Facility Management

106 products or recommendations for Facility Management
  • testo fast printer IRDA

    Order-Nr. 0554 0549

    Use the printer with IRDA and infrared interface for fast and reliable documentation of readings.
    • Documentation of readings in black and white

    • Fast data transfer within 2 seconds

    • Out-off function

  • International mains unit

    Order-Nr. 0554 1096

    Use the mains unit for mains operation of your measuring instrument or for battery charging in the instrument. It is suitable for international use.
    • For mains operation or charging batteries in the instrument

    • 100-240 V AC / 6.3 V DC

  • testovent 417 - funnel set for volume flow measurement

    Order-Nr. 0563 4170

    Use the testovent 417 funnel set (in conjunction with the appropriate measuring equipment) for measuring the volume flow at ventilation grilles and plate outlets quickly and conveniently.
    • Convenient, quick volume flow measurement

    • With the funnel set, the time-consuming loop method is a thing of the past

    • Suitable for outlets up to 300 x 300 mm

    • Easy to assemble

  • Connection hose, silicone

    Order-Nr. 0554 0440

    Use the connection hose to connect suitable Pitot tubes and pressure probes with one another. The hose is made of silicone and has a max. load capacity of up to 700 hPa (mbar).
    • For the connection of Pitot tube and pressure probe

    • Length of 5 m

  • Bluetooth®/IRDA printer

    Order-Nr. 0554 0620

    Using the printer you can print out graphs and measurement data from compatible Testo measuring instruments or Testo Apps.
    • Bluetooth & IRDA interface in one printer

    • Print out of international characters e.g. asian characters

    • Rechargeable battery

    • Coloured LEDs to display status of printer

  • Spare head for leak detector - for CFC, HFC (partially and fully halogenated), H2

    Order-Nr. 0554 3180

    Use this spare head for all common refrigerants CFC, HFC (partially and fully halogenated) and H2 to easily replace the sensor head on your leak detector.
    • Spare head for all common refrigerants CFC, HFC (partially and fully halogenated), H2

    • Extremely high sensitivity of ˂3g/a enables detection of even the smallest leaks

    • Easy sensor head replacement

    ₱10 085.00
    excl. VAT
  • testo Smart Case (Climate) - storage case for Smart Probes measuring instruments

    Order-Nr. 0516 0260

    Robust on the outside, soft on the inside: the testo Smart Case “VAC” with a hard outer shell and integrated foam insert with compartments for a precise fit. You can use it to safely store and transport your Smart Probes testo 805i, testo 410i, testo 510i, testo 405i, testo 605i and testo 905i measuring instruments.
    • Practical storage case for Smart Probes testo 805i, testo 410i, testo 510i, testo 405i, testo 605i and testo 905i (available separately)

    • Outer: impact-resistant, flexible hard shell with zip 

    • Inner: protective foam insert with precise-fit compartments for each measuring instrument

    • Compact dimensions: 270 x 190 x 60 mm

    ₱2 275.00
    excl. VAT
  • Transport bag

    Order-Nr. 0590 0017

    You can securely store your measuring instrument and accessories in the robust transport bag with a hard outer shell. The two internal mesh compartments ensure the stored items are properly held in place.
    • Outside: impact-resistant transport bag with zip fastener

    • Inside: two mesh compartments

    • Dimensions: 270 x 150 x 75 mm

  • Flexible probe shaft for attachment to modular flue gas probes

    Order-Nr. 0554 9770

    Our flexible probe shaft helps you to carry out flue gas measurements even on difficult-to-access measurement apertures. Since the probe shaft is made of very flexible plastic, you can easily bend it, allowing it to be inserted into exhaust flues which are obstructed (e.g. by sloping ceilings).
    • For flue gas measurements on heating system burners

    • Extremely flexible plastic probe shaft

    • Used for measurements at difficult-to-access measurement sites

    • Attachable to modular flue gas probes

  • Humidity module for testo 625 and radio handles

    Order-Nr. 0636 9725

    Humidity module for attachment to the testo 625 thermohygrometer and Testo radio handles.
    • Can be attached to the testo 625 thermohygrometer and Testo radio handles (both available to order separately)

    • For wireless humidity measurements (with radio handle)

    • Temperature measuring range: -10 to +60 °C

    ₱9 479.00
    excl. VAT
106 Products found
Show More