Parameters

149 products or recommendations for Parameters
  • External sample gas conditioner

    Order-Nr. 0554 3501

    You can rely on accurate measurement results, even when carrying out measurements on very humid flue gas. With the gas cooler, you can easily minimize measurement inaccuracies due to water vapour.
    • Reduction of exhaust gas humidity increases measurement accuracy

    • Small design and low weight thanks to sophisticated gas path

    • Fast readiness thanks to easy connection and commissioning

    • Operation independently of power grid thanks to rechargeable powerbank
       

  • USB interface for data loggers

    Order-Nr. 0572 0500

    Use the USB interface to transmit the data logger's readings to the PC. Using the latest version of the testo ComSoft software, you can read out and analyze the readings - and you can also programme the data logger individually.
    • For transferring readings to your PC

    ₱7 966.00
    excl. VAT
  • testovent 417 - funnel set for volume flow measurement

    Order-Nr. 0563 4170

    Use the testovent 417 funnel set (in conjunction with the appropriate measuring equipment) for measuring the volume flow at ventilation grilles and plate outlets quickly and conveniently.
    • Convenient, quick volume flow measurement

    • With the funnel set, the time-consuming loop method is a thing of the past

    • Suitable for outlets up to 300 x 300 mm

    • Easy to assemble

  • Connection hose, silicone

    Order-Nr. 0554 0440

    Use the connection hose to connect suitable Pitot tubes and pressure probes with one another. The hose is made of silicone and has a max. load capacity of up to 700 hPa (mbar).
    • For the connection of Pitot tube and pressure probe

    • Length of 5 m

  • pH buffer solution 4.01

    Order-Nr. 0554 2061

    The pH buffer solution 4.01 enables you to calibrate and adjust your pH measuring instruments.
    • Buffer solution with 4.01 pH value in practical dosing bottle

    • For calibration and adjustment of pH measuring instruments

    ₱1 415.00
    excl. VAT
  • Transport case

    Order-Nr. 0516 3510

    Store your equipment securely in the robust transport case: the case provides enough storage space for the appropriate measuring instrument, probes and accessories.
    • Can be used between plug-in head cable and instrument

  • pH buffer solution 7.00

    Order-Nr. 0554 2063

    The pH buffer solution 7.00 enables you to calibrate and adjust your pH measuring instruments.
    • Buffer solution with 7.00 pH value in practical dosing bottle

    • For calibration and adjustment of pH measuring instruments

    ₱1 415.00
    excl. VAT
  • Spare head for leak detector - for CFC, HFC (partially and fully halogenated), H2

    Order-Nr. 0554 3180

    Use this spare head for all common refrigerants CFC, HFC (partially and fully halogenated) and H2 to easily replace the sensor head on your leak detector.
    • Spare head for all common refrigerants CFC, HFC (partially and fully halogenated), H2

    • Extremely high sensitivity of ˂3g/a enables detection of even the smallest leaks

    • Easy sensor head replacement

    ₱10 085.00
    excl. VAT
  • Alarm module (visual + acoustic)

    Order-Nr. 0572 9999

    Alarm module (visual + acoustic), can be connected to base alarm relay. Ø 70 × 164 mm, 24 V AC/DC/320 mA, steady red light, continuous tone: Buzzer approx. 2.4 kHz (mains unit 0554 1749 required).
  • Emission tape - for measurements on reflective surfaces

    Order-Nr. 0554 0051

    Use the emission tape when you are using your thermal imager to measure on reflective surfaces, for example metal.
    • Tape for measurements on reflective surfaces

    • Temperature-resistant up to +250 °C

    • Emissivity (ɛ) of 0.95

    ₱6 958.00
    excl. VAT
149 Products found
Show More