Science and Universities

61 products or recommendations for Science and Universities
  • testo NanoMet3 - portable nanoparticle counter for Real Driving Emissions (RDE)

    Order-Nr. 444

    The innovative testo NanoMet3 PN-PEMS (particle number, portable emission measurement system) enables you to measure vehicle Real Driving Emissions – RDE.
     

    • One-button operation

    • Gas conditioning: integrated PMP thermodilution

    • Measurement method for gasoline and diesel vehicles without any additional instrument settings

    • No need for any operating resources

  • testo REXS - High mass soot generator

    Order-Nr. 366

    Reproducible EXhaust Simulator generates nano-sized soot particles which are very similar to diesel soot, and is fully automated. It is impressive thanks to its high mass output, ease of use and attractive cost-saving potential.

    • Combustion soot particles with similar mobility distribution to diesel emissions

    • Stable, reproducible particle size distribution with less than 5% deviation

    • 6 possible operation points with mode diameter between 30 nm and 120 nm

    • Stable operation even when there are changes in the absolute pressure due to increasing backpressure in loaded filters

  • testo DiSCmini - handheld measuring instrument for nanoparticle counting

    Order-Nr. 133

    Use the testo DiSCmini to monitor personal exposure to ultrafine particles (UFP) in work areas or to toxic pollutants such as diesel soot. This will enable you to minimize any risks to health.

    • Measurement and display of particle number, mean particle diameter and LSDA (Lung Deposited Surface Area) with a time resolution of 1 second.

    • Operation without solvents or radioactive radiation sources

    • Insensitive to vibrations, and operation is possible in any position

    • Long battery lifetimes of up to 8 hours

  • testo ViPR - volatile particle remover for sampling and raw gas conditioning according to UNECE R83 and R49

    Order-Nr. 1122B

    The testo ViPR volatile particle remover is a gas conditioning system for sampling, dilution and conditioning of raw gas for particle determination. It is compliant with the method according to PMP (Particle Measurement Programme) and is characterized by its award-winning technology.
     

    • UNECE R83 and R49 compliant

    • Gas conditioning for particle number measurement for vehicle type approval

    • Primary diluter for direct connection to exhaust pipe or CVS dilution tunnel

    • Einfache Bedienung über PC

  • Fast-action surface probe (TC type K)

    Order-Nr. 0602 0393

    The extremely fast-action surface temperature probe with sprung thermocouple strip is suitable for a wide range of applications – including uneven surfaces.

    • Fast response time (3 seconds) thanks to the thermocouple strip

    • Thermocouple type K

    • Also suitable for uneven surfaces

    • Measuring range short-term up to +500°C

  • Flexible, fast-action immersion probe (TC type K)

    Order-Nr. 0602 0593

    Fast, flexible and waterproof: the immersion probe is ideal for carrying out accurate immersion measurements in various liquids.

    • Short response time of 2 seconds

    • Thermocouple type K

    • Waterproof

    • Very large measuring range: -60 to +1000 °C

  • Exceptionally fast temperature probe (TC Type K)

    Order-Nr. 0602 0493

    Exceptionally fast temperature probe with a large measuring range for measurements in air, liquids, pastes and on surfaces

    • TC Type K temperature probe with flexible measuring tip, short response time and 2 m cable

    • Very fast temperature measurement in air, liquids, pastes and on surfaces

    • Measuring range: -200 to +1000 °C

  • Globe thermometer (TC type K) - for radiant heat

    Order-Nr. 0602 0743

    The globe thermometer is suitable for the measurement of radiant heat – e.g. in the context of standard-compliant comfort level measurement at the workplace.

    • For the measurement of radiant heat according to ISO 7243, ISO 7726, DIN EN 27726 and DIN 33403

    • Thermocouple type K 

    • Measuring range: 0 to + 120 °C

  • Fast-action, angled surface probe (TC type K)

    Order-Nr. 0602 0993

    Use this fast-action temperature probe to measure surface temperatures accurately and reliably, even in inaccessible areas – the angled probe tube makes this possible.

    • Fast response time (3 seconds) thanks to the thermocouple strip

    • Thermocouple type K

    • Also suitable for uneven surfaces

    • Measuring range: -60 to +300 °C

  • Surface probe with a small measuring head (TC type K)

    Order-Nr. 0602 0693

    Accurate, waterproof and versatile: the temperature probe measures surface temperatures of up to 1000 °C. Its small measuring head is ideal for carrying out measurements on flat surfaces. Short response time.

    • Low-mass probe: very short response time for accurate measurement results

    • Thermocouple type K

    • Waterproof

    • Very large measuring range: -60 °C to +1000 °C

  • Surface probe with widened measuring tip (TC type K)

    Order-Nr. 0602 1993

    Waterproof, robust and versatile: this temperature probe with sturdy probe shaft and widened measuring tip is ideal for measuring the temperature on flat surfaces.

    • Extra-wide measuring tip for flat surfaces

    • Thermocouple type K

    • Waterproof and robust (sturdy probe shaft)

    • Measuring range: -60 to +400 °C

  • Robust air temperature probe (TC type K)

    Order-Nr. 0602 1793

    Use the robust air temperature probe with exposed sensor (thermocouple type K) to measure air temperature with a short response time. It can be connected to a wide range of measuring instruments.

    • Thermocouple type K 

    • Short response time thanks to the exposed sensor 

    • Can be connected to a wide range of measuring instruments

    • Measuring range: -60 to +400 °C

  • Temperature probe with magnet (TC Type K)

    Order-Nr. 0602 4892

    Temperature probe with magnet for surface measurements on metal surfaces

    • Self-adhesive thanks to a magnet: probe for measuring surface temperature on metal surfaces

    • TC Type K temperature probe with 1.6 m cable

    • Measuring range: -50 to +400 °C

  • Temperature probe with clamping bracket (TC Type K)

    Order-Nr. 0602 4592

     Pipe wrap probe for pipe diameter 5 to 65 mm, with exchangeable measuring head. Meas. range short-term up to +280°C, TC Type K 

    • With clamping bracket: enables quick, easy attachment of the probe to pipes with a diameter of 5 to 65 mm

    • TC Type K temperature probe with 1.2 m cable

    • Measuring range: -60 to +130 °C, briefly up to +280 °C

  • Fast-action immersion/penetration probe (TC type K)

    Order-Nr. 0602 2693

    Fast-action temperature probe with penetration tip – ideal for temperature measurements in pastes and semi-solid media, in liquids and in the air.

    • 1.5 mm thin probe tip for fast temperature recording, 60 mm long probe shaft

    • Splash-proof in accordance with IP54

    • Very short response time of 3 seconds

    • Measuring range: -60 to +800 °C

  • Waterproof immersion/penetration probe (NTC)

    Order-Nr. 0613 1212

    The waterproof immersion/penetration probe with NTC sensor records the temperature in liquids and semi-solid media quickly and accurately.

    • NTC temperature sensor

    • Waterproof

    • Measuring accuracy of up to ±0.2 °C

    • Measuring range: -50 to +150 °C

61 Products found
Show More