- Home
- testo 300 Longlife kit
0564 3004 85
testo 300 Longlife kit - flue gas analyzer (O2, CO H2-compensated up to 30,000 ppm)
0564 3004 85
testo 300 Longlife kit - flue gas analyzer (O2, CO H2-compensated up to 30,000 ppm)
Carry out installation and maintenance work on heating systems several times a day using the flue gas analyzer with Longlife sensors. The TÜV-tested testo 300 Longlife flue gas analyzer is supplied with O2 and CO H2-compensated sensor up to 30,000 ppm, TÜV-tested modular flue gas probe, case and practical accessories.
- Including O2, CO H2-compensated sensor up to 30,000 ppm
- In the kit: testo 300 Longlife flue gas analyzer, including O2 and CO H2-compensated sensor up to 30,000 ppm, mains unit, modular flue gas probe, spare dirt filters, spare thermal paper, EasyHeat software, case
Temperature - TC Type K (NiCr-Ni)
Temperature - TC Type K (NiCr-Ni) | Measuring range -40 to +1200 °C |
|---|---|
Accuracy ±0.5 % of mv (Remaining Range) ±0.5 °C (0.0 to +100.0 °C) | |
Resolution 1 °C (Remaining Range) 0.1 °C (-40 to +999.9 °C) | |
Differential Pressure - Piezoresistive
Differential Pressure - Piezoresistive | Measuring range -100 to +200 hPa |
|---|---|
Accuracy ±1 % of mv (+50.1 to +100.0 hPa) ±0.5 hPa (0 to +50.0 hPa) ±1.5 % of mv (+100.1 to +200 hPa) | |
Resolution 0.01 hPa | |
Flue gas O₂
Flue gas O₂ | Measuring range 0 to 21 Vol.% |
|---|---|
Accuracy ±0.2 Vol.% | |
Resolution 0.1 Vol.% | |
Flue gas COlow (with H₂-compensation)
Flue gas COlow (with H₂-compensation) | Measuring range 0 to 500 ppm |
|---|---|
Accuracy ±5 Remaining Range ±2 (40 to +500 ) | |
Resolution 0.1 ppm | |
CO determination (with H₂-compensation), automatic dilution
CO determination (with H₂-compensation), automatic dilution | Measuring range 0 to 30000 ppm |
|---|---|
Accuracy ±100 ppm or ±10 % of mv | |
Resolution 1 ppm | |
Flue gas Nolow
Flue gas Nolow | Measuring range 0 to 300 ppm |
|---|---|
Accuracy ±5 % of mv (40 to 300 ppm) ±2 ppm (0 to +39.9 ppm) | |
Resolution 0.1 ppm | |
Differential Pressure flue gas Draught - Piezoresistive
Differential Pressure flue gas Draught - Piezoresistive | Measuring range -9.99 to +40 hPa |
|---|---|
Accuracy ±0.02 hPa (0.1 to +3.00 hPa) ±1.5 % of mv (+3.01 to +40 hPa) ±0.005 hPa (0 to 0.1 hPa) | |
Resolution 0.001 hPa (0 to 0.1 hPa) 0.01 hPa (Remaining Range) | |
Flue gas degree of effectivity, Eta (calculated)
Flue gas degree of effectivity, Eta (calculated) | Measuring range 0 to 120 % |
|---|---|
Resolution 0.1 % | |
Flue gas loss (calculated)
Flue gas loss (calculated) | Measuring range 0 to 99.9 % |
|---|---|
Resolution 0.1 % | |
Flue gas CO₂ calculation (calculated from O₂)
Flue gas CO₂ calculation (calculated from O₂) | Measuring range Display range 0 to CO₂ max |
|---|---|
Accuracy ±0.2 Vol.% | |
Resolution 0.1 Vol.% | |
Ambient CO
Ambient CO | Measuring range 0 to 2000 ppm |
|---|---|
Accuracy ±10 % of mv (101 to 2000 ppm) ±10 ppm (0 to 100 ppm) | |
Resolution 1 ppm | |
Differential Pressure 4 Pa measurement - Piezoresistive
Differential Pressure 4 Pa measurement - Piezoresistive | Measuring range -50 to +50 Pa |
|---|---|
Accuracy ±0.3 Pa (< 10 Pa) ±3 % of mv (Remaining Range) | |
Resolution 0.1 hPa | |
General technical data
General technical data | Operating humidity 15 to 90 %RH non-condensing |
|---|---|
Weight approximately 800 g | |
Dimensions 244 (including probe connection) x 98 x 59 mm (LxWxH) | |
Operating temperature -5 to +45 °C | |
Protection class IP40 | |
Product colour black/orange | |
Display type 5.0" touch display, HD 1280*720 pixels, IPS (160 k) | |
Power supply Rechargeable battery, USB mains unit | |
Warranty conditions https://www.testo.com/guarantee | |
Authorizations TÜV-tested according to 1st German Federal Immission Control Ordinance (BImSchV) EN 50379, Parts 1-3 | |
Guarantee Gas sensors (O₂, CO) 48 months; Thermocouple 12 months; rechargeable battery: 12 months; NO, NOlow, COlow sensor 24 months | |
Memory 1,000,000 measuring values | |
Battery life 10 h | |
Storage battery type Lithium ion battery | |
Storage temperature -20 to +50 °C | |
Charging temperature 0 to +45 °C | |
- testo 300 Longlife flue gas analyzer with O2 and CO H2-compensated sensor up to 30,000 ppm (0633 3004 81)
- USB mains unit, including cable (0554 1106)
- Modular flue gas probe, 180 mm; Ø 8 mm; Tmax 500°C; TÜV-tested; 2.2 m hose (0600 9760)
- Spare dirt filters for modular flue gas probe; 10 off (0554 3385)
- EasyHeat PC software (0554 3332)
- Instrument case (height: 130 mm) for instrument, probes and accessories (0516 3300)
- USB driver for the following devices with USB port: * USB Interface testo 174 / 177 - T + H * testo 300 / 320 / 330 / 330i / 335 / 340 / 350 * testo 435 * testo 556 / 560 / 570 / 580 * testo 635 * testo 735 * testo 845
- The Testo ZIV driver is used to connect the testo 300, testo 320 and testo 330 measuring instruments to an application program (sweeping district administration program) according to the interface defined by the Zentralverband des Schornsteinfegerhandwerks (ZIV, Central Association of Chimney Sweeps) in version 1.0 of 01. August 2012, in version 2.0 of 13. February 2017 as well as version 3.0 from 02. July 2021. Please check with the manufacturer of your application program as to whether this interface is supported.