a pipe diameter of up to 75 mm

    • NTC temperature probe with cable

    • Measuring range: -50 to +70 °C

  • Temperature probe with magnet (TC Type K)

    Order-Nr. 0602 4892

    Temperature probe with magnet for surface measurements on metal surfaces
    • Self-adhesive thanks to a magnet: probe for measuring surface temperature on metal surfaces

    • TC Type K temperature probe with 1.6 m cable

    • Measuring range: -50 to +400 °C

  • Temperature probe with clamping bracket (TC Type K)

    Order-Nr. 0602 4592

     Pipe wrap probe for pipe diameter 5 to 65 mm, with exchangeable measuring head. Meas. range short-term up to +280°C, TC Type K 
    • With clamping bracket: enables quick, easy attachment of the probe to pipes with a diameter of 5 to 65 mm

    • TC Type K temperature probe with 1.2 m cable

    • Measuring range: -60 to +130 °C, briefly up to +280 °C

  • Surface probe with widened measuring tip (TC type K)

    Order-Nr. 0602 1993

    Waterproof, robust and versatile: this temperature probe with sturdy probe shaft and widened measuring tip is ideal for measuring the temperature on flat surfaces.
    • Extra-wide measuring tip for flat surfaces

    • Thermocouple type K

    • Waterproof and robust (sturdy probe shaft)

    • Measuring range: -60 to +400 °C

65 Products found
Show More