logo
  1. Home
  2. testo 330-2 LL (O2 and COH2) flue gas set for service techni...

testo 330-2 LL (O2 and COH2) flue gas set for service techni...

0563 3372 71
    • testo 330-2 LL (O2 and COH2) flue gas set for service technicians and inspectors, incl.BLUETOOTH, rech. battery and calibration protocol; mains unit 100-240 V for mains operation or charging the rechargeable battery in the instrument; combustion air temperature probe, length 190 mm; Testo BLUETOOTH printer with mains unit; easyheat software testo 330 for PC; USB connection cable, instrument-PC; flue gas probe, length 300 mm, Ø 8 mm, Tmax. 500 °C; fine pressure probe; capillary hoses; surface probe angled 90 °C; connection cable surface probe; straight Pitot tube; heating check retrofit CD; basic system case with double floor for instrument, probes and further accessories

    General technical data

    Weight
    600 g (without rechargeable battery)
    Dimensions
    270 x 90 x 65 mm
    Operating temperature
    -5 to +45 °C
    Display size
    240 x 320 pixels
    Display function
    Colour graphic display
    Power supply
    Rechargeable battery pack 3.7 V / 2.6 Ah; Mains unit 6 V / 1.2 A
    Maximum memory
    500,000 readings
    Storage temperature
    -20 to +50 °C

    Differential Pressure - Piezoresistive

    Measuring range
    ±10000 Pa
    Accuracy
    ±0.3 Pa (0 to 9.99 Pa) plus ±1 Digit
    ±3 Pa (10 to 10000 Pa) plus ±1 Digit

    Flue gas O₂

    Measuring range
    0 to 21 Vol.%
    Accuracy
    ±0.2 Vol.%
    Resolution
    0.1 Vol.%
    Reaction time t₉₀
    < 20 s

    • Instruction manual EasyHeat software(pdf, 3.55 MB)
    • Testo ZIV driver ZIV 2000 for testo 320 and testo 330(v2.1, 2.22 MB)
      Testo ZIV driver in the 2000 version. The Testo ZIV driver is used to connect the testo 320 and testo 330 measuring instruments to an application program (sweeping district administration program) according to the interface Version 2.0 defined by the Zentralverband des Schornsteinfegerhandwerks (Central Association of Chimney Sweeps, ZIV). Please check with the manufacturer of your application program as to whether this interface is supported. If Microsoft .NET Framework 4.0 has not been installed on the computer, it must be downloaded from the Microsoft website and installed on the system.
    • Testo ZIV driver for testo 300, testo 320 and testo 330(v2.3, 64.11 MB)
      The Testo ZIV driver is used to connect the testo 300, testo 320 and testo 330 measuring instruments to an application program (sweeping district administration program) according to the interface defined by the Zentralverband des Schornsteinfegerhandwerks (ZIV, Central Association of Chimney Sweeps) in version 1.0 of 01. August 2012, in version 2.0 of 13. February 2017 as well as version 3.0 from 02. July 2021. Please check with the manufacturer of your application program as to whether this interface is supported.
    • Update-Kit / Bootloader(V1.22, 1.24 MB)
      (testo 330 LL | testo 330i | testo 350 Control Unit + Analysis Box | testo 320)
      If the firmware update does not start under Windows 8.1 or Windows 10, a new bootloader must be installed on the measuring device once.