Image
  1. Home
  2. testo 350 MARITIME

testo 350 MARITIME - Portable Emission Analyzer for Diesel Ship Engines

0563 3503
testo 350 Maritime
Image
testo 350 Maritime
  • Fast, simple, accurate O2, CO, NOx readings on diesel engines
  • Approved for testing under the NOx Technical Code 
  • Built for the demanding marine environments
  • Certified quality with DNV, NK, MED, Module B &D – and optimized for marine fuels  
  • Determination of the fuel sulfur content by means of SO2/CO2/ ratio according to MEPC 184 (59)
    • The testo 350 MARITIME is the world’s first portable emission analyzer for diesel ship engines approved for MARPOL Annex VI and the NOx Technical Code.  Built to meet the demands of maritime conditions, it measures O2, CO, and NOx more easily and less costly than other methods.

    *NOTE* As the testo 350 MARITIME are manufactured TO ORDER, please be advised that lead time may be up to 6 weeks, and ALL SALES ARE FINAL.
    The testo 350 MARITIME Emission Analyzer is designed for emission measurement on marine diesel engines for measuring the gaseous exhaust gas concentrations of NO, NO2, SO2, CO, CO2-(IR), O2. In order to meet the harsh requirements at sea, the complete flue gas analyzer, including accessories, is housed in a robust protective case with a trolley function.

    The testo 350 MARITIME

    The testo 350 MARITIME can be used for the following on-board verification surveys in accordance with the NOx Technical Code 2008: For the simplified testing and measurement method, for instance if modifications have been made to the engine, such as readjustment.

    The testo 350 MARITIME flue gas analyzer is also suitable for checking the NOx limit values stipulated in MARPOL Annex VI. The NOx values are for example tested in official NOx checks. The NOx measurement can also be used to provide proof of NOx reduction, which is required in regional special zones with specific NOx tax requirements (such as Norway)

    Type-Approval Note:  This device is a type-approved analyzer to specifically meet the regulatory Marine Requirements as such there are no other sensors, or probes that can be configured.  If testing requires other sensors, for example total hydrocarbons or used as a stationary semi-continuous monitoring unit, we recommend the standard testo 350 emission analyzer. The Testo 350 can be configured for many different on-board testing scenarios other than the NOx technical code testing scenarios.  

    Outstanding: testo 350 MARITIME offers certified quality

    The testo 350 MARITIME flue gas analyzer has the following certificates:
    DNV Certificate No. TAA00001K0 Rev. 4, Nippon Kaiji Kyokai (Class NK) certificate no. TA23536M, MED Certificate No. MEDB0000328 Rev. 3 (Module B) and MEDD00002FU (Module D)

    • The testo 350 MARITIME V2 analyzer unit, equipped with NO, NO2, SO2, CO, CO2-(IR) and O2, including gas conditioning, measuring range extension for single slot (only for SO2), fresh air valve for long-term measurement, differential pressure sensor, temperature probe input type K NiCr-Ni and type S Pt10Rh-Pt, Testo data bus connection, rechargeable battery, integrated combustion air probe (NTC), trigger input, measurement data memory and USB interface
    • testo 350 MARITIME V2 Control Unit
    • Robust protective case with trolley function
    • Flue gas probe for industrial engines, 335 mm immersion depth including cone and heat protection plate, Tmax. +1,000°C, special hose for NO2-/SO2 measurements, length 4 m
    • Connection cable between flue gas analyzer and Control Unit, length 5 m
    • testo fast printer with wireless infrared interface, 1 roll of thermal paper and 4 mignon batteries for printing readings out on site
    • testo 610 humidity/temperature measuring instrument
    • DNV Certificate No. TAA00001K0 Rev. 4
    • Nippon Kaiji Kyokai (Class NK) certificate no. TA23536M
    • MED Certificate No. MEDB0000328 Rev. 3 (Module B) and MEDD00002FU (Module D)

    General technical data

    Weight
    Approx. 17 kg
    Dimensions
    22 x 18 x 10 in. (case) / 565 x 455 x 265 mm (case)
    Operating temperature
    41.0° to 113.0 °F / 5 to +45 °C
    Housing
    ABS / ABS-PC fibre glass 10%
    Connectable probes
    1 x combustion air temperature probe; 1 x flue gas probe; 1 x temperature probe; 1 x temperature probe; 1 x differential pressure
    Product colour
    Black
    Standards
    Germanischer Lloyd (DNV GL) Certificate Nippon Kaijik Kyokai (Class NK) certificate according to MARPOL Annex VI and NOx Technical Code 2008
    Power supply
    Li ion rechargeable battery; AC mains unit 100 V to 240 V (50 to 60 Hz)
    Power consumption
    max. 40 W
    Pump flow
    1 l / min. with flow monitoring
    Max. pos. press./flue gas
    0.725 psi / 50 mbar
    Max. neg. press./flue gas
    -4.351 psi / -300 mbar
    Dewpoint calculation
    0.04 °Ctd; 99 °Ctd
    Interface
    IR/IRDA interface; Bluetooth®; USB; data bus; trigger input; Differential Pressure; probe input/ probe inputs; DC-voltage input; Mains connection; dilution gas inlet for measurement range extension
    Storage temperature
    -4.0° to 122.0 °F / -20 to +50 °C

    Accessories

  • Accessories
    Connection cable
    Connection cable.
      :
      0430 0143
    • Accessories
      Standard-Raumklimafühler bis +70 °C
      Standard indoor air quality probe up to +158°F
        :
        0636 9740

        • testo usb driver - for various measuring instruments(v2.9.1, 2.02 MB)
          USB driver for the following devices with USB port: * USB Interface testo 174 / 177 - T + H * testo 300 / 320 / 330 / 330i / 335 / 340 / 350 * testo 435 * testo 556 / 560 / 570 / 580 * testo 635 * testo 735 * testo 845
        Headquarters
        Testo Inc.
        40 White Lake Road
        07871Sparta
        New Jersey
        800-227-0729

        © 2026