Accessories - Probe accessories

51 products or recommendations for Accessories - Probe accessories
  • testovent 417 - funnel set for volume flow measurement

    Order-Nr. 0563 4170

    Use the testovent 417 funnel set (in conjunction with the appropriate measuring equipment) for measuring the volume flow at ventilation grilles and plate outlets quickly and conveniently.
    • Convenient, quick volume flow measurement

    • With the funnel set, the time-consuming loop method is a thing of the past

    • Suitable for outlets up to 300 x 300 mm

    • Easy to assemble

    SR700.00
    excl. VAT
  • Flexible probe shaft for attachment to modular flue gas probes

    Order-Nr. 0554 9770

    Our flexible probe shaft helps you to carry out flue gas measurements even on difficult-to-access measurement apertures. Since the probe shaft is made of very flexible plastic, you can easily bend it, allowing it to be inserted into exhaust flues which are obstructed (e.g. by sloping ceilings).
    • For flue gas measurements on heating system burners

    • Extremely flexible plastic probe shaft

    • Used for measurements at difficult-to-access measurement sites

    • Attachable to modular flue gas probes

    SR748.00
    excl. VAT
  • Humidity module for testo 625 and radio handles

    Order-Nr. 0636 9725

    Humidity module for attachment to the testo 625 thermohygrometer and Testo radio handles.
    • Can be attached to the testo 625 thermohygrometer and Testo radio handles (both available to order separately)

    • For wireless humidity measurements (with radio handle)

    • Temperature measuring range: -10 to +60 °C

    SR414.00
    excl. VAT
  • testovent 417

    Order-Nr. 0554 4172

    Flow straightener testovent 417
    • More accurate volume flow measurement independent of the swirl direction

    • Reliable measurement results on swirl outlets

    • Flow straightener retrofittable for existing Testo funnels sets

    SR392.00
    excl. VAT
  • Clamp meter adapter - for non-contact current measurement

    Order-Nr. 0590 0003

    The clamp meter adapter means you can take advantage of non-contact current measurement (with the testo 760-2/-3 digital multimeter). The clamp meter adapter is particularly suitable for measurement on tightly packed power cables or conductors with a small diameter.
    • Fully retractable pincer arm – ideal for measurements in tight places

    • Direct / alternating current measurement up to 400 A AC/DC possible

    • Display of 1 mV per A

    • Overvoltage category CAT IV 600 V

    SR440.00
    excl. VAT
  • Adapter for type K thermocouples

    Order-Nr. 0590 0021

    Use the thermocouple adapter when you want to attach a thermocouple temperature probe to your testo 770-2/-3 clamp meter.
    • For attaching type K thermocouple temperature probes

    • Measuring range -20 to +500°C

    SR110.00
    excl. VAT
  • testovent 417 - flow straightener set for volume flow

    Order-Nr. 0554 4173

    The flow straightener set with the patented testovent 417 volume flow straightener and two funnels (in conjunction with the appropriate measuring equipment) offers you ideal assistance when measuring the volume flow at swirl outlets.
    • Convenient, quick volume flow measurement

    • Accurate measurement even in turbulent flows

    • Patented volume flow straightener

    • Included in the set: volume flow straightener, two funnels and a practical case

    SR1 008.00
    excl. VAT
  • Standard measuring cables (angled plug) - tip Ø: 2 mm

    Order-Nr. 0590 0010

    Rubber-coated grips mean the standard measuring cables ensure a secure hold when measuring electrical parameters. The standard measuring cables can be attached to Testo clamp meters, Testo digital multimeters or other makes of multimeter.
    • CAT II 1000 V measurement category

    • Tip Ø: 2 mm; tip length: 18 mm

    • 1 set of measuring cables with angled plug

    SR84.00
    excl. VAT
  • Spare measuring head for pipe wrap probes (TC type K)

    Order-Nr. 0602 0092

    The spare measuring head for pipe wrap probes (TC type K) enables easy and fast replacement of your old measuring head, for example in the event of damage.
    • Replaceable measuring head with thermocouple strip for temperature probe with clamping bracket 0602 4592

    • Measuring range: -60 to +130°C, briefly up to +280 °C

    • Simple pull out the old measuring head with thermocouple strip and replace with new measuring head

    • Thermocouple type K

    SR198.00
    excl. VAT
  • Safety crocodile clips - 1 set

    Order-Nr. 0590 0008

    Use the handy safety crocodile clips for easy measurement of electrical parameters. Simply put the measuring cables into the safety crocodile clip to carry out the measurement. This means your hands are free for other tasks.
    • CAT III 600 V measurement category

    • Maximum current: 10 A

    • For attachment onto Testo standard measuring cables (order-number 0590 0011; 0590 0012; 0590 0013; 0590 0014) or other makes of measuring cables

    • Delivery quantity: 1 set of safety crocodile clips

    SR84.00
    excl. VAT
  • Magnetic suspension system for digital multimeters

    Order-Nr. 0590 0001

    This magnetic suspension system enables you to attach your testo 760 digital multimeter to systems in a really simple way.
    • Fast attachment of digital multimeters, e.g. onto switching cabinets

    • Both hands free for measurement thanks to the magnetic suspension system

    SR88.00
    excl. VAT
51 Products found
Show More