Professional flue gas analysis with testo 330-1/-2

Are you only happy with the best – especially when it comes to your tools? Then, you should get to know the testo 330-1 LX and testo 330-2 LX. Because there are basically hardly any measuring tasks on heating systems that these flue gas analyzers are not capable of dealing with. And control via App, integrated protection of sensors against wear and an extended sensor warranty make it clear why both instruments are among our bestsellers.
Ideal for: day-to-day maintenance, troubleshooting and limit value checks

7 products or recommendations for Professional flue gas analysis with testo 330-1/-2
  • testo 330-2 LX anniversary set - Flue gas analyzer (O2, CO H2-compensated) with printer in a system case

    Order-Nr. 0563 6034 71

    With this anniversary set you will be equipped to take the most important measurements relating to heating systems: The testo 330-2 LX flue gas analyzer tested and certified by the German Technical Safety Standards Authority (TÜV) is supplied with an O2 and CO H2-compensated sensor, TÜV tested and certified modular flue gas probe, testo fast printer, system case, and other practical accessories.

    • 5-year warranty without a maintenance contract on O2 and CO sensors

    • Included in the anniversary set: TÜV tested and certified testo 330-2 LX flue gas analyzer including O2 and CO H2-compensated sensor, Bluetooth® interface, mains unit, TÜV tested and certified modular flue gas probe, replacement dirt filter, testo fast printer, replacement thermal paper and system case

    • testo 330-2 LX flue gas analyzer with fresh air valve to protect the CO measuring cell and to extend the CO measuring range to 30,000 ppm

    • Single-hose connection: just one hand movement is needed to securely connect all the channels for flue gas measurement (gas paths, draught, temperature probe integrated into the flue gas probe)

  • testo 330-2 LX anniversary set - Flue gas analyzer (O2, CO H2-compensated) in a system case

    Order-Nr. 0563 6034 70

    With this anniversary set you will be equipped to take the most important measurements relating to heating systems: The testo 330-2 LX flue gas analyzer tested and certified by the German Technical Safety Standards Authority (TÜV) is supplied with an O2 and CO H2-compensated sensor, TÜV tested and certified modular flue gas probe, system case, and other practical accessories.

    • 5-year warranty without a maintenance contract on O2 and CO sensors

    • Included in the anniversary set: TÜV tested and certified testo 330-2 LX flue gas analyzer, including O2 and CO H2-compensated sensor, Bluetooth® interface, mains unit, TÜV tested and certified modular flue gas probe, replacement dirt filter and system case

    • testo 330-2 LX flue gas analyzer with fresh air valve to protect the CO measuring cell and to extend the CO measuring range to 30,000 ppm

    • Single-hose connection: just one hand movement is needed to securely connect all the channels for flue gas measurement (gas paths, draught, temperature probe integrated into the flue gas probe)

  • testo 330-1 LX anniversary set - Flue gas analyzer (O2, CO) in a system case
     

    Order-Nr. 0563 6033 70

    This anniversary set means you have the appropriate equipment ready to hand and can get down to work straight away: the set with testo 330-1 LX flue gas analyzer, basic flue gas probe, system case and practical accessories is ideal for customer service and maintenance engineers.
     

    • 5-year warranty without maintenance contract on O2 and CO sensors

    • Included in the anniversary set: TÜV-tested testo 330-1 LX flue gas analyzer incl. O2 and CO sensor, Bluetooth® interface, mains unit, basic flue gas probe, spare dirt filters and system case

    • TÜV-tested flue gas analyzer according to 1st German Federal Immission Control Ordinance (BImSchV) and EN 50379, Parts 1 to 3

    • Long-life sensors with up to 6 years' service life

  • testo 330-1 LX anniversary set - Flue gas analyzer (O2, CO) with printer in a system case

     

    Order-Nr. 0563 6033 71

    This anniversary set means you have the appropriate equipment ready to hand and can get down to work straight away: the set with testo 330-1 LX flue gas analyzer, basic flue gas probe, testo fast printer, system case and practical accessories is ideal for customer service and maintenance engineers.

     

    • 5-year warranty without maintenance contract on O2 and CO sensors

    • Included in the anniversary set: TÜV-tested testo 330-1 LX flue gas analyzer incl. O2 and CO sensor, Bluetooth® interface, mains unit, basic flue gas probe, spare dirt filters, Testo fast printer, spare thermal paper and system case

    • TÜV-tested flue gas analyzer according to 1st German Federal Immission Control Ordinance (BImSchV) and EN 50379, Parts 1 to 3

    • Long-life sensors with up to 6 years' service life

  • testo 330-2 LL - Professional long-life set for customer service and service engineers

    Order-Nr. 0563 3371 78

    Ready to get started on the most important tasks involved in flue gas analysis on oil, gas and solid fuel systems: the testo 330-2 LL professional long-life set offers the possibility of flue gas measurement, draught, pressure and ambient CO/CO2 measurements, differential temperature measurement and gas leak detection. You get practical accessories in the flue gas analysis set (flue gas probe, hose connection set, Bluetooth printer, etc.).

    • 330-2 LL flue gas analyzer with fresh air valve to protect the CO measuring cell and to extend the CO measuring range to 30,000 ppm 

    • 4-year warranty on the probes which users can change themselves, including sensor monitoring with a service life of up to 6 years

    • Single-hose connection: just one hand movement is needed to securely connect all the channels for flue gas measurement (gas paths, draught, temperature probe integrated into the flue gas probe)

    • TÜV-tested according to 1st German Federal Immission Control Ordinance (BImSchV) EN 50379, Parts 1-3

  • testo 330-1 LL - Flue gas analysis set with Bluetooth

    Order-Nr. 0563 3371 75

    This flue gas analysis set with Bluetooth means you have the appropriate equipment ready to hand and can get down to work straight away: the set has the testo 330-1 LL flue gas analyzer, case and practical accessories and is ideal for customer service and maintenance engineers.

    • Included in the set: TÜV-tested testo 330-1 LL flue gas analyzer, including O2 and CO H2-compensated sensor, Bluetooth interface, mains unit, TÜV-tested modular flue gas probe, combustion air temperature probe, pressure connection set, testo BLUETOOTH® printer and professional instrument case

    • TÜV-tested flue gas analyzer according to 1st German Federal Immission Control Ordinance (BImSchV) and EN 50379, Parts 1 to 3

    • Long-life sensors with up to 6 years' service life

    • 4-year warranty without maintenance contract

7 Products found