Gas

Although often barely noticeable and harmless if spotted and treated promptly, leaks will only grow into a bigger problem if left undetected. The consequences of a leak can be enormous and costly, ranging from reduced efficiency, higher operational costs and adverse impacts on the natural environment.Most seriously however, human health and safety can be compromised if dangerous substances - such as some gases - are allowed to leak. As such, having strategies and tools in place to quickly and accurately detect leaks is imperative. Today it is possible to utilise Testo‘s quality instruments to carry out gas leak detection quickly and reliably, identifying the source of the leak.Did you know:According to the Centres for Disease Control and Prevention (CDC), red blood cells are able to pick up carbon monoxide more quickly than oxygen. As a result, excessive inhalation of carbon monoxide can result in the gas blocking oxygen from getting into the body.

43 Products or Recomendations for Gas
  • testo 316-2 - Multi Gas Leak Detector

    Order-Nr. 0632 3162

    Speedy and sure gas leak detection. The testo 316-2 provides you with a quick and reliable means of detecting methane, propane and hydrogen in the surrounding air. The gas concentration is displayed in the form of an easy-to-read bar and an alarm is triggered when a threshold is crossed.

    • 18-step bar for displaying gas concentration; additional maximum leakage display

    • Quick reaction time with built-in pump

    • Flexible gooseneck sensor for checking hard-to-reach pipes and places

    • Rechargeable batteries for longer performance

  • testo 316-1 - Gas Leak Detector for Pipe Work

    Order-Nr. 0632 0316

    Speedy and sure detection of gas leaks in natural gas pipes. The testo 316-1 leak detector with two-stage visual alarm system is ideal for carrying out quick and reliable checks.

    • Speedy and sure leak detection in natural gas pipes

    • Audible and two-stage visual alarm that are triggered when a threshold is crossed

    • Flexible gooseneck sensor for hard-to-reach places

    • Tested by DVGW

  • testo 317-3 - CO Monitor

    Order-Nr. 0632 3173

    Carbon monoxide is a killer. That’s why CO checks need to be carried out when a gas heating or boiler is being serviced or installed. The compact testo 317-3 CO meter is designed to provide you with a quick and reliable means of testing the surrounding air for carbon monoxide.

    • Ready to go: no zero phase

    • Alarm with adjustable thresholds

    • Carry case with belt clip and handstrap

    • 3-year CO sensor warranty

  • testo 312-3 - Pressure Meter (300/6000 mbar)

    Order-Nr. 0632 0314

    The testo 312-3 pressure measuring instrument is your reliable partner when you want to test water or gas pipes. You can carry out load and tightness tests of gas pipes as well as pressure tests of water pipes using air with the testo 312-3 pressure measuring instrument.

    • Load and tightness tests of gas pipes

    • Pressure testing of water pipes using air

    • Switchable measuring ranges with high resolution

    • Alarm indicator for undershooting of freely adjustable limit values

  • testo 317-1 - Gas spillage detector

    Order-Nr. 0632 3170

    Gas leaks on heating systems can quickly become a problem, because breathing in poisonous gases leads to health risks or even a risk of death. With the testo 317-1 back pressure indicator you have a handy measuring instrument which detects escaping heating flue gases quickly and reliably.

    • Reliable detection of escaping flue gases

    • Flexible probe for inaccessible areas

    • Acoustic and visual alarm

  • testo 317-2 - Gas Leak Detector

    Order-Nr. 0632 3172

    Do you want to test quickly and efficiently whether there is a gas leak on gas pipe connections? Let the reliable testo 317-2 gas leak detector support you in your task. The handy gas detector for new users detects methane and propane.

    • Display of gas concentration via bar display

    • Self-test of sensor after switching on

    • Pitch of alarm rises along with gas concentration

    • Battery monitoring with optical display

  • testo 312-4 - Differential Pressure Meter (High-pressure Set)

    Order-Nr. 0563 1328

    testo 312-4 differential pressure gauge
    testo 312-4 hose set
    balloon pump with release screw
    conical test plug 1/2
    conical test plug 3/4
    testo fast printer
    pressure set for gas pressure measurements on heating systems
    high-pressure plug 3/8 und 3/4
    high-pressue plug 1/2 and 1
    high-pressure probe 1up to 25 bar
    system case

  • testo 316-EX - Gas Leak Detector

    Order-Nr. 0632 0336

    The testo 316-EX gas leak detector helps you to detect gas leaks and ATEX protection means it can also be used in potentially explosive atmospheres. Gas verification and gas leak location can be carried out on gas pipes and installations both indoors and outdoors.

    • ATEX approval (94/9/EC)

    • ppm and vol.% display

    • Flexible probe for inaccessible areas

    • 3 different types of gas can be detected: methane, propane and hydrogen

  • testo 312-2 - Pressure Meter (40/200 mbar)

    Order-Nr. 0632 0313

    The testo 312-2 pressure measuring instrument is suitable for carrying out pressure measurements when setting and maintaining gas heating systems. The pressure measuring instrument enables you to test the flue gas draught, the differential pressure of the combustion chamber in comparison to the surroundings, or the gas flow pressure, with a high resolution.

    • DVGW-tested

    • Switchable measuring ranges with high resolution

    • Alarm indicator for undershooting of freely adjustable limit values

    • Print out of measurement data with the testo fast printer

  • testo gas detector - Gas detector

    Order-Nr. 0632 0323

    Testo's robust gas detector is a multi-range instrument for detecting methane, propane and hydrogen gases. It has a display which enables direct reading of the ppm-values.

    • Gas detector for methane, propane and hydrogen gases

    • Flexible probe extension for inaccessible areas

    • Acoustic signals on approaching the lower explosive limit

    • With alarm function: continuous tone and indication on the display on reaching the explosive limit

  • testo 315-3 - CO and CO₂ meter for ambient measurements (without Bluetooth)

    Order-Nr. 0632 3153

    The high-quality testo 315-3 is an easy-to-use, ruggedly designed CO and CO2 meter that enables you to carry out quick and reliable ambient measurements according to DIN EN 50543 standard.

    • High-precision electrochemical CO sensor, shock resistant infrared CO2 sensor

    • Visual and audible alarm when thresholds are breached – adjustable thresholds

    • Rugged design

    • TÜV certified according to DIN EN 50543 standard

  • testo 312-4 - Differential Pressure Meter up to 200 hPa

    Order-Nr. 0632 0327

    You can carry out all the necessary tests on gas heating systems as well as water and gas pipes with the testo 312-4 electronic differential pressure measuring instrument. Preset measuring processes, for example for load and tightness tests as well as serviceability testing on gas pipes, provide you with ideal support for your work.

    • Tightness testing and load testing on gas pipes

    • Serviceability testing with air by pressure drop on gas pipes

    • Pressure testing on drinking water and waste water pipes using air

    • Automatic recording of measuring values over several hours

  • testo 315-3 Bluetooth - CO and CO₂ meter for ambient measurements

    Order-Nr. 0632 3154

    The high-quality testo 315-3 is an easy-to-use, ruggedly designed CO and CO2 meter that enables you to carry out quick and reliable ambient measurements according to DIN EN 50543 standard.

    • High-precision electrochemical CO sensor, shock resistant infrared CO2 sensor

    • Visual and audible alarm when thresholds are breached – adjustable thresholds

    • Rugged design

    • TÜV certified according to DIN EN 50543 standard

  • testo 330-2 LL - Flue Gas Analyser (Pro set without printer)

    Order-Nr. 0563 3372 70

    Ready to get started on the most important tasks involved in flue gas analysis on oil, gas and solid fuel systems: the testo 330-2 LL professional long-life set offers the possibility of flue gas measurement, draught, pressure and ambient CO/CO2 measurements, differential temperature measurement and gas leak detection. You get practical accessories in the flue gas analysis set (flue gas probe, hose connection set, Bluetooth printer, etc.).

    • 330-2 LL flue gas analyzer with fresh air valve to protect the CO measuring cell and to extend the CO measuring range to 30,000 ppm 

    • 4-year warranty on the probes which users can change themselves, including sensor monitoring with a service life of up to 6 years

    • Single-hose connection: just one hand movement is needed to securely connect all the channels for flue gas measurement (gas paths, draught, temperature probe integrated into the flue gas probe)

    • TÜV-tested according to 1st German Federal Immission Control Ordinance (BImSchV) EN 50379, Parts 1-3

  • testo 320 - Flue Gas Analyser (Standard Set)

    Order-Nr. 0563 3220 77

    The ideal equipment for heating engineers: with this testo 320 flue gas analysis set, you can carry out your measuring tasks on heating systems quickly and efficiently. Use the flue gas analyser to measure flue gas, draught, pressure, ambient CO and CO2, differential temperature and also detect gas leaks.

    • Free Bluetooth connection to enable the analyser to be connected to Testo’s free Combustion App - Only on Android devices!

    • Measurement of flue gas, draught, pressure, ambient CO, differential temperature and gas leak detection and more

    • Self-explanatory menu guidance with standardised measuring procedures for quick, easy handling

    • Easy to operate thanks to single-hose connection

    • 3-year instrument and CO & O2 sensor warranty

  • testo 330i basic set - flue gas analyser set

    Order-Nr. 0563 3000 70

    Everything you need to carry out efficient servicing and commissioning of heating systems using the testo 330i flue gas analyser – in one compact set.

    • Operation independent of measuring location and display of readings via smartphone or tablet and the testo 330i App

    • Paperless documentation and report creation on site with the testo 330i App

    • Reliable attachment of the flue gas probe with the testoFix probe holder

    • Practical accessories, including probes and temperature probe

  • testo 315-4 - CO measuring instrument

    Order-Nr. 0632 3155

    For quick, precise measurement of carbon monoxide in ambient air – in accordance with DIN EN 50543: The testo 315-4 CO measuring instrument is easy to operate, has a robust design and is of durable quality.

     

    • High-precision carbon monoxide measurement in ambient air

    • TÜV-tested according to EN 50543

    • Convenient, easy operation

    • Data can be printed out on site

  • testo 330i advanced set - flue gas analyser set

    Order-Nr. 0563 3000 71

    The testo 330i flue gas analyser advanced set will enable you to overcome all the challenges that crop up when commissioning and servicing heating systems. The testo 330i advanced set contains the flue gas analyser, a flue gas probe and a temperature probe, along with practical accessories.

    • Operation independent of measuring location and display of readings via smartphone or tablet and the testo 330i App

    • Paperless documentation and report creation on site with the testo 330i App

    • Reliable attachment of the flue gas probe with the testoFix probe holder

    • Robust, completely enclosed plastic housing for use in harsh environments

  • testo 330-1 LL - Flue Gas Analyser (Pro set without printer)

    Order-Nr. 0563 3371 70

    This flue gas analysis set with Bluetooth means you have the appropriate equipment ready to hand and can get down to work straight away: the set has the testo 330-1 LL flue gas analyzer, case and practical accessories and is ideal for customer service and maintenance engineers.

    • Included in the set: TÜV-tested testo 330-1 LL flue gas analyzer, including O2 and CO H2-compensated sensor, Bluetooth interface, mains unit, TÜV-tested modular flue gas probe, combustion air temperature probe, pressure connection set, testo BLUETOOTH® printer and professional instrument case

    • TÜV-tested flue gas analyzer according to 1st German Federal Immission Control Ordinance (BImSchV) and EN 50379, Parts 1 to 3

    • Long-life sensors with up to 6 years' service life

    • 4-year warranty without maintenance contract

43 Products found
more...