R & D

62 products or recommendations for R & D
  • Waterproof surface probe (NTC)

    Order-Nr. 0613 1912

    Thanks to its NTC sensor, the waterproof surface temperature probe delivers reliable, accurate measurement results even at low temperatures. For measurements on flat surfaces.
    • NTC temperature sensor

    • Measuring accuracy of up to ±0.2 °C

    • Ideal for measurements on refrigeration systems, in cold storage warehouses/rooms or outdoors

    • Measuring range: -50 to +150 °C

  • Waterproof immersion/penetration probe (NTC)

    Order-Nr. 0613 1212

    The waterproof immersion/penetration probe with NTC sensor records the temperature in liquids and semi-solid media quickly and accurately.
    • NTC temperature sensor

    • Waterproof

    • Measuring accuracy of up to ±0.2 °C

    • Measuring range: -50 to +150 °C

  • Thin humidity probe (Ø 4 mm) - for material moisture

    Order-Nr. 0636 2135

    The slim humidity probe measures material moisture via the equilibrium moisture content and can very easily be used in recesses or bore holes thanks to its slim design and remote electronics. The material moisture can also be determined directly in the instrument in combination with the testo 635 temperature and humidity measuring instrument.

     
    • Measurement of the material moisture via the equilibrium moisture content

    • Slim design (Ø 4 mm) with remote electronics – ideal for tight measuring points

  • testo ViPR - volatile particle remover for sampling and raw gas conditioning according to UNECE R83 and R49

    Order-Nr. 1122B

    The testo ViPR volatile particle remover is a gas conditioning system for sampling, dilution and conditioning of raw gas for particle determination. It is compliant with the method according to PMP (Particle Measurement Programme) and is characterized by its award-winning technology.
     
    • UNECE R83 and R49 compliant

    • Gas conditioning for particle number measurement for vehicle type approval

    • Primary diluter for direct connection to exhaust pipe or CVS dilution tunnel

    • Einfache Bedienung über PC

  • testo REXS - High mass soot generator

    Order-Nr. 366

    Reproducible EXhaust Simulator generates nano-sized soot particles which are very similar to diesel soot, and is fully automated. It is impressive thanks to its high mass output, ease of use and attractive cost-saving potential.
    • Combustion soot particles with similar mobility distribution to diesel emissions

    • Stable, reproducible particle size distribution with less than 5% deviation

    • 6 possible operation points with mode diameter between 30 nm and 120 nm

    • Stable operation even when there are changes in the absolute pressure due to increasing backpressure in loaded filters

  • testo NanoMet3 - portable nanoparticle counter for Real Driving Emissions (RDE)

    Order-Nr. 444

    The innovative testo NanoMet3 PN-PEMS (particle number, portable emission measurement system) enables you to measure vehicle Real Driving Emissions – RDE.
     
    • One-button operation

    • Gas conditioning: integrated PMP thermodilution

    • Measurement method for gasoline and diesel vehicles without any additional instrument settings

    • No need for any operating resources

  • testo DiSCmini - handheld measuring instrument for nanoparticle counting

    Order-Nr. 133

    Use the testo DiSCmini to monitor personal exposure to ultrafine particles (UFP) in work areas or to toxic pollutants such as diesel soot. This will enable you to minimize any risks to health.
    • Measurement and display of particle number, mean particle diameter and LSDA (Lung Deposited Surface Area) with a time resolution of 1 second.

    • Operation without solvents or radioactive radiation sources

    • Insensitive to vibrations, and operation is possible in any position

    • Long battery lifetimes of up to 8 hours

  • Temperature probe with Velcro (NTC)

    Order-Nr. 0613 4611

    Temperature probe with Velcro for surface measurements on pipes
    • With Velcro: makes it easy to attach the surface probe to pipes with a pipe diameter of up to 75 mm

    • NTC temperature probe with cable

    • Measuring range: -50 to +70 °C

  • Temperature probe with magnet (TC Type K)

    Order-Nr. 0602 4892

    Temperature probe with magnet for surface measurements on metal surfaces
    • Self-adhesive thanks to a magnet: probe for measuring surface temperature on metal surfaces

    • TC Type K temperature probe with 1.6 m cable

    • Measuring range: -50 to +400 °C

  • Temperature probe with clamping bracket (TC Type K)

    Order-Nr. 0602 4592

     Pipe wrap probe for pipe diameter 5 to 65 mm, with exchangeable measuring head. Meas. range short-term up to +280°C, TC Type K 
    • With clamping bracket: enables quick, easy attachment of the probe to pipes with a diameter of 5 to 65 mm

    • TC Type K temperature probe with 1.2 m cable

    • Measuring range: -60 to +130 °C, briefly up to +280 °C

  • Surface probe with widened measuring tip (TC type K)

    Order-Nr. 0602 1993

    Waterproof, robust and versatile: this temperature probe with sturdy probe shaft and widened measuring tip is ideal for measuring the temperature on flat surfaces.
    • Extra-wide measuring tip for flat surfaces

    • Thermocouple type K

    • Waterproof and robust (sturdy probe shaft)

    • Measuring range: -60 to +400 °C

  • Surface probe with a small measuring head (TC type K)

    Order-Nr. 0602 0693

    Accurate, waterproof and versatile: the temperature probe measures surface temperatures of up to 1000 °C. Its small measuring head is ideal for carrying out measurements on flat surfaces. Short response time.
    • Low-mass probe: very short response time for accurate measurement results

    • Thermocouple type K

    • Waterproof

    • Very large measuring range: -60 °C to +1000 °C

  • Standard humidity/temperature probe (Ø 21 mm)

    Order-Nr. 0636 9740

    The standard humidity/temperature probe means you can check the indoor air climate quickly and reliably.
    • Probe shaft diameter of 21 mm

    • Fast response time for air temperature measurement

    • Temperature measuring range: -20 to +70 °C

  • Spare meas. head for pipe wrap probe, TC Type K

    Order-Nr. 0602 0092

    Spare meas. head for pipe wrap probe, TC Type K
    • Replaceable measuring head with thermocouple strip for temperature probe with clamping bracket 0602 4592

    • Measuring range: -60 to +130°C, briefly up to +280 °C

    • Simple pull out the old measuring head with thermocouple strip and replace with new measuring head

62 Products found
Show More