Measurements in a laminar flow cabinet in the cleanroom

4 products or recommendations for Measurements in a laminar flow cabinet in the cleanroom
  • testo 480 - Digital temperature, humidity and air flow meter

    Order-Nr. 0563 4800

    Air flow measurements in ducts, temperature measurements in laboratories, humidity measurements in production, pressure difference measurements in clean rooms. The testo 480 digital temperature, humidity and air flow meter comes with a wide range of optional sensors that allow you to measure, analyse and log these and a variety of other parameters with only one device.
    • High-quality optional sensors for measuring air flow, temperature, humidity, pressure, degree of turbulence, heat radiation, CO2, illumination intensity, PMV/PPD and WBGT

    • High-precision, integrated pressure sensor included

    • Pro-software for easy and efficient analysis and logging included

    • Intelligent calibration concept

    ZAR 20 956.65
    excl. VAT
  • Hot wire probe (Ø 10 mm) - for flow, temperature, humidity and pressure

    Order-Nr. 0635 1543

    The hot wire probe (in conjunction with the appropriate measuring instrument) is ideal for determining flow velocity as well as temperature, humidity and pressure in ventilation ducts or at wall or ceiling outlets.
    • 4 functions in 1 probe: measurement of flow, temperature, humidity and absolute pressure

    • With robust, non-rotatable telescope (can be extended to 1100 mm)

    • Intelligent calibration concept

    • Flow measuring range: 0 to +20 m/s

    ZAR 11 454.30
    excl. VAT
  • Vane/temperature probe (Ø 100 mm) - for air outlets

    Order-Nr. 0635 9343

    The vane/temperature probe (in conjunction with the appropriate measuring instrument) is ideal for determining flow velocity and volume flow at ventilation outlets. For measurements at plate outlets and ventilation grilles, it is particularly recommended to use the vane/temperature probe in conjunction with the testo 480 measuring instrument and the testovent 417 funnel set (both available to order).
    • Vane diameter: 100 mm 

    • Integrated temperature measurement up to +60 °C

    • Intelligent calibration concept

    • Flow measuring range: +0.1 to +15 m/s

    ZAR 11 396.00
    excl. VAT
  • Hot wire probe (Ø 10 mm) - for measuring flow and temperature in laboratory fume cupboards

    Order-Nr. 0635 1048

    The hot wire probe (in conjunction with the appropriate measuring instrument) is ideal for determining flow velocity and temperature in laboratory fume cupboards with ultimate precision.
    • Integrated temperature measurement and absolute pressure compensation for accurate measurement results

    • Maximum precision for measuring flow in laboratory fume cupboards according to DIN EN 14175-3/-4

    • Intelligent calibration concept

    • Flow measuring range: 0 to +5 m/s

    ZAR 12 162.15
    excl. VAT
4 Products found