Gas

Although often barely noticeable and harmless if spotted and treated promptly, leaks will only grow into a bigger problem if left undetected. The consequences of a leak can be enormous and costly, ranging from reduced efficiency, higher operational costs and adverse impacts on the natural environment.Most seriously however, human health and safety can be compromised if dangerous substances - such as some gases - are allowed to leak. As such, having strategies and tools in place to quickly and accurately detect leaks is imperative. Today it is possible to utilise Testo‘s quality instruments to carry out gas leak detection quickly and reliably, identifying the source of the leak.Did you know:According to the Centres for Disease Control and Prevention (CDC), red blood cells are able to pick up carbon monoxide more quickly than oxygen. As a result, excessive inhalation of carbon monoxide can result in the gas blocking oxygen from getting into the body.

21 products or recommendations for Gas
  • testo 312-4 - Differential Pressure Meter up to 200 hPa

    Order-Nr. 0632 0327

    You can carry out all the necessary tests on gas heating systems as well as water and gas pipes with the testo 312-4 electronic differential pressure measuring instrument. Preset measuring processes, for example for load and tightness tests as well as serviceability testing on gas pipes, provide you with ideal support for your work.
    • Tightness testing and load testing on gas pipes

    • Serviceability testing with air by pressure drop on gas pipes

    • Pressure testing on drinking water and waste water pipes using air

    • Automatic recording of measuring values over several hours

    £ 389.00
    incl. VAT  £ 466.80
  • testo 300 kit with printer - testo 300 flue gas analyser (O2, CO up to 4,000 ppm, NO)

    Order-Nr. 0564 3002 74

    The testo 300 flue gas analyser is ideal for the most important measurements involving heating systems. It combines decades of experience in measuring technology with contemporary Smart-Touch operation, robust construction and e-mailing of reports. The testo 300 enables easy measurement of flue gas, draught, pressure, ambient CO and differential temperature.
    • Fast and easy to operate: intuitive measurement menus and fast-response Smart-Touch display

    • Including O2, CO sensor up to 4,000 ppm and NO sensor

    • Large 5-inch HD display – see all the system's measuring values at a glance

    • In the kit: testo 300 flue gas analyser, including O2 and CO sensor up to 4,000 ppm, NO sensor, mains unit, basic flue gas probe, spare dirt filters, Bluetooth® printer, EasyHeat software, instrument bag

    £ 1 499.00
    incl. VAT  £ 1 798.80
  • testo 300 LL - Longlife standard kit 

    Order-Nr. 0564 3004 82

    Carry out installation and maintenance work on heating systems several times a day using the flue gas analyser with Longlife sensors. The EN50379, Parts 1-3 compliant testo 300 Longlife flue gas analyser is supplied with O2 and CO H2-compensated sensor up to 30,000 ppm (NO - can be retrofitted), modular flue gas probe, case and practical accessories.
    • Intuitive, smart, efficient: intuitive measurement menus, fast-response Smart-Touch operation, on-site documentation, e-mailing of reports

    • Including O2, CO H2-compensated sensor up to 30,000 ppm (NO sensor - can be retrofitted)

    • High-quality sensor technology with up to 6 years' service life

    • In the kit: testo 300 Longlife flue gas analyzer, including O2 and CO H2-compensated sensor up to 30,000 ppm (NO - can be retrofitted), mains unit, modular flue gas probe, spare dirt filters, EasyHeat software, case

    £ 1 469.00
    incl. VAT  £ 1 762.80
  • testo 300 - standard kit

    Order-Nr. 0564 3002 70

    With this kit, you will be equipped for the most important measurements involving heating systems: the EN 50379, Parts 1-3 compliant testo 300 flue gas analyser is supplied with O2 and CO sensor up to 4,000 ppm, basic flue gas probe, instrument case and practical accessories.
    • Fast and easy to operate: intuitive measurement menus and fast-response Smart-Touch display

    • Including O2 and CO sensor up to 4,000 ppm

    • Large 5-inch HD display – see all the system's measuring values at a glance

    • In the kit: testo 300 flue gas analyzer, including O2 and CO sensor up to 4,000 ppm, mains unit, basic flue gas probe, spare dirt filters, EasyHeat software, instrument case

    £ 849.00
    incl. VAT  £ 1 018.80
  • testo 300 - standard kit + printer kit

    Order-Nr. 0564 3002 71

    With this kit, you will be equipped for the most important measurements involving heating systems: the testo 300 flue gas analyzer is supplied with O2 and CO sensor up to 4,000 ppm, basic flue gas probe, testo Bluetooth® printer, instrument case and practical accessories.
    • Fast and easy to operate: intuitive measurement menus and fast-response Smart-Touch display

    • Including O2 and CO sensor up to 4,000 ppm

    • Large 5-inch HD display – see all the system's measuring values at a glance

    • In the kit: testo 300 flue gas analyzer, including O2 and CO sensor up to 4,000 ppm, mains unit, basic flue gas probe, spare dirt filters, testo Bluetooth® printer, spare thermal paper, EasyHeat software, instrument case

    £ 1 069.00
    incl. VAT  £ 1 282.80
  • testo 300 Longlife kit with printer - testo 300 Longlife flue gas analyser (O2, CO H2-compensated up to 30,000 ppm, NO)

    Order-Nr. 0564 3004 84

    The testo 300 flue gas analyser with Longlife sensors is ideal for heating engineers who carry out installation and maintenance work on heating systems several times a day. It combines decades of experience in measuring technology with contemporary Smart-Touch operation, robust construction and e-mailing of reports. The testo 300 enables easy measurement of flue gas, draught, pressure, ambient CO and differential temperature. This kit includes a factory fitted NO sensor for NOx measurement. 
    • Intuitive, smart, efficient: intuitive measurement menus, fast-response Smart-Touch operation, on-site documentation, e-mailing of reports

    • Including O2, CO H2-compensated sensor up to 30,000 ppm and NO sensor

    • High-quality sensor technology with up to 6 years' service life

    • In the kit: testo 300 Longlife flue gas analyzer, including O2 and CO H2-compensated sensor up to 30,000 ppm, NO sensor, mains unit, modular flue gas probe, spare dirt filters, testo Bluetooth® printer, spare thermal paper, EasyHeat software, case

    £ 1 999.00
    incl. VAT  £ 2 398.80
  • testo 300 - advanced kit

    Order-Nr. 0564 3002 81

    With this kit, you will be equipped for the most important measurements involving heating systems: the EN 50379, Parts 1-3 compliant testo 300 flue gas analyser is supplied with O2 and CO sensor up to 4,000 ppm, basic flue gas probe, Bluetooth® printer, 2 x clamp probes with NTC temperature sensor, pressure connection kit, instrument bag and practical accessories
    • Fast and easy to operate: intuitive measurement menus and fast-response Smart-Touch display

    • Including O2 and CO sensor up to 4,000 ppm

    • Large 5-inch HD display – see all the system's measuring values at a glance

    • In the kit: testo 300 flue gas analyzer, including O2 and CO sensor up to 4,000 ppm, mains unit, basic flue gas probe, spare dirt filters, Bluetooth® printer, 2 x clamp probes (NTC), pressure connection kit, EasyHeat software, instrument bag

    £ 1 199.00
    incl. VAT  £ 1 438.80
  • testo 320 - Flue Gas Analyser (Standard Set)

    Order-Nr. 0563 3220 80

    The testo 320 features all the essential functions for carrying out flue gas analysis on domestic heating systems, including flue draught, pressure measurements, and differential temperature measurement. The flue gas analyser is easy to use with its full colour graphic display featuring a user-friendly menu guidance. The analyser measures both O2 and CO (4,000ppm sensor fitted as standard) and can also display calculated parameters such as combustion ratio, CO2, etc. A range of optional probes also allow measurement of ambient CO and gas escape detection. The device can store up to 500 measurement reports to internal memory, and also features Bluetooth communication with Testo's free Combustion app is also possible (App only for Android devices)
    • Six applications, one device: flue gas, flue draft, pressure, gas leak detection, CO ambient air and pressure difference measurements

    • Integrated flue gas sensors with temperature sensor included; ultra-fine pressure sensors and a wide range of other sensors, ports and probes optional

    • Rugged, high-quality design, high-resolution, multi-color display, self-explanatory menu guide

    • TÜV-tested according to EN 50379, Parts 1-3 and 1st BImSchV

    • Six applications, one device: flue gas, flue draft, pressure, gas leak detection, CO ambient air and pressure difference measurements

    • Integrated flue gas sensors with temperature sensor included; ultra-fine pressure sensors and a wide range of other sensors, ports and probes optional

    • Rugged, high-quality design, high-resolution, multi-color display, self-explanatory menu guide

    • TÜV-tested according to EN 50379, Parts 1-3 and 1st BImSchV

    £ 650.00
    incl. VAT  £ 780.00
  • testo 327-1 - Flue Gas Analyser (standard kit)

    Order-Nr. 0563 3203 80

    The testo 327-1 Flue Gas Analyser offers a robust and simple entry into flue gas analysis for domestic boilers. It measures O2 & CO , and will calculate ratio, CO2, etc. The 4-line LED  display can be configured to the users requirements, and its back-lighting function guarantees an easy-to-read display even if lighting conditions are unfavourable. The analyser stands out on account of its easy menu navigation and ergonomic housing as well as its durability.
    £ 450.00
    incl. VAT  £ 540.00
  • testo 320 - Flue Gas Analyser (Advanced Set)

    Order-Nr. 0563 3220 81

    The testo 320 features all the essential functions for carrying out flue gas analysis on domestic heating systems, including flue draught, pressure measurements, and differential temperature measurement. The flue gas analyser is easy to use with its full colour graphic display featuring a user-friendly menu guidance. The analyser measures both O2 and CO (4,000ppm sensor fitted as standard) and can also display calculated parameters such as combustion ratio, CO2, etc. A range of optional probes also allow measurement of ambient CO and gas escape detection. The device can store up to 500 measurement reports to internal memory, and also features Bluetooth communication with Testo's free Combustion app is also possible (App only for Android devices)
    £ 790.00
    incl. VAT  £ 948.00
  • testo 327-1 - Flue Gas Analyser (advanced kit)

    Order-Nr. 0563 3203 81

    The testo 327-1 Flue Gas Analyser offers a robust and simple entry into flue gas analysis for domestic boilers. It measures O2 & CO , and will calculate ratio, CO2, etc. The 4-line LED  display can be configured to the users requirements, and its back-lighting function guarantees an easy-to-read display even if lighting conditions are unfavourable. The analyser stands out on account of its easy menu navigation and ergonomic housing as well as its durability.
    £ 590.00
    incl. VAT  £ 708.00
  • testo 330-1 LL - Flue Gas Analyser (Pro set without printer)

    Order-Nr. 0563 3371 70

    This flue gas analysis set means you have the appropriate equipment ready to hand and can get to work straight away. The set has the testo 330-1LL flue gas analyser, case and practical accessories. Ideal for customer service and maintenance engineers.
    • Independently tested to EN50379. Meets the requirements of BS7967 and Gas Safe TB143

    • Longlife sensors lasting up to 6 years

    • CO cell limit 4,000ppm

    £ 1 499.00
    incl. VAT  £ 1 798.80
  • testo 330-2 LL - Flue Gas Analyser (Pro set without printer)

    Order-Nr. 0563 3372 70

    Ready to get started on the most important tasks involved in flue analysis on oil, gas and solid fuel systems. The testo 330-2LL professional long-life set (Pro-set without printer) offers the possibility of flue gas measurement, draught, pressure and ambient CO/CO<sub>2</sub> measurements, differential temperature measurement and gas leak detection. 
    • Independently tested to EN50379. Meets the requirements of BS7967 and Gas Safe TB143

    • Longlife sensors lasting up to 6 years

    • Dilution to 30,000ppm CO 

    • Optional NO sensor upgrade 

    £ 1 749.00
    incl. VAT  £ 2 098.80
  • testo 330-2 LL - Flue Gas Analyser (Pro set with printer)

    Order-Nr. 0563 3372 71

    testo 330-2LL (O2 and COH2) flue gas set for service technicians and inspectors. Includes infrared printer, battery and calibration protocol, mains unit 100-240 V for mains operation or charging the battery in the instrument, combustion air temperature probe (length 190mm), USB cable, flue gas probe (length 300mm diameter 8mm).
    • Independently tested to EN50379. Meets the requirements of BS7967 and Gas Safe TB143

    • Longlife sensors lasting up to 6 years

    • Dilution to 30,000ppm CO 

    • Optional NO sensor upgrade 

    £ 1 899.00
    incl. VAT  £ 2 278.80
  • testo 330-2 LL - Flue Gas Analyser (Pro set with Bluetooth, without printer)

    Order-Nr. 0563 3372 72

    testo 330-2LL (O2 and COH2) flue gas set for service technicians and inspectors, with bluetooth (for connectivity for the testo combustion app), battery and calibration protocol, mains unit 100-240 V for mains operation or charging the battery in the instrument and combustion air temperature probe (length 190mm). Also includes USB connection cable, flue gas probe (length 300mm diameter 8mm) and carry case.
    • Independently tested to EN50379. Meets the requirements of BS7967 and Gas Safe TB143

    • Longlife sensors lasting up to 6 years

    • Dilution to 30,000ppm CO 

    • Optional NO sensor upgrade 

    £ 1 799.00
    incl. VAT  £ 2 158.80
  • testo 320 - Flue Gas Analyser (Standard Set)

    Order-Nr. 0563 3220 77

    The ideal equipment for heating engineers: with this testo 320 flue gas analysis set, you can carry out your measuring tasks on heating systems quickly and efficiently. Use the flue gas analyser to measure flue gas, draught, pressure and differential temperature. Can also measure ambient CO and detect gas leaks with an optional additional probe.
    • Free Bluetooth connection to enable the analyser to be connected to Testo’s free Combustion App - Only on Android devices!

    • 5 applications with one instrument: measurement of flue gas, draught, pressure, ambient CO, differential temperature and gas leak detection (with optional probe)

    • Clear and simple colour menu - tests listed with icons and text

    • Independently tested according to EN 50379 Parts 1-3

    £ 650.00
    incl. VAT  £ 780.00
  • testo 320 - Flue Gas Analyser (Advanced Set)

    Order-Nr. 0563 3220 78

    The ideal equipment for heating engineers: with this testo 320 flue gas analysis set, you can carry out your measuring tasks on heating systems quickly and efficiently. Use the flue gas analyser to measure flue gas, draught, pressure, ambient CO2 and differential temperature. Can also detect gas leaks and ambient CO with an optional additional probe. 
    • Free Bluetooth connection to enable the analyser to be connected to Testo’s free Combustion App - Only on Android devices!

    • 5 applications with one instrument: measurement of flue, gas, draught, pressure, ambient COdifferential pressure and gas leak detection (with optional probe) 

    • Clear and simple colour menu - tests listed with icons and text

    • Independently tested according to EN 50379 Parts 1-3

    £ 690.00
    incl. VAT  £ 828.00
  • testo 320 - Flue Gas Analyser (Advanced Set with printer)

    Order-Nr. 0563 3220 79

    The ideal equipment for heating engineers: with this testo 320 flue gas analysis set, you can carry out your measuring tasks on heating systems quickly and efficiently. Use the flue gas analyser to measure flue gas, draught, pressure and differential temperature. Can also measure ambient CO and detect gas leaks with an optional additional probe. 
    • Free Bluetooth connection to enable the analyser to be connected to Testo’s free Combustion App - Only on Android devices!

    • 5 applications with one instrument: measurement of the gas, draught, pressure ambient CO, differential temperature and gas leak detection (with optional probe)

    • Clear and simple colour menu - tests listed with icons and text

    • Independently tested according to EN 50379 Parts 1-3

    £ 790.00
    incl. VAT  £ 948.00
  • testo 327-1 - Flue Gas Analyser (Advanced Set)

    Order-Nr. 0563 3203 71

    The testo 327-1 is your introductory instrument to flue gas analysis. It measures combustion efficiency, &deg;C, O2, CO2, CO and flue draught. The strong LED background light in the 4 line display guarantees an easy-to-read display even if lighting conditions are unfavourable. The analyser stands out on account of its easy menu navigation and ergonomic housing as well as its durability. Advanced set includes a Differential hose kit, Differential temperature kit and testo infrared printer (0554 0549).
    £ 590.00
    incl. VAT  £ 708.00
  • testo 327-1 - Flue Gas Analyser (Standard Set)

    Order-Nr. 0563 3203 70

    The testo 327-1 is your introductory instrument to flue gas analysis. It measures combustion efficiency, °C, O2, CO2, CO and flue draught. The strong LED background light in the 4 line display guarantees an easy-to-read display even if lighting conditions are unfavourable. The analyser stands out on account of its easy menu navigation and ergonomic housing as well as its durability.
    £ 450.00
    incl. VAT  £ 540.00
21 Products found
Show More