Government authorities

8 products or recommendations for Government authorities
  • testo 338 - Smoke tester

    Order-Nr. 0632 3381

    For diesel engines, the smoke count is an important parameter, not only for evaluating emissions, but also for the correct adjustment of the fuel injection. With the smoke tester testo 338, the determination of degree of blackening is revolutionarily easy; no stationary measurement equipment, no analysis electronics – with just one portable one-hand measuring instrument.

    • Handy and robust Easily possible to carry to the desired application site

    • Determination of soot concentration (mg/m3) as well as Filter Smoke Number (FSN) or Bosch number

    • Easy one-handed operation

    • Direct analysis and display of measurement values, optional on-site printout of data with Testo fast printer

  • Comfort probe for turbulence measurement

    Order-Nr. 0628 0143

    The comfort probe (with the appropriate measuring instrument) is ideally suited for determining indoor air turbulence in accordance with EN 13779.

    • Turbulence measurement in accordance with EN 13779

    • Determination of air velocity and draught risk

    • Integrated temperature and ambient pressure measurement

    • Intelligent calibration concept

    £ 619.00
    £ 742.80 incl. VAT
  • Comfort probe for turbulence measurement

    Order-Nr. 0628 0109

    The comfort probe (with the appropriate measuring instrument) is ideally suited for determining indoor air turbulence in accordance with EN 13779.

    • Turbulence measurement in accordance with EN 13779

    • Non-directional flow measurement

    • High level of accuracy even at low flow velocities

    • Integrated temperature measurement

    £ 679.00
    £ 814.80 incl. VAT
  • Ambient CO probe

    Order-Nr. 0632 1235

    The ambient CO probe (in conjunction with the appropriate measuring instrument) helps you to detect carbon monoxide in indoor room air.

    • Long-term measurement stability thanks to electrochemical sensor

    • Automatic zeroing

    • Measuring range: 0 to +500 ppm

    £ 349.00
    £ 418.80 incl. VAT
  • Hot ball probe (Ø 7.5 mm) - for flow, temperature and humidity

    Order-Nr. 0635 1540

    The hot ball probe (in conjunction with the appropriate measuring instrument) is ideal for determining flow velocity as well as temperature and humidity in ventilation ducts.

    • 3 functions in 1 probe: measurement of flow, temperature and humidity

    • Measures temperatures up to +70 °C

    • Flow measuring range: 0 to +10 m/s 

    £ 749.00
    £ 898.80 incl. VAT
  • Comfort level probe for measuring degree of turbulence, with...

    Order-Nr. 0628 0009

    Comfort level probe for measuring degree of turbulence, with telescopic handle and stand. Fulfills EN 13779 requirements

    £ 729.00
    £ 874.80 incl. VAT
  • testo DiSCmini - handheld measuring instrument for nanoparticle counting

    Order-Nr. 133

    Use the testo DiSCmini to monitor personal exposure to ultrafine particles (UFP) in work areas or to toxic pollutants such as diesel soot. This will enable you to minimize any risks to health.

    • Measurement and display of particle number, mean particle diameter and LSDA (Lung Deposited Surface Area) with a time resolution of 1 second.

    • Operation without solvents or radioactive radiation sources

    • Insensitive to vibrations, and operation is possible in any position

    • Long battery lifetimes of up to 8 hours

  • testo NanoMet3 - portable nanoparticle counter for Real Driving Emissions (RDE)

    Order-Nr. 444

    The innovative testo NanoMet3 PN-PEMS (particle number, portable emission measurement system) enables you to measure vehicle Real Driving Emissions – RDE.
     

    • One-button operation

    • Gas conditioning: integrated PMP thermodilution

    • Measurement method for gasoline and diesel vehicles without any additional instrument settings

    • No need for any operating resources

8 Products found