Trial read: Data loggers - the smart alternative to thermo-hygrographs.
Some history: Thermo-hygrographs.
For many decades, thermo-hygrographs were the tool of choice for documenting the indoor climate in museums. Technically simple and easy to understand, they can be operated and maintained by museum staff after a relatively short briefing. On regular inspection rounds, a quick glance at the drum is sufficient to establish whether the climatic conditions are OK. However, this advantage can also be detrimental. This is because thermo-hygrographs are comparatively large and therefore conspicuous, which is why they may well be regarded as exhibits in some museums. They are also high-maintenance. The paper for the recording drum needs to be changed regularly – daily, weekly or at the very latest monthly, depending on the setting. The batteries for the clock mechanism and the pens also need to be replaced regularly.
For long-term documentation, the individual sheets of thermo-hygrographs must be appropriately archived. Due to these regular maintenance requirements and also their size, thermo-hygrographs cannot be used everywhere. There is no space for them in display cases, for example. Because of their sensitivity to vibrations and changes in position, they are also completely unsuitable for transport monitoring. Last but not least, the question of costs comes up time and again. The costs per measuring point are quite high due to the annual maintenance requirements, even though the high purchase price can be spread over many years due to the longevity of thermo-hygrographs.
Requirements for data loggers in museums
Due to the obvious disadvantages of thermo-hygrographs, data loggers have been increasingly used for monitoring the climate in museums since the 1990s. And after all these years, you might think that there would be a large selection of perfect data loggers specifically for museums.
Unfortunately, this is not the case. Firstly, this is because in general these instruments were developed with completely different applications in mind and they are often "misused" in museums. Secondly, there is no typical museum application. The requirements for a data logger vary considerably within a museum.
In exhibition areas H3>
In display cases H3>
In the storage facility H3>
That was only a small excerpt. Would you like to carry on reading more? If so, simply request the complete expert report.
It only takes a minute, and you will benefit from reading these sections:
Content of the expert report
- Some history: Thermo-hygrographs
- Requirements for data loggers in museums
- Data loggers measure differently: digitally, rather than via analog signals
- Data loggers measure differently: Accuracy
- Data loggers can do more: Other measurement parameters
- Data loggers can do more: Alarms
- How do I get my data?
- What operating systems and software do I need?
- How much memory do I need?
- What is the battery life of data loggers?
- Is the wireless range sufficient for my museum?