Flue gas, gas and particle

The Testo range of Flue Gas Analysers can provide the right flue gas instrument for any application. Testo provide flue gas analysers ideal for smaller companies working on domestic boiler gas analysis through to gas analysers and emissions monitors for large industrial applications such as oil and gas installations. From the Testo 310 through to the Testo 350 - For every job, there's a Testo Flue Gas Analyser.

13 products or recommendations for Flue gas
  • testo 350 - Analysis Box for exhaust gas analysis systems

    Order-Nr. 0632 3510

    The testo 350 is a rugged, easy-to-use exhaust gas analyser designed to meet the highest demands when it comes to carrying out precise industrial emission measurements and providing proper data administration. The Analysis Box can be operated with up to 6 gas sensors, 5 of which are optional. This allows you to select freely from sensors for CO, NO, NO2, SO2, H2S, CxHy and CO2.
    • Increased measurement range for unlimited measurements even when gas concentrations are higher

    • Easy-to-change gas sensors and easy access to wearing parts

    • Sealed housing with built-in impact protection for use in harsh conditions

    • Easy operation of the analyzer unit via Control Unit or easyEmission software (both products available separately) 

    • MCERT Certificate MC090159/05

  • testo 340 - Flue gas analyser for use in industry

    Order-Nr. 0632 3340

    Emission checks in industry: Professional technology meets practical design. The testo 340 combustion analyser is an easy-to-use flue gas analyser that can be fitted with up to four different gas sensors.  Available in 3 different kit configurations 
    • Can measure CO, COlow, NO, NOlow, NO2 or SO2

    • Extended measuring range for use in environments with high gas concentrations

    • Precalibrated gas sensors for quick and easy sensor change

    • Integrated pressure difference and air flow measurements for mass flow calculations

  • testo 350 - Control Unit for exhaust gas analysis systems

    Order-Nr. 0632 3511

    The Control Unit complements the testo 350 Analysis Box (separate product) and makes it easier to control emission measurements. The testo 350 is a rugged, easy-to-use exhaust gas analyser designed to meet the highest demands when it comes to carrying out precise industrial emission measurements and providing proper data administration.
    • testo 350 Analysis Box just as easy to use when not positioned at measurement site

    • Internal memory for receiving measurement data from the Analysis Box

    • Large graphic color display, robust, industrial-type housing

    • User-friendly application-specific menu guide

  • testo 312-4 - Differential Pressure Meter (Basic Set)

    Order-Nr. 0563 1327

    testo 312-4 differential pressure gauge
    testo 312-4 hose set
    balloon pump with release screw
    conical test plug 1/2
    conical test plug 3/4
    testo fast printer
    pressure set for gas pressure measurements in heating systems
    system case
    £ 849.00
    incl. VAT £ 1,018.80
  • testo 312-4 - Differential Pressure Meter up to 200 hPa

    Order-Nr. 0632 0327

    You can carry out all the necessary tests on gas heating systems as well as water and gas pipes with the testo 312-4 electronic differential pressure measuring instrument. Preset measuring processes, for example for load and tightness tests as well as serviceability testing on gas pipes, provide you with ideal support for your work.
    • Tightness testing and load testing on gas pipes

    • Serviceability testing with air by pressure drop on gas pipes

    • Pressure testing on drinking water and waste water pipes using air

    • Automatic recording of measuring values over several hours

    £ 389.00
    incl. VAT £ 466.80
  • testo 312-4 - Differential Pressure Meter (High-pressure Set)

    Order-Nr. 0563 1328

    testo 312-4 differential pressure gauge
    testo 312-4 hose set
    balloon pump with release screw
    conical test plug 1/2
    conical test plug 3/4
    testo fast printer
    pressure set for gas pressure measurements on heating systems
    high-pressure plug 3/8 und 3/4
    high-pressue plug 1/2 and 1
    high-pressure probe 1up to 25 bar
    system case
    £ 1,149.00
    incl. VAT £ 1,378.80
  • testo 338 Smoke Tester with Bluetooth - Smoke Tester with Bluetooth

    Order-Nr. 0632 3382

    For diesel engines, the smoke count is an important parameter, not only for evaluating emissions but also for the correct adjustment of the fuel injection. With the smoke tester testo 338 (with Bluetooth), the determination of the degree of blackening is revolutionarily easy; no stationary measurement equipment, no analysis electronics – with just one portable one-hand measuring instrument.
    • Handy and robust: easily possible to carry to the desired application site

    • Determination of soot concentration (mg/m3) as well as Filter Smoke Number (FSN) or Bosch number

    • Easy one-handed operation

    • Direct analysis and display of measurement values, optional on-site printout of data with Testo fast printer

  • testo 338 - Smoke tester

    Order-Nr. 0632 3381

    For diesel engines, the smoke count is an important parameter, not only for evaluating emissions, but also for the correct adjustment of the fuel injection. With the smoke tester testo 338, the determination of degree of blackening is revolutionarily easy; no stationary measurement equipment, no analysis electronics – with just one portable one-hand measuring instrument.
    • Handy and robust Easily possible to carry to the desired application site

    • Determination of soot concentration (mg/m3) as well as Filter Smoke Number (FSN) or Bosch number

    • Easy one-handed operation

    • Direct analysis and display of measurement values, optional on-site printout of data with Testo fast printer

  • Industrial probe kit 1200°C

    Order-Nr. 0600 7610

    The industrial probe set 1 200 °C enables the extractive sampling of flue gas analysed at high flue gas temperatures (up to 1 200 °C) or for applications involving large flue gas pipe diameters.
    • Can be used in combination with testo 340 and testo 350

    • Additional inline filter to protect the gas sampling hose from contamination

    • Unheated sampling tube (1 200 °C) can be extended up to max. 3 m using optional extension tubes

    • Very easy to handle

  • testo easyEmission software

    Order-Nr. 0554 3334

    The testo easyEmission PC software offers numerous functions for convenient measurement data management.
    • Convenient measurement data management

    • Including USB connection cable

  • testo smoke pump

    Order-Nr. 0554 0307

    Smoke tester with oil and soot sheet, for measuring soot in flue gas, excl. cone (part no. 0554 9010)
    £ 87.00
    incl. VAT £ 104.40
  • Transport case

    Order-Nr. 0516 3510

    Store your equipment securely in the robust transport case: the case provides enough storage space for the appropriate measuring instrument, probes and accessories.
    • Can be used between plug-in head cable and instrument

  • Instrument bag for smoke tester testo 308

    Order-Nr. 0516 0002

    Instrument bag for smoke tester testo 308
    £ 31.30
    incl. VAT £ 37.56
13 Products found