Science and Universities

20 products or recommendations for Science and Universities
  • testo 350 - Analysis Box for exhaust gas analysis systems

    Order-Nr. 0632 3510

    The testo 350 is a rugged, easy-to-use exhaust gas analyzer designed to meet the highest demands when it comes to carrying out precise industrial emission measurements and providing proper data administration. The Analysis Box can be operated with up to 6 gas sensors, 5 of which are optional. This allows you to select freely from sensors for CO, NO, NO2, SO2, H2S, CxHy and CO2.
    • Increased measurement range for unlimited measurements even when gas concentrations are higher

    • Easy-to-change gas sensors and easy access to wearing parts

    • Sealed housing with built-in impact protection for use in harsh conditions

    • Easy operation of the analyzer unit via Control Unit or easyEmission software (both products available separately) 

  • testo 340 - Flue gas analyzer for use in industry

    Order-Nr. 0632 3340

    Emission control in industry: the testo 340 flue gas analyzer gives you professional technology, easy handling and practical execution in one instrument. The high-performance testo 340 flue gas analyzer is fitted with an O2 sensor and can be equipped with up to 3 additional sensors.
    • Can measure CO, COlow, NO, NOlow, NO2 or SO2

    • Extended measuring range for use in environments with high gas concentrations

    • Precalibrated gas sensors for quick and easy sensor change

    • Integrated pressure difference and air flow measurements for mass flow calculations

  • testo 350 - Control Unit for exhaust gas analysis systems

    Order-Nr. 0632 3511

    The Control Unit is the supplement to the testo 350 analyzer unit (please order separately) – it enables you to control emission measurement. The testo 350 flue gas analyzer fulfils the highest requirements in industrial emission measurement: easy handling, accurate measuring technology and robust design are practical features which impress on a daily basis.
    • testo 350 Analysis Box just as easy to use when not positioned at measurement site

    • Internal memory for receiving measurement data from the Analysis Box

    • Large graphic color display, robust, industrial-type housing

    • User-friendly application-specific menu guide

  • testo 350 MARITIME - Exhaust gas analyzer for diesel ship engines

    Order-Nr. 0563 3503

    Testo proudly presents the world’s first portable exhaust gas analyzer for diesel ship engines: the testo 350 MARITIME! The groundbreaking exhaust gas analyzer measures emissions at diesel ship engines in compliance with MARPOL Annex VI and NOx Technical Code 2008.
    • With DNV GL and NK certificate according to MARPOL Annexe VI and NOx Technical Code 2008

    • Unrestricted availability thanks to pre-calibrated gas sensors which are exchangeable on site

    • Ready to measure in less than 2 minutes

    • Tested gas sensors — as good as reference measurement technology

  • Modular flue gas probe, 335 mm, Ø 8 mm, Tmax 1000 °C

    Order-Nr. 0600 8764

    The modular flue gas probe with 335 mm long probe shaft including integrated thermocouple up to 1000 °C and quick-change click system (for quick replacement of the probe shaft).
    • Easy probe shaft replacement via quick-change click system

    • NO2/SO2 special hose (length: 2.2 m)

    • Flue gas path and temperature channel can be connected to the instrument via a bayonet lock

    • Integrated thermocouple probe for temperature measurements up to 1000 °C

  • Modular flue gas probe, 335 mm, Ø 8 mm, Tmax 500 °C

    Order-Nr. 0600 9766

    The modular flue gas probe with 335 mm long probe shaft including integrated thermocouple up to 500 °C and quick-change click system (for quick replacement of the probe shaft).
    • Easy probe shaft replacement via quick-change click system

    • NO2/SO2 special hose (length: 2.2 m)

    • Flue gas path and temperature channel can be connected to the instrument via a bayonet lock

    • Integrated thermocouple probe for temperature measurements up to 500 °C

  • Modular flue gas probe, 700 mm, Ø 8 mm, Tmax 500 °C

    Order-Nr. 0600 9767

    The modular flue gas probe with 700 mm long probe shaft including integrated thermocouple up to 500 °C and quick-change click system (for quick replacement of the probe shaft).
    • Easy probe shaft replacement via quick-change click system

    • NO2/SO2 special hose (length: 2.2 m)

    • Flue gas path and temperature channel can be connected to the instrument via a bayonet lock

    • Integrated thermocouple probe for temperature measurements up to 500 °C

  • Modular flue gas probe 700 mm, Ø 8 mm, Tmax 1000 °C

    Order-Nr. 0600 8765

    The modular flue gas probe with 700 mm long probe shaft including integrated thermocouple up to 1000 °C and quick-change click system (for quick replacement of the probe shaft).
    • Easy probe shaft replacement via quick-change click system

    • NO2/SO2 special hose (length: 2.2 m)

    • Flue gas path and temperature channel can be connected to the instrument via a bayonet lock

    • Integrated thermocouple probe for temperature measurements up to 1000 °C

  • Modular flue gas probe with pre-filter, Ø 14 mm, 700 mm, Tmax 1000°C

    Order-Nr. 0600 8767

    The modular flue gas probe with preliminary filter Ø 14 mm, 700 mm long probe shaft, thermocouple up to 1000 °C and quick-change click system (for quick probe shaft replacement).
    • Easy probe shaft replacement via quick-change click system

    • Preliminary filter offers protection from dusty flue gases

    • Flue gas path and temperature channel can be connected to the instrument via a bayonet lock

    • Integrated thermocouple probe for temperature measurements up to 1000 °C

  • Stainless steel Pitot tube, length 750 mm - for measuring flow velocity, including temperature measurement

    Order-Nr. 0635 2042

    Robust Pitot tube for measuring flow velocity: the Pitot tube provides the optimum conditions, especially for higher flow velocities and for heavily contaminated flow. The 750 mm long Pitot tube has integrated temperature measurement and a connection hose with a maximum load capacity of up to 700 hPa (mbar).
    • For measuring flow velocity

    • Ideal for high flow velocities and heavily contaminated flow

  • Modular flue gas probe with pre-filter, 335 mm, Ø 14 mm, Tmax 1000°C

    Order-Nr. 0600 8766

    The modular flue gas probe with preliminary filter Ø 14 mm, 335 mm long probe shaft, thermocouple up to 1000 °C and quick-change click system (for quick probe shaft replacement).
    • Easy probe shaft replacement via quick-change click system

    • Preliminary filter offers protection from dusty flue gases

    • Flue gas path and temperature channel can be connected to the instrument via a bayonet lock

    • Integrated thermocouple probe for temperature measurements up to 1000 °C

  • Thermocouple for engine probe

    Order-Nr. 0600 8898

    You can use the thermocouple to measure the flue gas temperature in parallel with flue gas measurement on industrial engines
    • Temperature measurement in parallel with the flue gas measurement on industrial engines

    • Thermocouple with fast response time

    • Can be installed on-site by the user

    • Heat protection handle for comfortable handling even at high temperatures

  • testo easyEmission software

    Order-Nr. 0554 3334

    The testo easyEmission PC software offers numerous functions for convenient measurement data management.
    • Convenient measurement data management

    • Including USB connection cable

  • Transport case

    Order-Nr. 0516 3510

    Store your equipment securely in the robust transport case: the case provides enough storage space for the appropriate measuring instrument, probes and accessories.
    • Can be used between plug-in head cable and instrument

  • Analog output unit kit

    Order-Nr. 0554 3149

    The analog output unit enables the output of up to 6 measurement channels as analog signals (4 to 20 mA). Use the analog output unit, for example to output the readings to an analog printer.
    • Output of 6 measurement channels as analog signals (4 to 20mA)

    • Included in the kit: analog output unit, Testo data bus connection cable (length 2 m), Testo data bus terminal

  • testo DiSCmini - handheld measuring instrument for nanoparticle counting

    Order-Nr. 133

    Use the testo DiSCmini to monitor personal exposure to ultrafine particles (UFP) in work areas or to toxic pollutants such as diesel soot. This will enable you to minimize any risks to health.
    • Measurement and display of particle number, mean particle diameter and LSDA (Lung Deposited Surface Area) with a time resolution of 1 second.

    • Operation without solvents or radioactive radiation sources

    • Insensitive to vibrations, and operation is possible in any position

    • Long battery lifetimes of up to 8 hours

  • testo NanoMet3 - portable nanoparticle counter for Real Driving Emissions (RDE)

    Order-Nr. 444

    The innovative testo NanoMet3 PN-PEMS (particle number, portable emission measurement system) enables you to measure vehicle Real Driving Emissions – RDE.
     
    • One-button operation

    • Gas conditioning: integrated PMP thermodilution

    • Measurement method for gasoline and diesel vehicles without any additional instrument settings

    • No need for any operating resources

  • testo ViPR - volatile particle remover for sampling and raw gas conditioning according to UNECE R83 and R49

    Order-Nr. 1122B

    The testo ViPR volatile particle remover is a gas conditioning system for sampling, dilution and conditioning of raw gas for particle determination. It is compliant with the method according to PMP (Particle Measurement Programme) and is characterized by its award-winning technology.
     
    • UNECE R83 and R49 compliant

    • Gas conditioning for particle number measurement for vehicle type approval

    • Primary diluter for direct connection to exhaust pipe or CVS dilution tunnel

    • Einfache Bedienung über PC

  • testo REXS - High mass soot generator

    Order-Nr. 366

    Reproducible EXhaust Simulator generates nano-sized soot particles which are very similar to diesel soot, and is fully automated. It is impressive thanks to its high mass output, ease of use and attractive cost-saving potential.
    • Combustion soot particles with similar mobility distribution to diesel emissions

    • Stable, reproducible particle size distribution with less than 5% deviation

    • 6 possible operation points with mode diameter between 30 nm and 120 nm

    • Stable operation even when there are changes in the absolute pressure due to increasing backpressure in loaded filters

20 Products found