testo 330-2 LL (O2 and COH2) flue gas set for service technicians and inspectors, incl.BLUETOOTH, rech. battery and calibration protocol; mains unit 100-240 V for mains operation or charging the rechargeable battery in the instrument; combustion air temperature probe, length 190 mm; Testo BLUETOOTH printer with mains unit; easyheat software testo 330 for PC; USB connection cable, instrument-PC; flue gas probe, length 300 mm, Ø 8 mm, Tmax. 500 °C; fine pressure probe; capillary hoses; surface probe angled 90 °C; connection cable surface probe; straight Pitot tube; heating check retrofit CD; basic system case with double floor for instrument, probes and further accessories
testo 330-2 LL (O2 and COH2) flue gas set for service techni...
Order-Nr. 0563 3372 72
| Differential Pressure - Piezoresistive | |
|---|---|
Measuring range |
±10000 Pa |
Accuracy |
±0.3 Pa (0 to 9.99 Pa) t3 ±3 % of mv (10 to 10000 Pa) t3 |
| Flue gas O₂ | |
|---|---|
Measuring range |
0 to 21 Vol.% |
Accuracy |
±0.2 Vol.% |
Resolution |
0.1 Vol.% |
Reaction time t₉₀ |
< 20 s |
| Flue gas CO (with H₂-compensation) | |
|---|---|
Measuring range |
0 to 8000 ppm |
Accuracy |
±10 ppm or ±10 % of mv (0 to 200 ppm) ±20 ppm or ±5 % of mv (201 to 2000 ppm) ±10 % of mv (2001 to 8000 ppm) |
Resolution |
1 ppm |
Reaction time t₉₀ |
< 60 s |
Measuring rate |
0 to 500 ppm |
| Flue gas COlow | |
|---|---|
Measuring range |
0 to 500 ppm |
Accuracy |
±2 ppm (0 to 3990.0 ppm) ±5 % of mv (40 to 500 ppm) |
Resolution |
1.0 ppm |
Reaction time t₉₀ |
< 40 s |
| Flue gas NO | |
|---|---|
Measuring range |
0 to 3000 ppm |
Accuracy |
±5 ppm (0 to 100 ppm) ±5 (101 to 2000 ppm) ±10 % of mv (2001 t1 3000 ppm) |
Resolution |
1 ppm |
Reaction time t₉₀ |
< 30 s |
| Flue gas Nolow | |
|---|---|
Measuring range |
0 to 300 ppm |
Accuracy |
±2 ppm (0 to 39.9 ppm) ±5 % of mv (40 to 300 ppm) |
Resolution |
0.1 ppm |
Reaction time t₉₀ |
< 30 s |
| Differential Pressure flue gas Draught - Piezoresistive | |
|---|---|
Measuring range |
-9.99 to +40 hPa |
Accuracy |
±0.02 hPa or ±5 % of mv (-0.50 to +0.60 hPa) ±0.03 hPa (+0.61 to +3.00 hPa) ±1.5 % of mv (+3.01 to +40.00 hPa) |
Resolution |
0.01 hPa |
| Temperature | |
|---|---|
Measuring range |
-40 to +1200 °C |
Accuracy |
±0.5 °C (0 to +100.0 °C) ±0.5 % of mv (Remaining Range) |
Resolution |
0.1 °C (-40 to +999.9 °C) 1 °C (> +1000 °C) |
| Flue gas degree of effectivity, Eta (calculated) | |
|---|---|
Measuring range |
0 to 120 % |
Resolution |
0.1 % |
| Flue gas loss (calculated) | |
|---|---|
Measuring range |
0 to 99.9 % |
Resolution |
0.1 % |
| Flue gas CO₂ calculation (calculated from O₂) | |
|---|---|
Measuring range |
0 to CO₂ max (Display range) |
Accuracy |
±0.2 Vol.% |
Resolution |
0.1 Vol.% |
Reaction time t₉₀ |
< 40 s |
| Velocity / Volume flow | |
|---|---|
Measuring range |
0.15 to 3 m/s |
Resolution |
0.1 m/s |
| Pressure measurement | |
|---|---|
Measuring range |
0 to +300 hPa |
Accuracy |
±0.5 hPa (0.0 to 50.0 hPa) ±1 % of mv (50.1 to 100.0 hPa) ±1.5 % of mv (Remaining Range) |
Resolution |
0.1 hPa |
| Flue gas CO (without H₂-compensation) | |
|---|---|
Measuring range |
0 to 4000 ppm |
Accuracy |
±20 ppm (0 t1 400 ppm) ±5 % of mv (401 to 2000 ppm) ±10 % of mv (2001 to 4000 ppm) |
Resolution |
1 ppm |
Reaction time t₉₀ |
< 60 s |
| Ambient CO | |
|---|---|
Measuring range |
0 to 500 ppm |
Accuracy |
±5 ppm (0 to 100 ppm) ±5 % of mv (> 100 ppm) |
Resolution |
1 ppm |
Reaction time |
Approx. 35 s |
with CO probe
| Ambient CO₂ | |
|---|---|
Measuring range |
0 to 1 Vol.% 0 to 10000 ppm |
Accuracy |
±50 ppm or ±2 % of mv (0 to 5000 ppm) ±100 ppm or ±3 % of mv (5001 to 10000 ppm) |
Reaction time |
Approx. 35 |
with ambient CO₂ probe
| Gas leak measurement for combustible gases (via gas leak detection probe) | |
|---|---|
Measuring range |
0 to 10000 ppm CH₄ / C₃H₈; Display range |
Accuracy |
Signal optical display (LED) audible signal via buzzer |
Reaction time t₉₀ |
< 2 s |
with gas leak detection probe
| Temperature (via the fine pressure probe) | |
|---|---|
Measuring range |
-40 to +1200 °C max. (dependent on probe) |
Accuracy |
±0.5 °C (-40 to 100 °C) ±0.5 % of mv (Remaining Range) plus probe accuracy |
Resolution |
0.1 °C |
| General technical data | |
|---|---|
Dimensions |
270 x 90 x 65 mm |
Operating temperature |
-5 to +45 °C |
Protection class |
IP40 |
Display size |
240 x 320 pixels |
Display function |
Colour graphic display |
Power supply |
Rechargeable battery pack 3.7 V / 2.6 Ah; Mains unit 6 V / 1.2 A |
Maximum memory |
500,000 readings |
Storage temperature |
-20 to +50 °C |
Weight |
600 g (t3) |
Software
-
Update-Kit / Bootloader (V1.22, EXE, 381 KB) It is partially not possible to execute a firmware update with Windows 8.1 / Windows 10. This can be solved by installing a new Bootloader once.
A description and all necessary files can be found under Update-Kit / Bootloader -
Testo ZIV driver ZIV 2000 for testo 320 and testo 330 (ZIP, 8.8 MB) Testo ZIV driver in the 2000 version. The Testo ZIV driver is used to connect the testo 320 and testo 330 measuring instruments to an application program (sweeping district administration program) according to the interface Version 2.0 defined by the Zentralverband des Schornsteinfegerhandwerks (Central Association of Chimney Sweeps, ZIV). Please check with the manufacturer of your application program as to whether this interface is supported. If Microsoft .NET Framework 4.0 has not been installed on the computer, it must be downloaded from the Microsoft website and installed on the system.
-
Testo ZIV driver for testo 300, testo 320 and testo 330 (v2.2 SP3, EXE, 64.193 KB) The Testo ZIV driver is used to connect the testo 300, testo 320 and testo 330 measuring instruments to an application program (sweeping district administration program) according to the interface defined by the Zentralverband des Schornsteinfegerhandwerks (ZIV, Central Association of Chimney Sweeps) in version 1.0 of 01. August 2012 as well as in version 2.0 of 13. February 2017. Please check with the manufacturer of your application program as to whether this interface is supported.
-
Software EasyHeat for testo 300, 312-4, 320, 324, 330, 380 (v2.12 SP3, EXE, 101.938 KB) If you already have the testo EasyHeat software installed, your version will be updated. The update is possible with every version of the testo EasyHeat. This version can also be used as a demo version for costumers who don't have installed the testo easyheat software at the moment. It will void after 30-days, but can be activated with a serial code at every time.