South Africa
  1. Home
  2. Flue gas

Flue gas

77 products or recommendations for Flue gas
  • testo 350

    testo 350 - Analysis Box for exhaust gas analysis systems

    Order-Nr. 0632 3510

    The testo 350 is a rugged, easy-to-use exhaust gas analyzer designed to meet the highest demands when it comes to carrying out precise industrial emission measurements and providing proper data administration. The Analysis Box can be operated with up to 6 gas sensors, 5 of which are optional. This allows you to select freely from sensors for CO, NO, NO2, SO2, H2S, CxHy and CO2.

    • Increased measurement range for unlimited measurements even when gas concentrations are higher

    • Easy-to-change gas sensors and easy access to wearing parts

    • Sealed housing with built-in impact protection for use in harsh conditions

    • Easy operation of the analyzer unit via Control Unit or easyEmission software (both products available separately) 

    Price on Request
    Details
  • testo 340

    testo 340 - Flue gas analyzer for use in industry

    Order-Nr. 0632 3340

    Emission control in industry: the testo 340 flue gas analyzer gives you professional technology, easy handling and practical execution in one instrument. The high-performance testo 340 flue gas analyzer is fitted with an O2 sensor and can be equipped with up to 3 additional sensors.

    • Can measure CO, COlow, NO, NOlow, NO2 or SO2

    • Extended measuring range for use in environments with high gas concentrations

    • Precalibrated gas sensors for quick and easy sensor change

    • Integrated pressure difference and air flow measurements for mass flow calculations

    Price on Request
    Details
  • testo 330-2LL_flue_gas

    testo 330-2 LL

    Order-Nr. 0632 3307 70

    testo 330-2 LL flue gas analyzer with long-life gas sensors and built-in draugh and gas zeroing; BLUETOOTH and with H2-compensated CO-sensor; incl. rech. battery and calibration protocol; with graphic display; version 2010
    Price on Request
    Details
  • testo 350

    testo 350 - Control Unit for exhaust gas analysis systems

    Order-Nr. 0632 3511

    The Control Unit is the supplement to the testo 350 analyzer unit (please order separately) – it enables you to control emission measurement. The testo 350 flue gas analyzer fulfils the highest requirements in industrial emission measurement: easy handling, accurate measuring technology and robust design are practical features which impress on a daily basis.

    • testo 350 Analysis Box just as easy to use when not positioned at measurement site

    • Internal memory for receiving measurement data from the Analysis Box

    • Large graphic color display, robust, industrial-type housing

    • User-friendly application-specific menu guide

    Price on Request
    Details
  • testo 320

    testo 320 set - flue gas analysis set for heating engineers

    Order-Nr. 0563 3220 75

    The ideal equipment for heating engineers: with this testo 320 flue gas analysis set, you can carry out your measuring tasks on heating systems quickly and efficiently. Use the flue gas analyzer to measure flue gas, draught, pressure, ambient CO and CO2, differential temperature and also detect gas leaks. In the set you also get practical accessories to help you with your work.

    • Self-explanatory menu guidance with standardized measuring procedures for quick, easy handling

    • Sensors can be changed, integrated system for monitoring the sensor functions

    • Easy to operate thanks to single-hose connection

    • TÜV-tested according to EN 50379, Part 1-3 and to 1st German Federal Immission Control Ordinance (BImSchV), Part 1-2

    Price on Request
    Details
  • testo 320

    testo 320 - Super efficient flue gas analyzer

    Order-Nr. 0632 3220

    Temperature measurements at radiators; flue gas parameter and pressure measurements at burners; CO measurements in the ambient air: the testo 320 allows you to carry out all measurements in and around heating systems with only one measuring device.

    • Six applications, one device: flue gas, flue draft, pressure, gas leak detection, CO ambient air and pressure difference measurements

    • Integrated flue gas sensors with temperature sensor included; ultra-fine pressure sensors and a wide range of other sensors, ports and probes optional

    • Rugged, high-quality design, high-resolution, multi-color display, self-explanatory menu guide

    • TÜV-tested according to EN 50379, Parts 1-3 and 1st BImSchV

    ZAR 15 180.00
    excl. VAT
    Details
  • testo 350 Maritime

    testo 350 MARITIME - Exhaust gas analyzer for diesel ship engines

    Order-Nr. 0563 3503

    Testo proudly presents the world’s first portable exhaust gas analyzer for diesel ship engines: the testo 350 MARITIME! The groundbreaking exhaust gas analyzer measures emissions at diesel ship engines in compliance with MARPOL Annex VI and NOx Technical Code 2008.

    • With DNV GL and NK certificate according to MARPOL Annexe VI and NOx Technical Code 2008

    • Unrestricted availability thanks to pre-calibrated gas sensors which are exchangeable on site

    • Ready to measure in less than 2 minutes

    • Tested gas sensors — as good as reference measurement technology

    Price on Request
    Details
  • testo 320 basic set

    testo 320 basic set - Flue gas measurement on oil and gas systems

    Order-Nr. 0563 3223 70

    Flue gas measurement on heating systems with a compact flue gas analyzer for oil and gas: the testo 320 basic features all the essential functions for carrying out flue gas analysis, flue draught and pressure measurements. In the set, you get the testo 320 basic flue gas analyzer with practical accessories.

    • Included in the set: testo 320 basic flue gas analyzer including O2 and CO sensor (without H2 compensation), USB mains unit, compact basic flue gas probe 180 mm in length and instrument case

    • 4 applications with just one instrument: flue gas measurement, flue draught measurement, pressure measurement, differential temperature measurement

    • Self-explanatory menu guidance with standardized measuring procedures for quick, easy handling

    • TÜV-tested according to EN 50379, Parts 1 and 3

    Price on Request
    Details
  • testo 300 kit

    testo 300 kit 1 - Flue gas analyzer (O2, CO up to 4,000 ppm)

    Order-Nr. 0564 3002 70

    With this kit, you will be equipped for the most important measurements involving heating systems: the TÜV-tested testo 300 flue gas analyzer is supplied with O2 and CO sensor up to 4,000 ppm, basic flue gas probe, instrument case and practical accessories.

    • Fast and easy to operate: intuitive measurement menus and fast-response Smart-Touch display

    • Including O2 and CO sensor up to 4,000 ppm

    • Large 5-inch HD display – see all the system's measuring values at a glance

    • In the kit: testo 300 flue gas analyzer, including O2 and CO sensor up to 4,000 ppm, mains unit, basic flue gas probe, spare dirt filters, EasyHeat software, instrument case

    ZAR 21 736.00
    excl. VAT
    Details
  • testo 300 kit

    testo 300 kit 2 - flue gas analyzer (O2, CO H2-compensated up to 8,000 ppm)

    Order-Nr. 0564 3002 72

    With this kit, you will be equipped for the most important measurements involving heating systems: the TÜV-tested testo 300 flue gas analyzer is supplied with O2 and CO H2-compensated sensor up to 8,000 ppm, basic flue gas probe, instrument bag and practical accessories.

    • Fast and easy to operate: intuitive measurement menus and fast-response Smart-Touch display

    • Including O2, CO H2-compensated sensor up to 8,000 ppm

    • Large 5-inch HD display – see all the system's measuring values at a glance

    • In the kit: testo 300 flue gas analyzer, including O2 and CO H2-compensated sensor up to 8,000 ppm, mains unit, basic flue gas probe, spare dirt filters, EasyHeat software, instrument bag

    ZAR 25 168.00
    excl. VAT
    Details
  • testo 310 Set

    testo 310 set with printer

    Order-Nr. 0563 3110

    testo 310 incl. battery and calibration protocol for the measurement of O2, CO, hPa and °C; IR printer (0554 3100); probe 180 mm with cone; case; mains unit incl. cable; silicon hose for pressure measurement; particle filter 5 off; 2 rolls spare thermal paper for printer.

    • Robust and light instrument for daily use

    • 30 seconds sensor zeroing

    • Integrated condensate trap

    • Integrated magnets for easy fixing to burner

    ZAR 14 432.00
    excl. VAT
    Details
  • testo 310

    testo 310 - Entry-level flue gas analyzer

    Order-Nr. 0563 3100

    Being a systems mechanic you know only too well how tough things can get when you’re working out in the field. That’s why your measuring tools need to be rugged and reliable. Like the testo 310 flue gas analyzer. Designed especially for use in the field.

    • Direct O2, CO, flue gas and ambient temperature measurements

    • Integrated measurement menu for flue gas, draft, CO ambient air and pressure

    • Quick sensor zero in only 30 seconds

    • Large, backlit digital display, rechargeable lithium battery with up to 10 hours life

    ZAR 11 462.00
    excl. VAT
    Details
  • flue gas probe

    Modular flue gas probe, 300 mm, Ø 8 mm, Tmax 500 °C, TÜV-tested

    Order-Nr. 0600 9761

    TÜV-tested modular flue gas probe with 300 mm long probe shaft including dirt filter and thermocouple. The quick-change click system enables quick, flexible replacement of the probe shaft.

    • Easy probe shaft replacement via quick-change click system

    • Flue gas path and temperature channel can be connected to the instrument via a bayonet lock

    • Integrated dirt filter protects instrument and sensors

    • Integrated thermocouple probe for temperature measurements up to 500 °C

    ZAR 5 192.00
    excl. VAT
    Details
  • Modular flue gas probe

    Modular flue gas probe, 335 mm, Ø 8 mm, Tmax 1000 °C

    Order-Nr. 0600 8764

    The modular flue gas probe with 335 mm long probe shaft including integrated thermocouple up to 1000 °C and quick-change click system (for quick replacement of the probe shaft).

    • Easy probe shaft replacement via quick-change click system

    • NO2/SO2 special hose (length: 2.2 m)

    • Flue gas path and temperature channel can be connected to the instrument via a bayonet lock

    • Integrated thermocouple probe for temperature measurements up to 1000 °C

    ZAR 10 634.00
    excl. VAT
    Details
  • Combustion air temperature probe

    Combustion air temperature probe (190 mm immersion depth)

    Order-Nr. 0600 9787

    The probe is used for the specific measurement of combustion air temperature within the context of flue gas or particulate matter measurements.

    • Flexible positioning (immersion depth 190 mm, cable length 2.2 m) 

    • Cone for attachment included

    • Measuring range: 0 to +100 °C

    ZAR 2 178.00
    excl. VAT
    Details
  • clearance-probe-for-O2-supply-air-measurement

    Dual wall clearance probe for O2 supply air measurement

    Order-Nr. 0632 1260

    The dual wall clearance probe (in combination with the appropriate measuring instrument) enables easy and reliable measurement of O2 supply air in the dual wall clearance. In addition, it can also be used to check the dual wall clearance for leaks and blockages.

    • Detection of leaks and blockages in the dual wall clearance

    • Curved probe for easy insertion into the dual wall clearance

    ZAR 2 948.00
    excl. VAT
    Details
  • 0600-7610

    Industrial probe kit 1200°C

    Order-Nr. 0600 7610

    Ideal for the extractive sampling of flue gas at high flue gas temperatures. The industrial probe kit 1200°C comprises a handle, a probe shaft up to 1200°C flue gas temperature, a 4 m long gas sampling hose, including inline filter (all three unheated) and a thermocouple type K.

    • Can be used in combination with testo 340 and testo 350

    • Additional inline filter to protect the gas sampling hose from contamination

    • Unheated sampling tube (1 200 °C) can be extended up to max. 3 m using optional extension tubes

    • Very easy to handle

    ZAR 24 414.00
    excl. VAT
    Details
  • 0600-9766-modular-flue-gas-probe

    Modular flue gas probe, 335 mm, Ø 8 mm, Tmax 500 °C

    Order-Nr. 0600 9766

    The modular flue gas probe with 335 mm long probe shaft including integrated thermocouple up to 500 °C and quick-change click system (for quick replacement of the probe shaft).

    • Easy probe shaft replacement via quick-change click system

    • NO2/SO2 special hose (length: 2.2 m)

    • Flue gas path and temperature channel can be connected to the instrument via a bayonet lock

    • Integrated thermocouple probe for temperature measurements up to 500 °C

    ZAR 6 578.00
    excl. VAT
    Details
  • Modular flue gas probe, 700 mm, 500 °C

    Modular flue gas probe, 700 mm, Ø 8 mm, Tmax 500 °C

    Order-Nr. 0600 9767

    The modular flue gas probe with 700 mm long probe shaft including integrated thermocouple up to 500 °C and quick-change click system (for quick replacement of the probe shaft).

    • Easy probe shaft replacement via quick-change click system

    • NO2/SO2 special hose (length: 2.2 m)

    • Flue gas path and temperature channel can be connected to the instrument via a bayonet lock

    • Integrated thermocouple probe for temperature measurements up to 500 °C

    ZAR 8 008.00
    excl. VAT
    Details
  • Flue gas probe modular 700 mm 500 °C 0600 876

    Modular flue gas probe 700 mm, Ø 8 mm, Tmax 1000 °C

    Order-Nr. 0600 8765

    The modular flue gas probe with 700 mm long probe shaft including integrated thermocouple up to 1000 °C and quick-change click system (for quick replacement of the probe shaft).

    • Easy probe shaft replacement via quick-change click system

    • NO2/SO2 special hose (length: 2.2 m)

    • Flue gas path and temperature channel can be connected to the instrument via a bayonet lock

    • Integrated thermocouple probe for temperature measurements up to 1000 °C

    ZAR 12 766.00
    excl. VAT
    Details
77 Products found
Show More