Flue gas, gas and particle

The worldwide uninterrupted pollution of the atmosphere and more and more rules and regulations mean that flue gas analysis and emission control is becoming more and more important. It serves to reduce pollutant emission from combustion systems and it meets the objective of using energy as efficiently as possible.

115 products or recommendations for Flue gas
  • Transport case

    Order-Nr. 0516 3510

    Transport case for secure and tidy storage of testo 350 flue gas analyzer, flue gas probe and accessories, dimensions 570 x 470 x 210 mm (LxWxH)
  • Thermocouple for engine probe

    Order-Nr. 0600 8898

    You can use the thermocouple to measure the flue gas temperature in parallel with flue gas measurement on industrial engines
    • Temperature measurement in parallel with the flue gas measurement on industrial engines

    • Thermocouple with fast response time

    • Can be installed on-site by the user

    • Heat protection handle for comfortable handling even at high temperatures

  • testo ViPR - volatile particle remover for sampling and raw gas conditioning according to UNECE R83 and R49

    Order-Nr. 1122B

    The testo ViPR volatile particle remover is a gas conditioning system for sampling, dilution and conditioning of raw gas for particle determination. It is compliant with the method according to PMP (Particle Measurement Programme) and is characterized by its award-winning technology.
     
    • UNECE R83 and R49 compliant

    • Gas conditioning for particle number measurement for vehicle type approval

    • Primary diluter for direct connection to exhaust pipe or CVS dilution tunnel

    • Einfache Bedienung über PC

  • testo REXS - High mass soot generator

    Order-Nr. 366

    Reproducible EXhaust Simulator generates nano-sized soot particles which are very similar to diesel soot, and is fully automated. It is impressive thanks to its high mass output, ease of use and attractive cost-saving potential.
    • Combustion soot particles with similar mobility distribution to diesel emissions

    • Stable, reproducible particle size distribution with less than 5% deviation

    • 6 possible operation points with mode diameter between 30 nm and 120 nm

    • Stable operation even when there are changes in the absolute pressure due to increasing backpressure in loaded filters

  • testo NanoMet3 - portable nanoparticle counter for Real Driving Emissions (RDE)

    Order-Nr. 444

    The innovative testo NanoMet3 PN-PEMS (particle number, portable emission measurement system) enables you to measure vehicle Real Driving Emissions – RDE.
     
    • One-button operation

    • Gas conditioning: integrated PMP thermodilution

    • Measurement method for gasoline and diesel vehicles without any additional instrument settings

    • No need for any operating resources

  • testo gas detector - Gas detector

    Order-Nr. 0632 0323

    Testo's robust gas detector is a multi-range instrument for detecting methane, propane and hydrogen gases. It has a display which enables direct reading of the ppm-values.
    • Gas detector for methane, propane and hydrogen gases

    • Flexible probe extension for inaccessible areas

    • Acoustic signals on approaching the lower explosive limit

    • With alarm function: continuous tone and indication on the display on reaching the explosive limit

  • testo DiSCmini - handheld measuring instrument for nanoparticle counting

    Order-Nr. 133

    Use the testo DiSCmini to monitor personal exposure to ultrafine particles (UFP) in work areas or to toxic pollutants such as diesel soot. This will enable you to minimize any risks to health.
    • Measurement and display of particle number, mean particle diameter and LSDA (Lung Deposited Surface Area) with a time resolution of 1 second.

    • Operation without solvents or radioactive radiation sources

    • Insensitive to vibrations, and operation is possible in any position

    • Long battery lifetimes of up to 8 hours

  • testo 350 MARITIME - Exhaust gas analyzer for diesel ship engines

    Order-Nr. 0563 3503

    Testo proudly presents the world’s first portable exhaust gas analyzer for diesel ship engines: the testo 350 MARITIME! The groundbreaking exhaust gas analyzer measures emissions at diesel ship engines in compliance with MARPOL Annex VI and NOx Technical Code 2008.
    • Measures O2, CO, NOx (NO + NO2 separate), SO2 – high precision and long-term stable

    • Certified gas sensors: equal to reference measurement

    • Ready to measure after only two minutes

    • Determination of the fuel sulphur content by means of SO2/CO2 ratio according to MEPC 184 (59)

  • testo 350 - Analysis Box for exhaust gas analysis systems

    Order-Nr. 0632 3510

    The testo 350 is a rugged, easy-to-use exhaust gas analyzer designed to meet the highest demands when it comes to carrying out precise industrial emission measurements and providing proper data administration. The Analysis Box can be operated with up to 6 gas sensors, 5 of which are optional. This allows you to select freely from sensors for CO, NO, NO2, SO2, H2S, CxHy and CO2.
    • Increased measurement range for unlimited measurements even when gas concentrations are higher

    • Easy-to-change gas sensors and easy access to wearing parts

    • Sealed housing with built-in impact protection for use in harsh conditions

    • Automatic processing of measuring programmes over a longer period

  • testo 350 - Control Unit for exhaust gas analysis systems

    Order-Nr. 0632 3511

    The testo 350 is a rugged, easy-to-use exhaust gas analyzer designed to meet the highest demands when it comes to carrying out precise industrial emission measurements and providing proper data administration. The Control Unit complements the testo 350 Analysis Box (separate product) and makes it easier to control emission measurements.
    • User-friendly application-specific menu guide

    • testo 350 Analysis Box just as easy to use when not positioned at measurement site

    • Internal memory for receiving measurement data from the Analysis Box

    • Large graphic color display, robust, industrial-type housing

  • testo 340 - Flue gas analyzer for use in industry

    Order-Nr. 0632 3340

    Emission checks in industry: Professional technology meets practical design. The testo 340 combustion analyzer is an easy-to-use flue gas analyzer that can be fitted with up to four different gas sensors.
    • Can measure CO, COlow, NO, NOlow, NO2 or SO2

    • Extended measuring range for use in environments with high gas concentrations

    • Precalibrated gas sensors for quick and easy sensor change

    • Integrated pressure difference and air flow measurements for mass flow calculations

  • testo 330i LX anniversary set - Flue gas analyzer (O2, CO H2-compensated) in a system case

    Order-Nr. 0563 6035 71

    Flue gas analysis with no stress, paper or shaky probes – the testo 330i LX flue gas analyzer operated by smartphone App makes this possible. The smart anniversary set for measurements on gas, oil and solid fuel systems provides you with the testo 330i LX flue gas analyzer with O2 and CO H2-compensated sensor, along with additional practical accessories.
    • 5-year warranty without a maintenance contract on O2 and CO sensors

    • Included in the anniversary set: testo 330i LX flue gas analyzer, including O2 and CO H2-compensated sensor, Bluetooth® interface, USB mains unit, modular flue gas probe certified by the German Technical Safety Standards Authority (TÜV), testoFix probe mount, replacement dirt filter, and system case

    • Paperless documentation and report generation on site via free smartphone App

    • Operation independent of measuring location via smartphone App

  • testo 330i LX anniversary set - Flue gas analyzer (O2, CO) in a system case

    Order-Nr. 0563 6035 70

    Flue gas analysis with no stress, paper or shaky probes – the testo 330i LX flue gas analyzer operated by smartphone App makes this possible. The smart anniversary set for measurements on gas, oil and solid fuel systems provides you with the testo 330i LX flue gas analyzer with O2 and CO sensor, along with additional practical accessories.
    • 5-year warranty without a maintenance contract on O2 and CO sensors

    • Included in the anniversary set: testo 330i LX flue gas analyzer, including O2 and CO sensor, Bluetooth® interface, USB mains unit, basic flue gas probe, replacement dirt filter, and system case

    • Paperless documentation and report generation on site via smartphone App

    • Operation independent of measuring location via free smartphone App

  • testo 330i LX anniversary set - Flue gas analyzer (O2, CO H2-compensated) without a case

    Order-Nr. 0563 6035 72

    Flue gas analysis with no stress, paper or shaky probes – the testo 330i LX flue gas analyzer operated by smartphone App makes this possible. The smart anniversary set for measurements on gas, oil and solid fuel systems provides you with the testo 330i LX flue gas analyzer with O2 and CO H2-compensated sensor, along with additional practical accessories.
    • 5-year warranty without a maintenance contract on O2 and CO sensors

    • Included in the anniversary set: testo 330i LX flue gas analyzer, including O2 and CO H2-compensated sensor, Bluetooth® interface, USB mains unit, modular flue gas probe certified by the German Technical Safety Standards Authority (TÜV), replacement dirt filter, and combustion air temperature probe

    • Paperless documentation and report generation on site via free smartphone App

    • Operation independent of measuring location via smartphone App

  • testo 330i LX anniversary set - Flue gas analyzer (O2, CO, NO) in a system case

    Order-Nr. 0563 6035 74

    Flue gas analysis with no stress, paper or shaky probes – the testo 330i LX flue gas analyzer operated by smartphone App makes this possible. The smart anniversary set for measurements on gas, oil and solid fuel systems provides you with the testo 330i LX flue gas analyzer with O2, CO and NO sensor, along with additional practical accessories.
    • 5-year warranty without a maintenance contract on O2 and CO sensors

    • Included in the anniversary set: testo 330i LX flue gas analyzer, including O2, CO and NO sensor, Bluetooth® interface, USB mains unit, modular flue gas probe certified by the German Technical Safety Standards Authority (TÜV), replacement dirt filter, and system case

    • Paperless documentation and report generation on site via free smartphone App

    • Operation independent of measuring location via smartphone App

  • testo 330i LX anniversary set - Flue gas analyzer (O2, CO) and infrared thermometer in a system case

    Order-Nr. 0563 6035 73

    Flue gas analysis with no stress, paper or shaky probes – the testo 330i LX flue gas analyzer operated by smartphone App makes this possible. The smart anniversary set for measurements on gas, oil and solid fuel systems provides you with the testo 330i LX flue gas analyzer with practical accessories. The testo 805i infrared thermometer with smartphone operation is also included in the purchase.
    • 5-year warranty without a maintenance contract on flue gas analyzer O2 and CO sensors

    • Included in the anniversary set: testo 330i LX flue gas analyzer, including O2 and CO sensor, Bluetooth® interface, USB mains unit, basic flue gas probe, replacement dirt filter and the testo 805i infrared thermometer and system case

    • Paperless documentation and report generation on site via free smartphone Apps

    • Operation independent of measuring location via smartphone Apps

  • testo 330i LX anniversary set - Flue gas analyzer (O2, CO) in a system case

    Order-Nr. 0563 6035 75

    Flue gas analysis with no stress, paper or shaky probes – the testo 330i LX flue gas analyzer operated by smartphone App makes this possible. The smart anniversary set for measurements on gas, oil and solid fuel systems provides you with the testo 330i LX flue gas analyzer with O2 and CO sensor, along with additional practical accessories.
    • 5-year warranty without a maintenance contract on O2 and CO sensors

    • Included in the anniversary set: testo 330i LX flue gas analyzer, including O2 and CO sensor, Bluetooth® interface, USB mains unit, modular flue gas probe certified by the German Technical Safety Standards Authority (TÜV), testoFix probe mount, replacement dirt filter, and system case with a removable bottom insert

    • Paperless documentation and report generation on site via smartphone App

    • Operation independent of measuring location via smartphone App

  • testo 330i LX anniversary set - Flue gas analyzer (O2, CO H2-compensated) in a system case

    Order-Nr. 0563 6035 76

    Flue gas analysis with no stress, paper or shaky probes – the testo 330i LX flue gas analyzer operated by smartphone App makes this possible. The smart anniversary set for measurements on gas, oil and solid fuel systems provides you with the testo 330i LX flue gas analyzer with O2 and CO H2-compensated sensor, along with additional practical accessories.
    • 5-year warranty without a maintenance contract on O2 and CO sensors

    • Included in the anniversary set: testo 330i LX flue gas analyzer, including O2 and CO H2-compensated sensor, Bluetooth® interface, USB mains unit, modular flue gas probe tested and certified by the German Technical Safety Standards Authority (TÜV), replacement dirt filter, and system case

    • Paperless documentation and report generation on site via free smartphone App

    • Operation independent of measuring location via smartphone App

115 Products found
Show More